# packages

pkgId: 601e55c5a98a6ede63243848890f50030ad3e3c6ef17af39cfea959c36bbdbc5
name: perl-Attribute-Handlers
arch: noarch
version: 0.99
epoch: 0
release: 404.module+el8.1.0+2926+ce7246ad
summary: Simpler definition of attribute handlers
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Attribute-Handlers-0.99-404.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This Perl module, when inherited by a package, allows that package's class to
  define attribute handler subroutines for specific attributes. Variables and
  subroutines subsequently defined in that package, or in packages derived from
  that package may be given attributes with the same names as the attribute
  handler subroutines, which will then be called in one of the compilation
  phases (i.e. in a "BEGIN", "CHECK", "INIT", or "END" block).


pkgId: 97e4ef4865020434066726851f5f708a5b1c8cc4831b02f73291caeff14f7430
name: perl-Authen-SASL
arch: noarch
version: 2.16
epoch: 0
release: 13.el8
summary: SASL Authentication framework for Perl
url: http://search.cpan.org/dist/Authen-SASL/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: el-builder3-ab.linuxpolska.pl
rpm_sourcerpm: perl-Authen-SASL-2.16-13.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Authen-SASL-2.16-13.el8.noarch.rpm
checksum_type: sha256
description:
  SASL is a generic mechanism for authentication used by several network
  protocols. Authen::SASL provides an implementation framework that all
  protocols should be able to share.


pkgId: 52edcaf5d036029d2de121e020ec9b8587ade03cdf537dee279269d467d8b98b
name: perl-AutoLoader
arch: noarch
version: 5.74
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Load subroutines only on demand
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-AutoLoader-5.74-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  The AutoLoader module works with the AutoSplit module and the "__END__" token
  to defer the loading of some subroutines until they are used rather than
  loading them all at once.


pkgId: 3124bce3755ba2444c338c5354c1a761667776c4dc45561d8350b9a68bf8cb00
name: perl-AutoSplit
arch: noarch
version: 5.74
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Split a package for automatic loading
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-AutoSplit-5.74-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  Split up your program into files that the AutoLoader module can handle. It is
  used by both the standard Perl libraries and by the ExtUtils::MakeMaker
  utility, to automatically configure libraries for automatic loading.


pkgId: 799ea1ca7a2f0bf212903588a0fc6742cbcda7488f3cc0be29b1e6934b1cbc35
name: perl-B
arch: x86_64
version: 1.80
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Perl compiler backend
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-B-1.80-471.module+el8.6.0+13324+628a2397.x86_64.rpm
checksum_type: sha256
description:
  The "B" module supplies classes which allow a Perl program to delve into its
  own innards. It is the module used to implement the backends of the Perl
  compiler.


pkgId: 737a220b96636f28f1bf840ad318b08123abbda0a643e23b076e47163a8ba12b
name: perl-B-Debug
arch: noarch
version: 1.24
epoch: 0
release: 3.module+el8.1.0+2926+ce7246ad
summary: Walk Perl syntax tree, print debug information about op-codes
url: http://search.cpan.org/dist/B-Debug/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-B-Debug-1.24-3.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-B-Debug-1.24-3.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  Walk Perl syntax tree and print debug information about op-codes. See
  B::Concise and B::Terse for other details.


pkgId: f67ff7817575f29072eac0e8dd13a4351c42e0619cc6e02b5400cc98e61f057a
name: perl-B-Lint
arch: noarch
version: 1.20
epoch: 0
release: 11.el8
summary: Perl lint
url: http://search.cpan.org/dist/B-Lint/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-B-Lint-1.20-11.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-B-Lint-1.20-11.el8.noarch.rpm
checksum_type: sha256
description:
  The B::Lint module is equivalent to an extended version of the -w option of
  perl. It is named after the program lint which carries out a similar process
  for C programs.


pkgId: 2bcbe8227a5e5e01ff5071c36137bc200b1b089e80a521b598a20c1b25cf6c52
name: perl-Benchmark
arch: noarch
version: 1.23
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Benchmark running times of Perl code
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Benchmark-1.23-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  The Benchmark module encapsulates a number of routines to help you figure out
  how long it takes to execute some code.


pkgId: a1a34b0d259d33cf42d2e2bb58031f3540849d86e66bbc25290a4a2f2b3d5206
name: perl-Bit-Vector
arch: x86_64
version: 7.4
epoch: 0
release: 11.el8
summary: Efficient bit vector, set of integers and "big int" math library
url: http://search.cpan.org/dist/Bit-Vector/
rpm_license: (GPLv2+ or Artistic) and LGPLv2+
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Bit-Vector-7.4-11.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Bit-Vector-7.4-11.el8.x86_64.rpm
checksum_type: sha256
description:
  Bit::Vector is an efficient C library which allows you to handle bit
  vectors, sets (of integers), "big integer arithmetic" and boolean
  matrices, all of arbitrary sizes.

  The library is efficient (in terms of algorithmical complexity) and
  therefore fast (in terms of execution speed) for instance through the
  widespread use of divide-and-conquer algorithms.


pkgId: b388247e74bb325848ad3273f2b229825debeed2f0b545a8299246f19581d007
name: perl-CGI
arch: noarch
version: 4.38
epoch: 0
release: 2.el8
summary: Handle Common Gateway Interface requests and responses
url: http://search.cpan.org/dist/CGI
rpm_license: (GPL+ or Artistic) and Artistic 2.0
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: el-builder3-ab.linuxpolska.pl
rpm_sourcerpm: perl-CGI-4.38-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-CGI-4.38-2.el8.noarch.rpm
checksum_type: sha256
description:
  CGI.pm is a stable, complete and mature solution for processing and preparing
  HTTP requests and responses. Major features including processing form
  submissions, file uploads, reading and writing cookies, query string
  generation and manipulation, and processing and preparing HTTP headers. Some
  HTML generation utilities are included as well.

  CGI.pm performs very well in in a vanilla CGI.pm environment and also comes
  with built-in support for mod_perl and mod_perl2 as well as FastCGI.


pkgId: aa998e1d09009ebf4272e043a49fd9cf820c31d4f0ccb3bf51293345a5c1e1a7
name: perl-CPAN
arch: noarch
version: 2.16
epoch: 0
release: 2.module+el8.1.0+2926+ce7246ad
summary: Query, download and build perl modules from CPAN sites
url: http://search.cpan.org/dist/CPAN/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-CPAN-2.16-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-CPAN-2.16-2.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  The CPAN module automates or at least simplifies the make and install of
  perl modules and extensions. It includes some primitive searching
  capabilities and knows how to use LWP, HTTP::Tiny, Net::FTP and certain
  external download clients to fetch distributions from the net.


pkgId: 1c2390a10209f1cd34751fc91a01a61ecf9e1c8c7fb0e532fcad25c226b62616
name: perl-CPAN-DistnameInfo
arch: noarch
version: 0.12
epoch: 0
release: 13.module+el8.2.0+4278+29f88ddb
summary: Extract distribution name and version from a distribution filename
url: http://search.cpan.org/dist/CPAN-DistnameInfo/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: perl-CPAN-DistnameInfo-0.12-13.module+el8.2.0+4278+29f88ddb.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-CPAN-DistnameInfo-0.12-13.module+el8.2.0+4278+29f88ddb.noarch.rpm
checksum_type: sha256
description:
  Many online services that are centered around CPAN attempt to
  associate multiple uploads by extracting a distribution name from the
  filename of the upload. For most distributions this is easy as they
  have used ExtUtils::MakeMaker or Module::Build to create the
  distribution, which results in a uniform name. But sadly not all
  uploads are created in this way.

  CPAN::DistnameInfo uses heuristics that have been learnt by
  http://search.cpan.org/ to extract the distribution name and version
  from filenames and also report if the version is to be treated as a
  developer release.


pkgId: 26ef3fe4cc1b14a80c2e35cf6c8f43d7162f437f8997189b17be698af70b0590
name: perl-CPAN-Meta
arch: noarch
version: 2.150010
epoch: 0
release: 396.el8
summary: Distribution metadata for a CPAN dist
url: http://search.cpan.org/dist/CPAN-Meta/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-CPAN-Meta-2.150010-396.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-CPAN-Meta-2.150010-396.el8.noarch.rpm
checksum_type: sha256
description:
  Software distributions released to the CPAN include a META.json or, for older
  distributions, META.yml, which describes the distribution, its contents, and
  the requirements for building and installing the distribution. The data
  structure stored in the META.json file is described in CPAN::Meta::Spec.


pkgId: ee5d3a9f6b0fac2cfb0d02eb996f53462023e74cf18330a5d40552d14ac92409
name: perl-CPAN-Meta-Requirements
arch: noarch
version: 2.140
epoch: 0
release: 396.el8
summary: Set of version requirements for a CPAN dist
url: http://search.cpan.org/dist/CPAN-Meta-Requirements/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-CPAN-Meta-Requirements-2.140-396.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-CPAN-Meta-Requirements-2.140-396.el8.noarch.rpm
checksum_type: sha256
description:
  A CPAN::Meta::Requirements object models a set of version constraints like
  those specified in the META.yml or META.json files in CPAN distributions. It
  can be built up by adding more and more constraints, and it will reduce them
  to the simplest representation.

  Logically impossible constraints will be identified immediately by thrown
  exceptions.


pkgId: f157cd5a9f5d4e12e5b88a40606177509958d77029b1581a71698a10a638ff2d
name: perl-CPAN-Meta-YAML
arch: noarch
version: 0.018
epoch: 0
release: 1001.module+el8.1.0+2926+ce7246ad
summary: Read and write a subset of YAML for CPAN Meta files
url: http://search.cpan.org/dist/CPAN-Meta-YAML/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-CPAN-Meta-YAML-0.018-1001.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-CPAN-Meta-YAML-0.018-1001.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This module implements a subset of the YAML specification for use in reading
  and writing CPAN metadata files like META.yml and MYMETA.yml. It should not be
  used for any other general YAML parsing or generation task.


pkgId: 6ec47866a39fed7c8a294128d239421c0d2c9712c9a66b81cc5e95930d5826a3
name: perl-Carp
arch: noarch
version: 1.40
epoch: 0
release: 367.module+el8.1.0+2926+ce7246ad
summary: Alternative warn and die for modules
url: http://search.cpan.org/dist/Carp/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Carp-1.40-367.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Carp-1.40-367.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  The Carp routines are useful in your own modules because they act like
  die() or warn(), but with a message which is more likely to be useful to a
  user of your module. In the case of cluck, confess, and longmess that
  context is a summary of every call in the call-stack. For a shorter message
  you can use carp or croak which report the error as being from where your
  module was called. There is no guarantee that that is where the error was,
  but it is a good educated guess.


pkgId: 1e5b57a71f5e837be1eb35c0f8ea67ca8a9160b02c2e979f62c40f9e6a2fa809
name: perl-Carp-Clan
arch: noarch
version: 6.06
epoch: 0
release: 6.el8
summary: Perl module to print improved warning messages
url: http://search.cpan.org/dist/Carp-Clan/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Carp-Clan-6.06-6.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Carp-Clan-6.06-6.el8.noarch.rpm
checksum_type: sha256
description:
  This module reports errors from the perspective of the caller of a
  "clan" of modules, similar to "Carp.pm" itself. But instead of giving
  it a number of levels to skip on the calling stack, you give it a
  pattern to characterize the package names of the "clan" of modules
  which shall never be blamed for any error.


pkgId: 1c1a4a4e0c471b2e2b30dd58ab36ec80dcdba644c78e3e14e19b512709e5b259
name: perl-Class-ISA
arch: noarch
version: 0.36
epoch: 0
release: 1022.el8
summary: Report the search path for a class's ISA tree
url: http://search.cpan.org/dist/Class-ISA/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Class-ISA-0.36-1022.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Class-ISA-0.36-1022.el8.noarch.rpm
checksum_type: sha256
description:
  This library provides functions that return the list (in order) of names of
  (super-)classes Perl would search to find a method, with no duplicates.


pkgId: eb11c1a9ae867cffc1b0fc38cb949b02595c79d1646e51e60ef6ee56bf3ad23e
name: perl-Class-Inspector
arch: noarch
version: 1.32
epoch: 0
release: 2.el8
summary: Get information about a class and its structure
url: http://search.cpan.org/dist/Class-Inspector/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Class-Inspector-1.32-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Class-Inspector-1.32-2.el8.noarch.rpm
checksum_type: sha256
description:
  Class::Inspector allows you to get information about a loaded class.
  Most or all of this information can be found in other ways, but they aren't
  always very friendly, and usually involve a relatively high level of Perl
  wizardry, or strange and unusual looking code. Class::Inspector attempts to
  provide an easier, more friendly interface to this information.


pkgId: 2e9a1a68505ce76e9edece97483ca2331ec6dc8abdcf24feb97fa89aa21352f0
name: perl-Class-Struct
arch: noarch
version: 0.66
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Declare struct-like data types as Perl classes
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Class-Struct-0.66-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  Class::Struct module exports a single function struct(). Given a list of
  element names and types, and optionally a class name, struct() creates a
  Perl 5 class that implements a struct-like data structure.


pkgId: 42d2baa4e038bde06cf55baacfeee27f82549d0edde066a511f8915f6068df1d
name: perl-Compress-Bzip2
arch: x86_64
version: 2.26
epoch: 0
release: 6.el8
summary: Interface to Bzip2 compression library
url: http://search.cpan.org/dist/Compress-Bzip2/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Compress-Bzip2-2.26-6.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Compress-Bzip2-2.26-6.el8.x86_64.rpm
checksum_type: sha256
description:
  The Compress::Bzip2 module provides a Perl interface to the Bzip2 compression
  library. A relevant subset of the functionality provided by Bzip2 is available
  in Compress::Bzip2. Compress::Bzip2 is not well integrated into PerlIO, use
  the preferred IO::Compress::Bzip2 instead.


pkgId: d316e716ba72530b51fcc6c8c541949e9bcad603742f3fc35c3944999682c3ba
name: perl-Compress-Raw-Bzip2
arch: x86_64
version: 2.074
epoch: 0
release: 2.module+el8.1.0+2926+ce7246ad
summary: Low-level interface to bzip2 compression library
url: http://search.cpan.org/dist/Compress-Raw-Bzip2/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Compress-Raw-Bzip2-2.074-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Compress-Raw-Bzip2-2.074-2.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  This module provides a Perl interface to the bzip2 compression library.
  It is used by IO::Compress::Bzip2.


pkgId: cd53529fc4ce56900650f35cc82e0a43789f709a328499d0d53f3cc31c4d25c4
name: perl-Compress-Raw-Lzma
arch: x86_64
version: 2.096
epoch: 0
release: 1.module+el8.6.0+13324+628a2397
summary: Low-level interface to lzma compression library
url: https://metacpan.org/release/Compress-Raw-Lzma
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-Compress-Raw-Lzma-2.096-1.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Compress-Raw-Lzma-2.096-1.module+el8.6.0+13324+628a2397.x86_64.rpm
checksum_type: sha256
description:
  This module provides a Perl interface to the lzma compression library.
  It is used by IO::Compress::Lzma.


pkgId: eba9a9501ea6af57ae01a8a0efbf6860094e47107fdcef9db5451267bb5feb22
name: perl-Compress-Raw-Zlib
arch: x86_64
version: 2.074
epoch: 0
release: 2.module+el8.1.0+2926+ce7246ad
summary: Low-level interface to the zlib compression library
url: http://search.cpan.org/dist/Compress-Raw-Zlib/
rpm_license: (GPL+ or Artistic) and zlib
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Compress-Raw-Zlib-2.074-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Compress-Raw-Zlib-2.074-2.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  The Compress::Raw::Zlib module provides a Perl interface to the zlib
  compression library, which is used by IO::Compress::Zlib.


pkgId: b725ab92751fad586aa9aa864d834c00b04a09b4f8f96961e2a6b83f6a9cb4ae
name: perl-Config-Extensions
arch: noarch
version: 0.03
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Hash lookup of which Perl core extensions were built
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Config-Extensions-0.03-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  The Config::Extensions module provides a hash %Extensions containing all the
  core extensions that were enabled for this perl.


pkgId: 585a631e9ce26e92ee0d33bdbbb44ad4fc26f413c96c68612b455ff30d3f346d
name: perl-Config-Perl-V
arch: noarch
version: 0.27
epoch: 0
release: 3.module+el8.1.0+2926+ce7246ad
summary: Structured data retrieval of perl -V output
url: http://search.cpan.org/dist/Config-Perl-V/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Config-Perl-V-0.27-3.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Config-Perl-V-0.27-3.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  The command "perl -V" will return you an excerpt from the %Config::Config
  hash combined with the output of "perl -V" that is not stored inside the hash,
  but only available to the perl binary itself. This package provides Perl
  module that will return you the output of "perl -V" in a structure.


pkgId: 03fd68752bfc81c36915cf8b0f43ba9471a6c9800fb6c6cf01b2d388195b78f7
name: perl-Crypt-OpenSSL-Bignum
arch: x86_64
version: 0.09
epoch: 0
release: 5.el8
summary: Perl interface to OpenSSL for Bignum
url: https://metacpan.org/release/Crypt-OpenSSL-Bignum
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Crypt-OpenSSL-Bignum-0.09-5.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Crypt-OpenSSL-Bignum-0.09-5.el8.x86_64.rpm
checksum_type: sha256
description:
  Crypt::OpenSSL::Bignum provides access to OpenSSL multiprecision integer
  arithmetic libraries. Presently, many though not all of the arithmetic
  operations that OpenSSL provides are exposed to perl. In addition, this
  module can be used to provide access to bignum values produced by other
  OpenSSL modules, such as key parameters from Crypt::OpenSSL::RSA.


pkgId: 46e090b01160899216246139e411fce1a1cd5346ca60fb8c3e1382d531842e8a
name: perl-Crypt-OpenSSL-Random
arch: x86_64
version: 0.15
epoch: 0
release: 3.el8
summary: OpenSSL/LibreSSL pseudo-random number generator access
url: https://metacpan.org/release/Crypt-OpenSSL-Random
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Crypt-OpenSSL-Random-0.15-3.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Crypt-OpenSSL-Random-0.15-3.el8.x86_64.rpm
checksum_type: sha256
description:
  Crypt::OpenSSL::Random provides the ability to seed and query the OpenSSL
  and LibreSSL library's pseudo-random number generators.


pkgId: f6fbcba4a2a7d4e8657f6134c3c10c31e44b1072f4839b61bb5fef04457583ae
name: perl-DBD-MySQL
arch: x86_64
version: 4.046
epoch: 0
release: 3.module+el8.1.0+2938+301254e2
summary: A MySQL interface for Perl
url: http://search.cpan.org/dist/DBD-mysql/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: c6
rpm_sourcerpm: perl-DBD-MySQL-4.046-3.module+el8.1.0+2938+301254e2.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-DBD-MySQL-4.046-3.module+el8.1.0+2938+301254e2.x86_64.rpm
checksum_type: sha256
description:
  DBD::mysql is the Perl5 Database Interface driver for the MySQL database. In
  other words: DBD::mysql is an interface between the Perl programming language
  and the MySQL programming API that comes with the MySQL relational database
  management system.


pkgId: 1ebf934866f36030fa5923d04ad17488e9ab3962cd3b743887e88c0b7a6990f1
name: perl-DBD-SQLite
arch: x86_64
version: 1.58
epoch: 0
release: 2.module+el8.1.0+2940+55ca6856
summary: SQLite DBI Driver
url: http://search.cpan.org/dist/DBD-SQLite/
rpm_license: (GPL+ or Artistic) and Public Domain
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-DBD-SQLite-1.58-2.module+el8.1.0+2940+55ca6856.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-DBD-SQLite-1.58-2.module+el8.1.0+2940+55ca6856.x86_64.rpm
checksum_type: sha256
description:
  SQLite is a public domain RDBMS database engine that you can find at
  http://www.hwaci.com/sw/sqlite/.

  This module provides a SQLite RDBMS module that uses the system SQLite
  libraries.


pkgId: c5efebcd6a68caff1de66401451ab06bc9ee7bf4dc151082a143a3bbdb3603d7
name: perl-DBI
arch: x86_64
version: 1.641
epoch: 0
release: 3.module+el8.3.0+6481+49275ac5
summary: A database access API for perl
url: http://dbi.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: perl-DBI-1.641-3.module+el8.3.0+6481+49275ac5.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-DBI-1.641-3.module+el8.3.0+6481+49275ac5.x86_64.rpm
checksum_type: sha256
description:
  DBI is a database access Application Programming Interface (API) for
  the Perl Language. The DBI API Specification defines a set of
  functions, variables and conventions that provide a consistent
  database interface independent of the actual database being used.


pkgId: df16c6c232c5cc59b0d28f74056ba06baa9b74e6948de6fd708a1ba00913c3cd
name: perl-DBM_Filter
arch: noarch
version: 0.06
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Filter DBM keys and values
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-DBM_Filter-0.06-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This module provides an interface that allows filters to be applied to tied
  hashes associated with DBM files.


pkgId: 5d35a9933af9d25521591dd2d0f843eeca2d8f4a12750e0d1604d6bcf5f85197
name: perl-DB_File
arch: x86_64
version: 1.842
epoch: 0
release: 1.el8
summary: Perl5 access to Berkeley DB version 1.x
url: https://metacpan.org/release/DB_File
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-DB_File-1.842-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-DB_File-1.842-1.el8.x86_64.rpm
checksum_type: sha256
description:
  DB_File is a module which allows Perl programs to make use of the facilities
  provided by Berkeley DB version 1.x (if you have a newer version of DB, you
  will be limited to functionality provided by interface of version 1.x). The
  interface defined here mirrors the Berkeley DB interface closely.


pkgId: ae3e9450f3c99ed8213e5d8424ae4e51ed43a0094b551e84a7571f76c236d464
name: perl-Data-Dump
arch: noarch
version: 1.23
epoch: 0
release: 7.el8
summary: Pretty printing of data structures
url: http://search.cpan.org/dist/Data-Dump/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: i686.ab.2
rpm_sourcerpm: perl-Data-Dump-1.23-7.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Data-Dump-1.23-7.el8.noarch.rpm
checksum_type: sha256
description:
  This module provides a single function called dump() that takes a list of
  values as its argument and produces a string as its result. The string
  contains Perl code that, when evaled, produces a deep copy of the original
  arguments. The string is formatted for easy reading.


pkgId: f3f779740db59f96a524de080ab6e1733935f575d0af81b0b123187e4d06c569
name: perl-Data-Dumper
arch: x86_64
version: 2.161
epoch: 0
release: 5.module+el8.1.0+2926+ce7246ad
summary: Stringify perl data structures, suitable for printing and eval
url: http://search.cpan.org/dist/Data-Dumper/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Data-Dumper-2.161-5.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Data-Dumper-2.161-5.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  Given a list of scalars or reference variables, writes out their contents
  in perl syntax. The references can also be objects. The content of each
  variable is output in a single Perl statement. Handles self-referential
  structures correctly.


pkgId: b729d9e66a9e286de7bc771389048940341d094297f720d9be02eb2f1e04058b
name: perl-Data-OptList
arch: noarch
version: 0.110
epoch: 0
release: 6.el8
summary: Parse and validate simple name/value option pairs
url: http://search.cpan.org/dist/Data-OptList/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Data-OptList-0.110-6.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Data-OptList-0.110-6.el8.noarch.rpm
checksum_type: sha256
description:
  Hashes are great for storing named data, but if you want more than one entry
  for a name, you have to use a list of pairs. Even then, this is really boring
  to write:

  $values = [
      foo => undef,
      bar => undef,
      baz => undef,
      xyz => { ... },
  ];

  With Data::OptList, you can do this instead:

  $values = Data::OptList::mkopt([
      qw(foo bar baz),
      xyz => { ... },
  ]);

  This works by assuming that any defined scalar is a name and any reference
  following a name is its value.


pkgId: f3d61c87505a770082d4573122207947079cb7c25f0f8d453b280f6b0c70103d
name: perl-Data-Section
arch: noarch
version: 0.200006
epoch: 0
release: 9.module+el8.1.0+2926+ce7246ad
summary: Read multiple hunks of data out of your DATA section
url: http://search.cpan.org/dist/Data-Section/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Data-Section-0.200006-9.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Data-Section-0.200006-9.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  Data::Section provides an easy way to access multiple named chunks of
  line-oriented data in your module's DATA section. It was written to allow
  modules to store their own templates, but probably has other uses.


pkgId: 4850aafe711cee8d647411d1740df5af89643a85d74a0b5ab6f5e0897f95bf10
name: perl-Date-Calc
arch: noarch
version: 6.4
epoch: 0
release: 9.el8
summary: Gregorian calendar date calculations
url: http://search.cpan.org/dist/Date-Calc/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Date-Calc-6.4-9.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Date-Calc-6.4-9.el8.noarch.rpm
checksum_type: sha256
description:
  The library provides all sorts of date calculations based on the
  Gregorian calendar (the one used in all western countries today),
  thereby complying with all relevant norms and standards: ISO/R
  2015-1971, DIN 1355 and, to some extent, ISO 8601 (where applicable).


pkgId: 79493dcbb8bafa60322d902a5f72a7013e01f18007119b03187be7d908887a70
name: perl-Devel-PPPort
arch: x86_64
version: 3.36
epoch: 0
release: 5.el8
summary: Perl Pollution Portability header generator
url: http://search.cpan.org/dist/Devel-PPPort/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Devel-PPPort-3.36-5.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Devel-PPPort-3.36-5.el8.x86_64.rpm
checksum_type: sha256
description:
  Perl's API has changed over time, gaining new features, new functions,
  increasing its flexibility, and reducing the impact on the C name space
  environment (reduced pollution). The header file written by this module,
  typically ppport.h, attempts to bring some of the newer Perl API features
  to older versions of Perl, so that you can worry less about keeping track
  of old releases, but users can still reap the benefit.


pkgId: 5f3750d1bd63be4b1f8c654ae86451bdf765200f33632f5628a762b432d94d41
name: perl-Devel-Peek
arch: x86_64
version: 1.23
epoch: 0
release: 404.module+el8.1.0+2926+ce7246ad
summary: A data debugging tool for the XS programmer
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Devel-Peek-1.23-404.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  Devel::Peek contains functions which allows raw Perl datatypes to be
  manipulated from a Perl script. This is used by those who do XS programming to
  check that the data they are sending from C to Perl looks as they think it
  should look.


pkgId: 6207e36caaa11eed373833461b8a1284cb12af355d47134032c06781476eac49
name: perl-Devel-Peek
arch: x86_64
version: 1.26
epoch: 0
release: 419.el8
summary: A data debugging tool for the XS programmer
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: baseos.ab
rpm_sourcerpm: perl-5.26.3-419.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Devel-Peek-1.26-419.el8.x86_64.rpm
checksum_type: sha256
description:
  Devel::Peek contains functions which allows raw Perl data types to be
  manipulated from a Perl script. This is used by those who do XS programming to
  check that the data they are sending from C to Perl looks as they think it
  should look.


pkgId: 68d3b367594215feb3157298a78d7bb8abb1feaba4e9b6c485c6daa22cc3dfd0
name: perl-Devel-SelfStubber
arch: noarch
version: 1.05
epoch: 0
release: 404.module+el8.1.0+2926+ce7246ad
summary: Generate stubs for a SelfLoading module
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Devel-SelfStubber-1.05-404.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  Devel::SelfStubber prints the stubs you need to put in the module before the
  __DATA__ token (or you can get it to print the entire module with stubs
  correctly placed). The stubs ensure that if a method is called, it will get
  loaded. They are needed specifically for inherited autoloaded methods.


pkgId: 119e3a24c5aa379b44f7e96c1d0ea578934be9a4fb6f8d880596e6349501a07d
name: perl-Devel-Size
arch: x86_64
version: 0.81
epoch: 0
release: 2.el8
summary: Perl extension for finding the memory usage of Perl variables
url: http://search.cpan.org/dist/Devel-Size/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Devel-Size-0.81-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Devel-Size-0.81-2.el8.x86_64.rpm
checksum_type: sha256
description:
  This module figures out the real sizes of Perl variables in bytes. Call
  functions with a reference to the variable you want the size of. If the
  variable is a plain scalar it returns the size of the scalar. If the
  variable is a hash or an array, use a reference when calling.


pkgId: 202766230719fb3ae386f9fd612798c5896d6c44ea255d364f494c0e0691a123
name: perl-Digest
arch: noarch
version: 1.17
epoch: 0
release: 395.el8
summary: Modules that calculate message digests
url: http://search.cpan.org/dist/Digest/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Digest-1.17-395.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Digest-1.17-395.el8.noarch.rpm
checksum_type: sha256
description:
  The Digest:: modules calculate digests, also called "fingerprints" or
  "hashes", of some data, called a message. The digest is (usually)
  some small/fixed size string. The actual size of the digest depend of
  the algorithm used. The message is simply a sequence of arbitrary
  bytes or bits.


pkgId: 0e78c6188cc212f36756f4d52a7a8583a6289f0071ee96d89b44819b89886cf9
name: perl-Digest
arch: noarch
version: 1.20
epoch: 0
release: 1.module+el8.6.0+13324+628a2397
summary: Modules that calculate message digests
url: https://metacpan.org/release/Digest
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-Digest-1.20-1.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Digest-1.20-1.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  The Digest:: modules calculate digests, also called "fingerprints" or
  "hashes", of some data, called a message. The digest is (usually) some
  small/fixed size string. The actual size of the digest depends of the
  algorithm used. The message is simply a sequence of arbitrary bytes or bits.


pkgId: 6ba65ea4e0d0cd61b3f1e5fb48a727c74813cc64e76d7382d96f37f468ce08bc
name: perl-Digest-HMAC
arch: noarch
version: 1.03
epoch: 0
release: 17.el8
summary: Keyed-Hashing for Message Authentication
url: http://search.cpan.org/dist/Digest-HMAC/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: i686.ab.2
rpm_sourcerpm: perl-Digest-HMAC-1.03-17.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Digest-HMAC-1.03-17.el8.noarch.rpm
checksum_type: sha256
description:
  HMAC is used for message integrity checks between two parties that
  share a secret key, and works in combination with some other Digest
  algorithm, usually MD5 or SHA-1. The HMAC mechanism is described in
  RFC 2104.

  HMAC follow the common Digest:: interface, but the constructor takes
  the secret key and the name of some other simple Digest:: as argument.


pkgId: 9b9bfb467b3d01a75b6dc5bc36a38b2f9ab59018c6fb253deb2d0376496d96f1
name: perl-Digest-MD5
arch: x86_64
version: 2.55
epoch: 0
release: 396.el8
summary: Perl interface to the MD5 algorithm
url: http://search.cpan.org/dist/Digest-MD5/
rpm_license: (GPL+ or Artistic) and BSD
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Digest-MD5-2.55-396.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Digest-MD5-2.55-396.el8.x86_64.rpm
checksum_type: sha256
description:
  The Digest::MD5 module allows you to use the RSA Data Security Inc. MD5
  Message Digest algorithm from within Perl programs. The algorithm takes as
  input a message of arbitrary length and produces as output a 128-bit
  "fingerprint" or "message digest" of the input.


pkgId: 584816509fb6b4b5c473181953acf64b58ec2cf721127328671291d39e2fc285
name: perl-Digest-SHA
arch: x86_64
version: 6.02
epoch: 1
release: 1.el8
summary: Perl extension for SHA-1/224/256/384/512
url: http://search.cpan.org/dist/Digest-SHA/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Digest-SHA-6.02-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Digest-SHA-6.02-1.el8.x86_64.rpm
checksum_type: sha256
description:
  Digest::SHA is a complete implementation of the NIST Secure Hash Standard. It
  gives Perl programmers a convenient way to calculate SHA-1, SHA-224, SHA-256,
  SHA-384, SHA-512, SHA-512/224, and SHA-512/256 message digests. The module can
  handle all types of input, including partial-byte data.


pkgId: c2f0df9a0af65e1ab2a2cc7d171f13d1a6d680100d47fa68399dab36408b5fd9
name: perl-DirHandle
arch: noarch
version: 1.05
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Supply object methods for directory handles
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-DirHandle-1.05-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  There is no reason to use this module nowadays. The DirHandle module provides
  an alternative interface to the opendir(), closedir(), readdir(), and
  rewinddir() functions. Since Perl 5.6, opendir() alone has been all you need
  for lexical handles.


pkgId: fef470e9585a908d0bb998c27c0154865dd59b4c8a4c589f39e1878bc377bbe5
name: perl-DynaLoader
arch: x86_64
version: 1.47
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Dynamically load C libraries into Perl code
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-DynaLoader-1.47-471.module+el8.6.0+13324+628a2397.x86_64.rpm
checksum_type: sha256
description:
  The DynaLoader module defines a standard generic interface to the dynamic
  linking mechanisms available on many platforms. Its primary purpose is to
  implement automatic dynamic loading of Perl modules. For a simpler interface,
  see XSLoader module.


pkgId: 8e508833f85206279a3155bbbf78551b7b5d8c3007fa4302d523f0a4c3c47737
name: perl-Encode
arch: x86_64
version: 2.88
epoch: 4
release: 7.module+el8.1.0+2926+ce7246ad
summary: Character encodings in Perl
url: http://search.cpan.org/dist/Encode/
rpm_license: (GPL+ or Artistic) and Artistic 2.0 and UCD
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Encode-2.88-7.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Encode-2.88-7.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  The Encode module provides the interface between Perl strings and the rest
  of the system. Perl strings are sequences of characters.


pkgId: 5bc8f91e45ecd7c641053daaa382d00fa9e8202bf696749fc55772f4a6f6e0af
name: perl-Encode-Detect
arch: x86_64
version: 1.01
epoch: 0
release: 28.el8
summary: Encode::Encoding subclass that detects the encoding of data
url: https://metacpan.org/release/Encode-Detect
rpm_license: MPLv1.1 or GPLv2+ or LGPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Encode-Detect-1.01-28.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Encode-Detect-1.01-28.el8.x86_64.rpm
checksum_type: sha256
description:
  This Perl module is an Encode::Encoding subclass that uses
  Encode::Detect::Detector to determine the charset of the input data and then
  decodes it using the encoder of the detected charset.


pkgId: ac4109d88c412b39c91cd83796db2ecec524e40bfa05ba726e1f05419382a6c9
name: perl-Encode-Locale
arch: noarch
version: 1.05
epoch: 0
release: 10.module+el8.3.0+6498+31ea7642
summary: Determine the locale encoding
url: http://search.cpan.org/dist/Encode-Locale/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: perl-Encode-Locale-1.05-10.module+el8.3.0+6498+31ea7642.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Encode-Locale-1.05-10.module+el8.3.0+6498+31ea7642.noarch.rpm
checksum_type: sha256
description:
  In many applications it's wise to let Perl use Unicode for the strings
  it processes.  Most of the interfaces Perl has to the outside world is
  still byte based.  Programs therefore needs to decode byte strings
  that enter the program from the outside and encode them again on the
  way out.


pkgId: f6f3c34bcbc38a5cb667cdc8ae19e1a773bb79d8c09782adbb81db7f9a30ad89
name: perl-Encode-devel
arch: x86_64
version: 2.88
epoch: 4
release: 7.module+el8.1.0+2926+ce7246ad
summary: Perl Encode Module Generator
url: http://search.cpan.org/dist/Encode/
rpm_license: (GPL+ or Artistic) and UCD
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Encode-2.88-7.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Encode-devel-2.88-7.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  enc2xs builds a Perl extension for use by Encode from either Unicode Character
  Mapping files (.ucm) or Tcl Encoding Files (.enc). You can use enc2xs to add
  your own encoding to perl. No knowledge of XS is necessary.


pkgId: 3816ff040181b42cd0b1ea77aa51d83a1c28074b3399be0178ad30429c4508c4
name: perl-Env
arch: noarch
version: 1.04
epoch: 0
release: 395.el8
summary: Perl module that imports environment variables as scalars or arrays
url: http://search.cpan.org/dist/Env/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Env-1.04-395.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Env-1.04-395.el8.noarch.rpm
checksum_type: sha256
description:
  Perl maintains environment variables in a special hash named %ENV. For when
  this access method is inconvenient, the Perl module Env allows environment
  variables to be treated as scalar or array variables.


pkgId: 2a39c4f94e97e9e1b157959309b94ec169863b31f8048c32dc9eb508b9ca04be
name: perl-Errno
arch: x86_64
version: 1.25
epoch: 0
release: 404.module+el8.1.0+2926+ce7246ad
summary: System errno constants
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Errno-1.25-404.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  "Errno" defines and conditionally exports all the error constants defined in
  your system "errno.h" include file. It has a single export tag, ":POSIX",
  which will export all POSIX defined error numbers.


pkgId: da123ac70cf54019424df80f4fd3d5c06ec4ce534fa335cf1277479bec174935
name: perl-Error
arch: noarch
version: 0.17025
epoch: 1
release: 2.el8
summary: Error/exception handling in an OO-ish way
url: http://search.cpan.org/dist/Error/
rpm_license: (GPL+ or Artistic) and MIT
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Error-0.17025-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Error-0.17025-2.el8.noarch.rpm
checksum_type: sha256
description:
  The Error package provides two interfaces. Firstly Error provides a
  procedural interface to exception handling. Secondly Error is a base class
  for errors/exceptions that can either be thrown, for subsequent catch, or
  can simply be recorded.


pkgId: ad9ed20d6671e689d4ace22a62200f49230ff41a10a67d596fdaea6cab74f66b
name: perl-Exporter
arch: noarch
version: 5.72
epoch: 0
release: 1001.module+el8.1.0+2926+ce7246ad
summary: Implements default import method for modules
url: http://search.cpan.org/dist/Exporter/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Exporter-5.72-1001.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Exporter-5.72-1001.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  The Exporter module implements an import method which allows a module to
  export functions and variables to its users' name spaces. Many modules use
  Exporter rather than implementing their own import method because Exporter
  provides a highly flexible interface, with an implementation optimized for
  the common case.


pkgId: b4c048000e601f8001b889b944364b9dc09a90eb26e56c26590cfbcffe874e3b
name: perl-ExtUtils-CBuilder
arch: noarch
version: 0.280225
epoch: 1
release: 367.module+el8.1.0+2926+ce7246ad
summary: Compile and link C code for Perl modules
url: http://search.cpan.org/dist/ExtUtils-CBuilder/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-ExtUtils-CBuilder-0.280225-367.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-ExtUtils-CBuilder-0.280225-367.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This module can build the C portions of Perl modules by invoking the
  appropriate compilers and linkers in a cross-platform manner. It was motivated
  by the Module::Build project, but may be useful for other purposes as well.


pkgId: 75b43ebfc25b64600d06daf5ac9d888d20da26d90df2d02a808e93454e920707
name: perl-ExtUtils-Command
arch: noarch
version: 7.24
epoch: 0
release: 4.module+el8.1.0+2926+ce7246ad
summary: Perl routines to replace common UNIX commands in Makefiles
url: http://search.cpan.org/dist/ExtUtils-MakeMaker/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-ExtUtils-MakeMaker-7.24-4.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-ExtUtils-Command-7.24-4.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This Perl module is used to replace common UNIX commands. In all cases the
  functions work with @ARGV rather than taking arguments. This makes them
  easier to deal with in Makefiles.


pkgId: b74293e2d2d00cec4472b9b11ea0ea8f9390367d0ab09a9d101c4b120d5015ac
name: perl-ExtUtils-Constant
arch: noarch
version: 0.25
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Generate XS code to import C header constants
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-ExtUtils-Constant-0.25-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  ExtUtils::Constant facilitates generating C and XS wrapper code to allow
  Perl modules to AUTOLOAD constants defined in C library header files.


pkgId: 3a7503207c68179631c5e3768feb05f7eb75fe558636dd24be8843625c8baec8
name: perl-ExtUtils-MM-Utils
arch: noarch
version: 7.24
epoch: 0
release: 4.module+el8.1.0+2926+ce7246ad
summary: ExtUtils::MM methods without dependency on ExtUtils::MakeMaker
url: http://search.cpan.org/dist/ExtUtils-MakeMaker/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-ExtUtils-MakeMaker-7.24-4.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-ExtUtils-MM-Utils-7.24-4.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This is a collection of ExtUtils::MM subroutines that are used by many
  other modules but that do not need full-featured ExtUtils::MakeMaker. The
  issue with ExtUtils::MakeMaker is it pulls in Perl header files and that
  is an overkill for small subroutines.


pkgId: 54e04c22f0a861cb9217d823e76fc35acb9ed38e1b59c25339237e669b727e19
name: perl-ExtUtils-MakeMaker
arch: noarch
version: 7.24
epoch: 0
release: 4.module+el8.1.0+2926+ce7246ad
summary: Create a module Makefile
url: http://search.cpan.org/dist/ExtUtils-MakeMaker/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-ExtUtils-MakeMaker-7.24-4.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-ExtUtils-MakeMaker-7.24-4.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This utility is designed to write a Makefile for an extension module from a
  Makefile.PL. It is based on the Makefile.SH model provided by Andy
  Dougherty and the perl5-porters.


pkgId: d627a88a1cf04700ada33524937199869510758b39393c20fb24ae63c86befe5
name: perl-ExtUtils-Miniperl
arch: noarch
version: 1.05
epoch: 0
release: 404.module+el8.1.0+2926+ce7246ad
summary: Write the C code for perlmain.c
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-ExtUtils-Miniperl-1.05-404.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  writemain() takes an argument list of directories containing archive libraries
  that relate to perl modules and should be linked into a new perl binary. It
  writes a corresponding perlmain.c file that is a plain C file containing all
  the bootstrap code to make the If the first argument to writemain() is a
  reference to a scalar it is used as the filename to open for ouput. Any other
  reference is used as the filehandle to write to. Otherwise output defaults to
  STDOUT.


pkgId: 72f7879353ca26f95cf71c82c82c419a847d2d2239d15e9e4a32750689241ebc
name: perl-ExtUtils-Miniperl
arch: noarch
version: 1.06
epoch: 0
release: 419.el8
summary: Write the C code for perlmain.c
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: baseos.ab
rpm_sourcerpm: perl-5.26.3-419.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-ExtUtils-Miniperl-1.06-419.el8.noarch.rpm
checksum_type: sha256
description:
  writemain() takes an argument list of directories containing archive libraries
  that relate to perl modules and should be linked into a new perl binary. It
  writes a corresponding perlmain.c file that is a plain C file containing all
  the bootstrap code to make the If the first argument to writemain() is a
  reference to a scalar it is used as the file name to open for output. Any other
  reference is used as the file handle to write to. Otherwise output defaults to
  STDOUT.


pkgId: 94e9419bf47815cd6a74ff5bdb34b62a3e065c25a5b604731137e0cc6b6f87ee
name: perl-ExtUtils-ParseXS
arch: noarch
version: 3.31
epoch: 1
release: 369.module+el8.1.0+2926+ce7246ad
summary: Module and a script for converting Perl XS code into C code
url: http://search.cpan.org/dist/ExtUtils-ParseXS/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-ExtUtils-ParseXS-3.31-369.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-ExtUtils-ParseXS-3.31-369.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  ExtUtils::ParseXS will compile XS code into C code by embedding the
  constructs necessary to let C functions manipulate Perl values and creates
  the glue necessary to let Perl access those functions.


pkgId: e70c8758ef40cf822d29f266d1f85ddefe582a9537b80acb085d0d8ea1559357
name: perl-Fedora-VSP
arch: noarch
version: 0.001
epoch: 0
release: 10.module+el8.1.0+2926+ce7246ad
summary: Perl version normalization for RPM
url: https://ppisar.fedorapeople.org/Fedora-VSP/
rpm_license: GPLv3+
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Fedora-VSP-0.001-10.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Fedora-VSP-0.001-10.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This module provides functions for normalizing Perl version strings for
  Red Hat Package (RPM) based Linux distributions.


pkgId: 4e88417a686d61a45629c7d331367a020398f22e0805a6840c9a5ea8101b65e1
name: perl-File-CheckTree
arch: noarch
version: 4.42
epoch: 0
release: 303.el8
summary: Run many file-test checks on a tree
url: https://metacpan.org/release/File-CheckTree
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-File-CheckTree-4.42-303.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-File-CheckTree-4.42-303.el8.noarch.rpm
checksum_type: sha256
description:
  File::CheckTree::validate() routine takes a single multi-line string
  consisting of directives, each containing a file name plus a file test to try
  on it. (The file test may also be a "cd", causing subsequent relative file
  names to be interpreted relative to that directory.) After the file test you
  may put || die to make it a fatal error if the file test fails. The default is
  || warn.  The file test may optionally have a "!' prepended to test for the
  opposite condition. If you do a cd and then list some relative file names, you
  may want to indent them slightly for readability. If you supply your own die()
  or warn() message, you can use $file to interpolate the file name.


pkgId: 7400e2682921a6a93fff1df3dc3dae96e7932500572d2097559f96fb30649f78
name: perl-File-Compare
arch: noarch
version: 1.100.600
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Compare files or file handles
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-File-Compare-1.100.600-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  A File::Compare Perl module provides functions for comparing a content of two
  files specified by a file name or a file handle.


pkgId: dea09905bc6905605bff132702dc4e16e9ce23752927128a25eb00a38f793932
name: perl-File-Copy
arch: noarch
version: 2.34
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Copy files or file handles
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-File-Copy-2.34-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  A File::Copy module provides two basic functions, copy and move, which are
  useful for getting the contents of a file from one place to another.


pkgId: 0926eab1ed8bf59755ea11ecee05e97f6c18969cac9a8acb309cdf17fedf27c4
name: perl-File-DosGlob
arch: x86_64
version: 1.12
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: DOS-like globbing
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-File-DosGlob-1.12-471.module+el8.6.0+13324+628a2397.x86_64.rpm
checksum_type: sha256
description:
  This Perl module implements DOS-like globbing with a few enhancements. It
  is largely compatible with perlglob.exe in all but one respect--it understands
  wild cards in directory components.


pkgId: a0bfc1b77ae07c703dd5720ec5ff764133abd71dbe3b150c801c82613a9e4ac8
name: perl-File-Fetch
arch: noarch
version: 0.56
epoch: 0
release: 2.el8
summary: Generic file fetching mechanism
url: http://search.cpan.org/dist/File-Fetch/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-File-Fetch-0.56-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-File-Fetch-0.56-2.el8.noarch.rpm
checksum_type: sha256
description:
  File::Fetch allows you to fetch any file pointed to by a "ftp", "http",
  "file", "git", or "rsync" URI by a number of different means.


pkgId: 6fa9ba5706949dc231d176ea342014f2be49150b49a8648f6bf60e90b4f3e15e
name: perl-File-Find
arch: noarch
version: 1.37
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Traverse a directory tree
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-File-Find-1.37-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  These are functions for searching through directory trees doing work on each
  file found similar to the Unix find command.


pkgId: 57d908fc9387d307fced975df77d04edf61d4f4686f949bdc6e460e2a62adb11
name: perl-File-HomeDir
arch: noarch
version: 1.00
epoch: 0
release: 14.module+el8.1.0+2926+ce7246ad
summary: Find your home and other directories on any platform
url: http://search.cpan.org/dist/File-HomeDir/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-File-HomeDir-1.00-14.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-File-HomeDir-1.00-14.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  File::HomeDir is a module for locating the directories that are "owned"
  by a user (typically your user) and to solve the various issues that
  arise trying to find them consistently across a wide variety of
  platforms.


pkgId: 8a08f0b2edc4ecaabdfe1ee329de9a6c9de37de0df4e4f9bdb8938df7938c4a3
name: perl-File-Listing
arch: noarch
version: 6.04
epoch: 0
release: 17.el8
summary: Parse directory listing
url: http://search.cpan.org/dist/File-Listing/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: i686.ab.2
rpm_sourcerpm: perl-File-Listing-6.04-17.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-File-Listing-6.04-17.el8.noarch.rpm
checksum_type: sha256
description:
  This module exports a single function called parse_dir(), which can be used
  to parse directory listings.


pkgId: dcc14ff9253be9011109a6f2878cc76ca387dc56847fe19cd96b417638dfb077
name: perl-File-Path
arch: noarch
version: 2.12
epoch: 0
release: 368.module+el8.1.0+2926+ce7246ad
summary: Create or remove directory trees
url: http://search.cpan.org/dist/File-Path/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-File-Path-2.12-368.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-File-Path-2.12-368.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This module provides a convenient way to create directories of arbitrary
  depth and to delete an entire directory subtree from the file system.


pkgId: 6c085e2b8319436478936224979c6a441150f73f16b091e5897245467ef6af74
name: perl-File-ShareDir
arch: noarch
version: 1.104
epoch: 0
release: 3.el8
summary: Locate per-dist and per-module shared files
url: http://search.cpan.org/dist/File-ShareDir/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-File-ShareDir-1.104-3.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-File-ShareDir-1.104-3.el8.noarch.rpm
checksum_type: sha256
description:
  The intent of File::ShareDir is to provide a companion to Class::Inspector
  and File::HomeDir, modules that take a process that is well-known by
  advanced Perl developers but gets a little tricky, and make it more
  available to the larger Perl community.


pkgId: e56655c2ec63d3ccc59f18e1175969aa5f14ed1298054d663c930e424bb2364e
name: perl-File-Slurp
arch: noarch
version: 9999.19
epoch: 0
release: 19.el8
summary: Efficient Reading/Writing of Complete Files
url: http://search.cpan.org/dist/File-Slurp/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-File-Slurp-9999.19-19.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-File-Slurp-9999.19-19.el8.noarch.rpm
checksum_type: sha256
description:
  This module provides subs that allow you to read or write entire files with
  one simple call. They are designed to be simple to use, have flexible ways
  to pass in or get the file contents and to be very efficient. There is also
  a sub to read in all the files in a directory other than . and ..

  These slurp/spew subs work for files, pipes and sockets, and stdio,
  pseudo-files, and DATA.


pkgId: 11814ac01640b1475f820bf7cd14d664347cc9211f66bafde2d4169477629d4c
name: perl-File-Temp
arch: noarch
version: 0.230.600
epoch: 0
release: 2.module+el8.1.0+2926+ce7246ad
summary: Return name and handle of a temporary file safely
url: https://metacpan.org/release/File-Temp
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-File-Temp-0.230.600-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-File-Temp-0.230.600-2.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  File::Temp can be used to create and open temporary files in a safe way.
  There is both a function interface and an object-oriented interface. The
  File::Temp constructor or the tempfile() function can be used to return the
  name and the open file handle of a temporary file. The tempdir() function
  can be used to create a temporary directory.


pkgId: 6af826cfd64fa0bf843744f46ad05bd0ff53a1b9d84e30aca752bb0006cde5e4
name: perl-File-Which
arch: noarch
version: 1.21
epoch: 0
release: 4.module+el8.1.0+2926+ce7246ad
summary: Portable implementation of the 'which' utility
url: http://search.cpan.org/dist/File-Which/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-File-Which-1.21-4.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-File-Which-1.21-4.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  File::Which is a portable implementation (in Perl) of 'which', and can
  be used to get the absolute filename of an executable program
  installed somewhere in your PATH, or just check for its existence.


pkgId: d77bd479f3d4fda4d8e4c87976e8ee2dd3c0fdfff8476a8bc793cf5a0aec916c
name: perl-File-pushd
arch: noarch
version: 1.014
epoch: 0
release: 6.module+el8.1.0+2942+110089f5
summary: Change directory temporarily for a limited scope
url: http://search.cpan.org/dist/File-pushd/
rpm_license: ASL 2.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: perl-File-pushd-1.014-6.module+el8.1.0+2942+110089f5.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-File-pushd-1.014-6.module+el8.1.0+2942+110089f5.noarch.rpm
checksum_type: sha256
description:
  File::pushd does a temporary chdir that is easily and automatically reverted,
  similar to pushd in some Unix command shells. It works by creating an object
  that caches the original working directory. When the object is destroyed, the
  destructor calls chdir to revert to the original working directory. By storing
  the object in a lexical variable with a limited scope, this happens
  automatically at the end of the scope.


pkgId: 6a906ca6005383deabe79c444e85ca03cbb29700252008a1741e50e643c4b823
name: perl-File-stat
arch: noarch
version: 1.09
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: By-name interface to Perl built-in stat functions
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-File-stat-1.09-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This module overrides the core stat() and lstat() functions, replacing them
  with versions that return File::stat objects. This object has methods that
  return the similarly named structure field name from the stat(2) function.


pkgId: 58ce94aa8f1778875c81a2dcc6bd45af984d4cc563d49070dc690e8ec3c3d58c
name: perl-FileCache
arch: noarch
version: 1.10
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Keep more files open than the system permits
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-FileCache-1.10-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  The "cacheout" function will make sure that there's a file handle open
  for reading or writing available as the path name you give it. It
  automatically closes and re-opens files if you exceed your system
  maximum number of file descriptors, or the suggested maximum.


pkgId: 99f65574cb71d163a35d87b430dc3ba21db40c70ba23c6350d2c2e51e2d28527
name: perl-FileHandle
arch: noarch
version: 2.03
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Object methods for file handles
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-FileHandle-2.03-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This is an object-oriented interface for opening files and performing
  input/output operations on them.


pkgId: 3f62de109bc4ceef613dc750ee7e51227eebebe873827843161fb4eb674aa060
name: perl-Filter
arch: x86_64
version: 1.58
epoch: 2
release: 2.el8
summary: Perl source filters
url: http://search.cpan.org/dist/Filter/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Filter-1.58-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Filter-1.58-2.el8.x86_64.rpm
checksum_type: sha256
description:
  Source filters alter the program text of a module before Perl sees it, much as
  a C preprocessor alters the source text of a C program before the compiler
  sees it.


pkgId: 55e974bbe2671ac0d490630a6abdc15b8d51f9cde74ad6f7b8f9b8ce1bb1ee12
name: perl-Filter-Simple
arch: noarch
version: 0.92
epoch: 0
release: 367.module+el8.1.0+2926+ce7246ad
summary: Simplified Perl source filtering
url: http://search.cpan.org/dist/Filter-Simple/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Filter-Simple-0.92-367.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Filter-Simple-0.92-367.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  The Filter::Simple Perl module provides a simplified interface to
  Filter::Util::Call; one that is sufficient for most common cases.


pkgId: 31e6d21e7515db413766881e567ce14d926470b9ff745e3ef2d196f5b7c67bb4
name: perl-FindBin
arch: noarch
version: 1.51
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Locate a directory of an original Perl script
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-FindBin-1.51-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  Locates the full path to the script bin directory to allow the use of paths
  relative to the bin directory.


pkgId: 4b54b2da9e28145fb945dbcab6493cb6b16bc8557aa4981e83e1c434f7f2bea8
name: perl-GDBM_File
arch: x86_64
version: 1.18
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Perl5 access to the gdbm library
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-GDBM_File-1.18-471.module+el8.6.0+13324+628a2397.x86_64.rpm
checksum_type: sha256
description:
  GDBM_File is a module which allows Perl programs to make use of the facilities
  provided by the GNU gdbm library.


pkgId: 4a74865954b01680e43511cec1557bc90f26716f7781b192a67f32ef4c1ad418
name: perl-GSSAPI
arch: x86_64
version: 0.28
epoch: 0
release: 23.el8
summary: Perl extension providing access to the GSSAPIv2 library
url: http://search.cpan.org/dist/GSSAPI/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-GSSAPI-0.28-23.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-GSSAPI-0.28-23.el8.x86_64.rpm
checksum_type: sha256
description:
  This module gives access to the routines of the GSSAPI library, as
  described in rfc2743 and rfc2744 and implemented by the Kerberos-1.2
  distribution from MIT.


pkgId: fe181e9d22c1125d129d75e903412ebafc0274431f8ea43f8006ba0c1540c4a5
name: perl-Getopt-Long
arch: noarch
version: 2.49.1
epoch: 0
release: 3.module+el8.1.0+2926+ce7246ad
summary: Extended processing of command line options
url: http://search.cpan.org/dist/Getopt-Long/
rpm_license: GPLv2+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Getopt-Long-2.49.1-3.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Getopt-Long-2.49.1-3.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  The Getopt::Long module implements an extended getopt function called
  GetOptions(). It parses the command line from @ARGV, recognizing and removing
  specified options and their possible values.  It adheres to the POSIX syntax
  for command line options, with GNU extensions. In general, this means that
  options have long names instead of single letters, and are introduced with
  a double dash "--". Support for bundling of command line options, as was the
  case with the more traditional single-letter approach, is provided but not
  enabled by default.


pkgId: 2af3a6579f5bce2206fbd48fc53de610d106eb6fa9a99cd4e6ade904cad00183
name: perl-Getopt-Std
arch: noarch
version: 1.12
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Process single-character switches with switch clustering
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Getopt-Std-1.12-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  The Getopt::Std module provides functions for processing single-character
  switches with switch clustering. Pass one argument which is a string
  containing all switches to be recognized.


pkgId: a854f234a74c7596d15c80e32504999ec177489f9c4588e8b088cb856087eee0
name: perl-HTML-Parser
arch: x86_64
version: 3.72
epoch: 0
release: 15.module+el8.3.0+6498+31ea7642
summary: Perl module for parsing HTML
url: https://metacpan.org/release/HTML-Parser
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: perl-HTML-Parser-3.72-15.module+el8.3.0+6498+31ea7642.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-HTML-Parser-3.72-15.module+el8.3.0+6498+31ea7642.x86_64.rpm
checksum_type: sha256
description:
  The HTML-Parser module for perl to parse and extract information from
  HTML documents, including the HTML::Entities, HTML::HeadParser,
  HTML::LinkExtor, HTML::PullParser, and HTML::TokeParser modules.


pkgId: ab55aedb523dee4469134f6972ffc36abbc4a72721f6b1dc25efc0cedf3e7b27
name: perl-HTML-Tagset
arch: noarch
version: 3.20
epoch: 0
release: 33.el8
summary: HTML::Tagset - data tables useful in parsing HTML
url: http://search.cpan.org/dist/HTML-Tagset/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-HTML-Tagset-3.20-33.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-HTML-Tagset-3.20-33.el8.noarch.rpm
checksum_type: sha256
description:
  This module contains several data tables useful in various kinds of
  HTML parsing operations, such as tag and entity names.


pkgId: a3e29de849b6fab962dacf458ae963691e08132e9abdf40458a32f2e3c32c673
name: perl-HTTP-Cookies
arch: noarch
version: 6.04
epoch: 0
release: 2.el8
summary: HTTP cookie jars
url: http://search.cpan.org/dist/HTTP-Cookies/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: i686.ab.2
rpm_sourcerpm: perl-HTTP-Cookies-6.04-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-HTTP-Cookies-6.04-2.el8.noarch.rpm
checksum_type: sha256
description:
  This class is for objects that represent a "cookie jar" -- that is, a
  database of all the HTTP cookies that a given LWP::UserAgent object
  knows about.


pkgId: 54dc2a099c495d11ac7ccae8b37beb8b39607fe5b477c5b82c3d66f2d9730331
name: perl-HTTP-Date
arch: noarch
version: 6.02
epoch: 0
release: 18.el8
summary: Date conversion routines
url: http://search.cpan.org/dist/HTTP-Date/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-HTTP-Date-6.02-18.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-HTTP-Date-6.02-18.el8.noarch.rpm
checksum_type: sha256
description:
  This module provides functions that deal the date formats used by the HTTP
  protocol (and then some more). Only the first two functions, time2str() and
  str2time(), are exported by default.


pkgId: be7ebc2a99421f0f27e8eed14ab699a4c4d3cb58b67541ce93291b35757cd6f7
name: perl-HTTP-Message
arch: noarch
version: 6.18
epoch: 0
release: 1.el8
summary: HTTP style message
url: https://metacpan.org/release/HTTP-Message
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: i686.ab.2
rpm_sourcerpm: perl-HTTP-Message-6.18-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-HTTP-Message-6.18-1.el8.noarch.rpm
checksum_type: sha256
description:
  The HTTP-Message distribution contains classes useful for representing the
  messages passed in HTTP style communication.  These are classes representing
  requests, responses and the headers contained within them.


pkgId: eafb96e3af61fcc5fad88752bccce2f9e47d64bb5b9657d344b63859f3d9259a
name: perl-HTTP-Negotiate
arch: noarch
version: 6.01
epoch: 0
release: 19.el8
summary: Choose a variant to serve
url: http://search.cpan.org/dist/HTTP-Negotiate/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: i686.ab.2
rpm_sourcerpm: perl-HTTP-Negotiate-6.01-19.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-HTTP-Negotiate-6.01-19.el8.noarch.rpm
checksum_type: sha256
description:
  This module provides a complete implementation of the HTTP content
  negotiation algorithm specified in draft-ietf-http-v11-spec-00.ps chapter
  12. Content negotiation allows for the selection of a preferred content
  representation based upon attributes of the negotiable variants and the
  value of the various Accept* header fields in the request.


pkgId: f55553c140249a1676d835832c8e17a96f6245ae5ab4d001c28fdaa9bc71daf4
name: perl-HTTP-Tiny
arch: noarch
version: 0.074
epoch: 0
release: 2.module+el8.1.0+2926+ce7246ad
summary: Small, simple, correct HTTP/1.1 client
url: https://metacpan.org/release/HTTP-Tiny
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-HTTP-Tiny-0.074-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-HTTP-Tiny-0.074-2.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This is a very simple HTTP/1.1 client, designed for doing simple GET requests
  without the overhead of a large framework like LWP::UserAgent.

  It is more correct and more complete than HTTP::Lite. It supports proxies
  (currently only non-authenticating ones) and redirection. It also correctly
  resumes after EINTR.


pkgId: 880be628d77018d0826baf1bd1ef114b9572f8751cf90391dfe28c6f23a606e4
name: perl-Hash-Util-FieldHash
arch: x86_64
version: 1.20
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Support for inside-out classes
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Hash-Util-FieldHash-1.20-471.module+el8.6.0+13324+628a2397.x86_64.rpm
checksum_type: sha256
description:
  Hash::Util::FieldHash offers a number of functions in support of the
  inside-out technique of class construction.


pkgId: 80a022e71118d7ed9a8efbd0ae3ffee50252121b027951589ef3fcba821b7ddf
name: perl-I18N-Collate
arch: noarch
version: 1.02
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Compare 8-bit scalar data according to the current locale
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-I18N-Collate-1.02-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This module provides you with objects that will collate according to your
  national character set. This module is deprecated. See the perllocale manual
  page for further information.


pkgId: 83ec555cacabf9b57296780663d5016c3e04efc142e5991cb67dff3171a7332e
name: perl-I18N-LangTags
arch: noarch
version: 0.44
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Functions for dealing with RFC 3066 language tags
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-I18N-LangTags-0.44-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  Language tags are a formalism, described in RFC 3066, for declaring what
  language form (language and possibly dialect) a given chunk of information is
  in. This library provides functions for common tasks involving language tags
  as they are needed in a variety of protocols and applications.


pkgId: 254848e74f1c8f89277038313e02f3a41f1a751501d909a591ea0a39de19caee
name: perl-I18N-Langinfo
arch: x86_64
version: 0.19
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Query locale information
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-I18N-Langinfo-0.19-471.module+el8.6.0+13324+628a2397.x86_64.rpm
checksum_type: sha256
description:
  The langinfo() function queries various locale information that can be used to
  localize output and user interfaces. It uses the current underlying locale,
  regardless of whether or not it was called from within the scope of "use
  locale".


pkgId: a8a48f70745c8ae0510d97611a5879f2ceb3f80fe34427a5dc3c157b9e860358
name: perl-IO-Compress
arch: noarch
version: 2.074
epoch: 0
release: 2.module+el8.1.0+2926+ce7246ad
summary: Read and write compressed data
url: http://search.cpan.org/dist/IO-Compress/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-IO-Compress-2.074-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-IO-Compress-2.074-2.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This distribution provides a Perl interface to allow reading and writing of
  compressed data created with the zlib and bzip2 libraries.

  IO-Compress supports reading and writing of bzip2, RFC 1950, RFC 1951,
  RFC 1952 (i.e. gzip) and zip files/buffers.

  The following modules used to be distributed separately, but are now
  included with the IO-Compress distribution:
  * Compress-Zlib
  * IO-Compress-Zlib
  * IO-Compress-Bzip2
  * IO-Compress-Base


pkgId: d7a50b52698c5da0a339cfa3866315f6011cee97b6665494532365d68e293674
name: perl-IO-Compress-Lzma
arch: noarch
version: 2.096
epoch: 0
release: 1.module+el8.6.0+13324+628a2397
summary: Read and write lzma compressed data
url: https://metacpan.org/release/IO-Compress-Lzma
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-IO-Compress-Lzma-2.096-1.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-IO-Compress-Lzma-2.096-1.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This distribution provides a Perl interface to allow reading and writing of
  compressed data created with the lzma library.


pkgId: 08c39e33e577668269decc9b970036b00c80d803fc768d08256a475efaf50e85
name: perl-IO-HTML
arch: noarch
version: 1.001
epoch: 0
release: 10.el8
summary: Open an HTML file with automatic character set detection
url: http://search.cpan.org/dist/IO-HTML/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-IO-HTML-1.001-10.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-IO-HTML-1.001-10.el8.noarch.rpm
checksum_type: sha256
description:
  IO::HTML provides an easy way to open a file containing HTML while
  automatically determining its encoding. It uses the HTML5 encoding sniffing
  algorithm specified in section 8.2.2.1 of the draft standard.


pkgId: 14cabb4fa6ff0805f25be80d78c0eadec8f937cb090e71e8f0ee05c0b7b6079b
name: perl-IO-Multiplex
arch: noarch
version: 1.16
epoch: 0
release: 9.el8
summary: Manage IO on many file handles
url: http://search.cpan.org/dist/IO-Multiplex/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-IO-Multiplex-1.16-9.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-IO-Multiplex-1.16-9.el8.noarch.rpm
checksum_type: sha256
description:
  IO::Multiplex is designed to take the effort out of managing multiple file
  handles. It is essentially a really fancy front end to the select system call.
  In addition to maintaining the select loop, it buffers all input and output
  to/from the file handles. It can also accept incoming connections on one or
  more listen sockets.


pkgId: d4a5ea43991d7fed6b5002cbacf62958a887e0fceb4dc3b2d8b728c94c6fb061
name: perl-IO-Socket-IP
arch: noarch
version: 0.39
epoch: 0
release: 5.el8
summary: Drop-in replacement for IO::Socket::INET supporting both IPv4 and IPv6
url: http://search.cpan.org/dist/IO-Socket-IP/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-IO-Socket-IP-0.39-5.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-IO-Socket-IP-0.39-5.el8.noarch.rpm
checksum_type: sha256
description:
  This module provides a protocol-independent way to use IPv4 and IPv6
  sockets, as a drop-in replacement for IO::Socket::INET. Most constructor
  arguments and methods are provided in a backward-compatible way.


pkgId: 67d2850c24239ed68f7381429611e321c7945ac3cc7c5f4322f6fc9623119bdf
name: perl-IO-Socket-IP
arch: noarch
version: 0.41
epoch: 0
release: 2.module+el8.6.0+13324+628a2397
summary: Drop-in replacement for IO::Socket::INET supporting both IPv4 and IPv6
url: https://metacpan.org/release/IO-Socket-IP
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-IO-Socket-IP-0.41-2.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-IO-Socket-IP-0.41-2.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This module provides a protocol-independent way to use IPv4 and IPv6
  sockets, intended as a replacement for IO::Socket::INET. Most constructor
  arguments and methods are provided in a backward-compatible way.


pkgId: 7ef0aaa548b647daa5bb11bef05a31ee7687a2edc88d93d8ed76e7eb8b36fcad
name: perl-IO-Socket-SSL
arch: noarch
version: 2.066
epoch: 0
release: 4.module+el8.3.0+6446+37a50855
summary: Perl library for transparent SSL
url: https://metacpan.org/release/IO-Socket-SSL
rpm_license: (GPL+ or Artistic) and MPLv2.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-IO-Socket-SSL-2.066-4.module+el8.3.0+6446+37a50855.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-IO-Socket-SSL-2.066-4.module+el8.3.0+6446+37a50855.noarch.rpm
checksum_type: sha256
description:
  This module is a true drop-in replacement for IO::Socket::INET that
  uses SSL to encrypt data before it is transferred to a remote server
  or client. IO::Socket::SSL supports all the extra features that one
  needs to write a full-featured SSL client or server application:
  multiple SSL contexts, cipher selection, certificate verification, and
  SSL version selection. As an extra bonus, it works perfectly with
  mod_perl.


pkgId: 0aaef0cf7134dd269438707ab5b245cdd59383c8085f254c65d14c49f8de9089
name: perl-IO-String
arch: noarch
version: 1.08
epoch: 0
release: 32.el8
summary: Emulate file interface for in-core strings
url: http://search.cpan.org/dist/IO-String/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-IO-String-1.08-32.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-IO-String-1.08-32.el8.noarch.rpm
checksum_type: sha256
description:
  The "IO::String" module provides the "IO::File" interface for in-core
  strings.  An "IO::String" object can be attached to a string, and
  makes it possible to use the normal file operations for reading or
  writing data, as well as for seeking to various locations of the
  string.  This is useful when you want to use a library module that
  only provides an interface to file handles on data that you have in a
  string variable.

  Note that perl-5.8 and better has built-in support for "in memory"
  files, which are set up by passing a reference instead of a filename
  to the open() call. The reason for using this module is that it makes
  the code backwards compatible with older versions of Perl.


pkgId: 6c60932f84d55e3b2ea8102277ab4244a815362a1c220c788db30f8ee13dd2ad
name: perl-IO-Zlib
arch: noarch
version: 1.10
epoch: 1
release: 404.module+el8.1.0+2926+ce7246ad
summary: Perl IO:: style interface to Compress::Zlib
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-IO-Zlib-1.10-404.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This modules provides an IO:: style interface to the Compress::Zlib package.
  The main advantage is that you can use an IO::Zlib object in much the same way
  as an IO::File object so you can have common code that doesn't know which sort
  of file it is using.


pkgId: 63f14746c2a596f2fa04fc78dfb6da011481b85c64e7f5aed4279e47ba625b00
name: perl-IO-Zlib
arch: noarch
version: 1.10
epoch: 1
release: 471.module+el8.6.0+13324+628a2397
summary: Perl IO:: style interface to Compress::Zlib
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-IO-Zlib-1.10-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  IO::Zlib provides an IO:: style interface to Compress::Zlib and hence to
  gzip/zlib-compressed files. It provides many of the same methods as the
  IO::Handle interface.


pkgId: 5ad555aed2933b1e589117a74ac4639386bf569121ed3e86466dfe1a161dccd4
name: perl-IPC-Cmd
arch: noarch
version: 0.98
epoch: 1
release: 2.module+el8.1.0+2926+ce7246ad
summary: Finding and running system commands made easy
url: http://search.cpan.org/dist/IPC-Cmd/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-IPC-Cmd-0.98-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-IPC-Cmd-0.98-2.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  IPC::Cmd allows you to run commands platform independently, interactively
  if desired, but have them still work.


pkgId: bdbb84691e434b978b88a5ce7c3f9315389c1d9f60aff55676fadb574d5de996
name: perl-IPC-Open3
arch: noarch
version: 1.21
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Open a process for reading, writing, and error handling
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-IPC-Open3-1.21-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  These are functions that spawn a given command and connects the standard
  output of the command for reading, standard output for writing, and standard
  error output for handling the errors.


pkgId: 9bedd680166823eb463415f5496b921c4d4837233be76674ba5007a188038950
name: perl-IPC-System-Simple
arch: noarch
version: 1.25
epoch: 0
release: 17.el8
summary: Run commands simply, with detailed diagnostics
url: http://search.cpan.org/dist/IPC-System-Simple
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-IPC-System-Simple-1.25-17.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-IPC-System-Simple-1.25-17.el8.noarch.rpm
checksum_type: sha256
description:
  Calling Perl's in-built 'system()' function is easy; determining if it
  was successful is _hard_. Let's face it, '$?' isn't the nicest variable
  in the world to play with, and even if you _do_ check it, producing a
  well-formatted error string takes a lot of work. 'IPC::System::Simple'
  takes the hard work out of calling external commands. In fact, if you
  want to be really lazy, you can just write:

      use IPC::System::Simple qw(system);

  and all of your "system" commands will either succeed (run to completion and
  return a zero exit value), or die with rich diagnostic messages.


pkgId: 6e8dba7b1061cf44dfeeeb40aeb760e5e4838e74a0b831c17a565302d676885b
name: perl-Importer
arch: noarch
version: 0.025
epoch: 0
release: 6.module+el8.3.0+6718+7f269185
summary: Alternative interface to modules that export symbols
url: https://metacpan.org/release/Importer
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: perl-Importer-0.025-6.module+el8.3.0+6718+7f269185.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Importer-0.025-6.module+el8.3.0+6718+7f269185.noarch.rpm
checksum_type: sha256
description:
  This Perl module acts as a layer between Exporter and modules which consume
  exports. It is feature-compatible with Exporter, plus some much needed
  extras. You can use this to import symbols from any exporter that follows
  Exporters specification. The exporter modules themselves do not need to use
  or inherit from the Exporter module, they just need to set @EXPORT and/or
  other variables.


pkgId: e4c7d89ccad918ed647686c8e182177c22362128684ccca6daa0df96d943851e
name: perl-JSON
arch: noarch
version: 2.97.001
epoch: 0
release: 2.el8
summary: Parse and convert to JSON (JavaScript Object Notation)
url: http://search.cpan.org/dist/JSON/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-JSON-2.97.001-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-JSON-2.97.001-2.el8.noarch.rpm
checksum_type: sha256
description:
  This module converts between JSON (JavaScript Object Notation) and Perl
  data structure into each other. For JSON, see http://www.crockford.com/JSON/.


pkgId: 84f22b20db4f9fc2b33d9bc13a6a8c1695369ef9b2809ff8e34b1c38ca6d9930
name: perl-JSON-PP
arch: noarch
version: 2.94000
epoch: 0
release: 2.module+el8.1.0+2926+ce7246ad
summary: JSON::XS compatible pure-Perl module
url: http://search.cpan.org/dist/JSON-PP/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-JSON-PP-2.94000-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-JSON-PP-2.94000-2.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  JSON::XS is the fastest and most proper JSON module on CPAN. It is written by
  Marc Lehmann in C, so must be compiled and installed in the used environment.

  JSON::PP is a pure-Perl module and is compatible with JSON::XS.


pkgId: 4a582926e75de7482709dfd6e26fba1fdf7dc01d741d83b01885d921d5812448
name: perl-LDAP
arch: noarch
version: 0.66
epoch: 1
release: 7.el8
summary: LDAP Perl module
url: https://metacpan.org/release/perl-ldap
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-LDAP-0.66-7.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-LDAP-0.66-7.el8.noarch.rpm
checksum_type: sha256
description:
  Net::LDAP is a collection of modules that implements an LDAP services API
  for Perl programs. The module may be used to search directories or perform
  maintenance functions such as adding, deleting or modifying entries.


pkgId: 36b913b5af8b209e50bd92998be6369228df8b5319eb276f87acbac4a99b94f8
name: perl-LWP-MediaTypes
arch: noarch
version: 6.02
epoch: 0
release: 14.el8
summary: Guess media type for a file or a URL
url: http://search.cpan.org/dist/LWP-MediaTypes/
rpm_license: (GPL+ or Artistic) and Public Domain
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-LWP-MediaTypes-6.02-14.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-LWP-MediaTypes-6.02-14.el8.noarch.rpm
checksum_type: sha256
description:
  This module provides functions for handling media (also known as MIME)
  types and encodings. The mapping from file extensions to media types is
  defined by the media.types file. If the ~/.media.types file exists it is
  used instead. For backwards compatibility we will also look for
  ~/.mime.types.


pkgId: 883ea128045c49b937d5d523d22a6e97e0cc822d2c9772897390078a40a1b87a
name: perl-LWP-Protocol-https
arch: noarch
version: 6.07
epoch: 0
release: 4.el8
summary: Provide HTTPS support for LWP::UserAgent
url: http://search.cpan.org/dist/LWP-Protocol-https/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: i686.ab.2
rpm_sourcerpm: perl-LWP-Protocol-https-6.07-4.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-LWP-Protocol-https-6.07-4.el8.noarch.rpm
checksum_type: sha256
description:
  The LWP::Protocol::https module provides support for using HTTPS schemed
  URLs with LWP. This module is a plug-in to the LWP protocol handling, so
  you don't use it directly. Once the module is installed LWP is able to
  access sites using HTTP over SSL/TLS.


pkgId: 431a5268140f2a9486ce02e409219a684918dacab06b08185bad655111998818
name: perl-Locale-Codes
arch: noarch
version: 3.42
epoch: 0
release: 3.module+el8.1.0+2926+ce7246ad
summary: Distribution of modules to handle locale codes
url: http://search.cpan.org/dist/Locale-Codes/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Locale-Codes-3.42-3.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Locale-Codes-3.42-3.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  Locale-Codes is a distribution containing a set of modules. The modules
  each deal with different types of codes which identify parts of the locale
  including languages, countries, currency, etc.


pkgId: 9c241b3a492b663e0c86a27a520d1d74bf977c0f507b1cf6e65a275fba4f2ecb
name: perl-Locale-Maketext
arch: noarch
version: 1.28
epoch: 0
release: 396.el8
summary: Framework for localization
url: http://search.cpan.org/dist/Locale-Maketext/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Locale-Maketext-1.28-396.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Locale-Maketext-1.28-396.el8.noarch.rpm
checksum_type: sha256
description:
  It is a common feature of applications (whether run directly, or via the Web)
  for them to be "localized" -- i.e., for them to present an English interface
  to an English-speaker, a German interface to a German-speaker, and so on for
  all languages it's programmed with. Locale::Maketext is a framework for
  software localization; it provides you with the tools for organizing and
  accessing the bits of text and text-processing code that you need for
  producing localized applications.


pkgId: f195629256ceb32b9d06c7d4da76e1c06c41672621eef0bfac0e5f7e30517123
name: perl-Locale-Maketext-Simple
arch: noarch
version: 0.21
epoch: 1
release: 404.module+el8.1.0+2926+ce7246ad
summary: Simple interface to Locale::Maketext::Lexicon
url: http://www.perl.org/
rpm_license: MIT
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Locale-Maketext-Simple-0.21-404.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This module is a simple wrapper around Locale::Maketext::Lexicon, designed
  to alleviate the need of creating Language Classes for module authors.


pkgId: 0fb89452a903418e9567fb309a632edd986f8be286f31ff8002ed540f05def19
name: perl-MIME-Base64
arch: x86_64
version: 3.15
epoch: 0
release: 1001.module+el8.1.0+2926+ce7246ad
summary: Encoding and decoding of Base64 and quoted-printable strings
url: http://search.cpan.org/dist/MIME-Base64/
rpm_license: (GPL+ or Artistic) and MIT
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-MIME-Base64-3.15-1001.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-MIME-Base64-3.15-1001.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  This package contains a Base64 encoder/decoder and a quoted-printable
  encoder/decoder. These encoding methods are specified in RFC 2045 - MIME
  (Multipurpose Internet Mail Extensions).


pkgId: 620557d59dfcc2b3bc4e8ae032fd1fb9a5540d5bad7c7742c2f5c9f184e8d54d
name: perl-MRO-Compat
arch: noarch
version: 0.13
epoch: 0
release: 4.el8
summary: Mro::* interface compatibility for Perls < 5.9.5
url: http://search.cpan.org/dist/MRO-Compat/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-MRO-Compat-0.13-4.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-MRO-Compat-0.13-4.el8.noarch.rpm
checksum_type: sha256
description:
  The "mro" namespace provides several utilities for dealing with method
  resolution order and method caching in general in Perl 5.9.5 and higher.
  This module provides those interfaces for earlier versions of Perl (back
  to 5.6.0 anyways).

  It is a harmless no-op to use this module on 5.9.5+. That is to say,
  code which properly uses MRO::Compat will work unmodified on both older
  Perls and 5.9.5+.

  If you're writing a piece of software that would like to use the parts
  of 5.9.5+'s mro:: interfaces that are supported here, and you want
  compatibility with older Perls, this is the module for you.


pkgId: 49e712e60deb61f8a30c3b8e25de71ae88e81b2ef440f9b07709c539a3cd8222
name: perl-Mail-DKIM
arch: noarch
version: 0.54
epoch: 0
release: 1.el8
summary: Sign and verify Internet mail with DKIM/DomainKey signatures
url: http://dkimproxy.sourceforge.net/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Mail-DKIM-0.54-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Mail-DKIM-0.54-1.el8.noarch.rpm
checksum_type: sha256
description:
  This module implements the various components of the DKIM and DomainKeys
  message-signing and verifying standards for Internet mail. It currently
  tries to implement RFC4871 (for DKIM) and RFC4870 (DomainKeys).

  It is required if you wish to enable DKIM checking in SpamAssassin via the
  Mail::SpamAssassin::Plugin::DKIM plugin.


pkgId: f57c8695f849a1967dc6fef91905203dba94ba7e5d4511d6ae47e1e9543608a9
name: perl-Mail-SPF
arch: noarch
version: 2.9.0
epoch: 0
release: 15.el8
summary: Object-oriented implementation of Sender Policy Framework
url: http://search.cpan.org/dist/Mail-SPF/
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Mail-SPF-2.9.0-15.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Mail-SPF-2.9.0-15.el8.noarch.rpm
checksum_type: sha256
description:
  Mail::SPF is an object-oriented implementation of Sender Policy Framework
  (SPF). See http://www.openspf.org for more information about SPF.


pkgId: 48bc1e88fe9a229a0dc836a935a8ade42d323442a5faebea4cc66d751180f6f4
name: perl-Math-BigRat
arch: noarch
version: 0.2614
epoch: 0
release: 1.el8
summary: Arbitrary big rational numbers
url: http://search.cpan.org/dist/Math-BigRat/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Math-BigRat-0.2614-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Math-BigRat-0.2614-1.el8.noarch.rpm
checksum_type: sha256
description:
  Math::BigRat complements Math::BigInt and Math::BigFloat by providing
  support for arbitrary big rational numbers.


pkgId: 5977d9fc9755bcf13d32b2625c0771e78028afae139b0e06f07b894c16543bcb
name: perl-Math-Complex
arch: noarch
version: 1.59
epoch: 0
release: 404.module+el8.1.0+2926+ce7246ad
summary: Complex numbers and trigonometric functions
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Math-Complex-1.59-404.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This package lets you create and manipulate complex numbers. By default, Perl
  limits itself to real numbers, but an extra "use" statement brings full
  complex support, along with a full set of mathematical functions typically
  associated with and/or extended to complex numbers.


pkgId: 26dcfa9602b13d9237bec42b2e01432840def8b4e84f41d4f6eda237b500ed2f
name: perl-Memoize
arch: noarch
version: 1.03
epoch: 0
release: 404.module+el8.1.0+2926+ce7246ad
summary: Transparently speed up functions by caching return values
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Memoize-1.03-404.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  Memoizing a function makes it faster by trading space for time. It does
  this by caching the return values of the function in a table. If you call
  the function again with the same arguments, memoize jumps in and gives
  you the value out of the table, instead of letting the function compute
  the value all over again.


pkgId: 5030f1b6c398519d0a3068f3873c9bea9487299fb019b419f92b67283d97a69b
name: perl-Module-Build
arch: noarch
version: 0.42.24
epoch: 2
release: 5.el8
summary: Build and install Perl modules
url: http://search.cpan.org/dist/Module-Build/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Module-Build-0.42.24-5.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Module-Build-0.42.24-5.el8.noarch.rpm
checksum_type: sha256
description:
  Module::Build is a system for building, testing, and installing Perl
  modules. It is meant to be an alternative to ExtUtils::MakeMaker.
  Developers may alter the behavior of the module through sub-classing in a
  much more straightforward way than with MakeMaker. It also does not require
  a make on your system - most of the Module::Build code is pure-perl and
  written in a very cross-platform way. In fact, you don't even need a shell,
  so even platforms like MacOS (traditional) can use it fairly easily. Its
  only prerequisites are modules that are included with perl 5.6.0, and it
  works fine on perl 5.005 if you can install a few additional modules.


pkgId: 72a4ff4290d3e62461c912b7f8987fb742cb64771708bfbae94e1da1e22314e1
name: perl-Module-CPANfile
arch: noarch
version: 1.1002
epoch: 0
release: 7.module+el8.1.0+2942+110089f5
summary: Parse cpanfile
url: http://search.cpan.org/dist/Module-CPANfile/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: perl-Module-CPANfile-1.1002-7.module+el8.1.0+2942+110089f5.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Module-CPANfile-1.1002-7.module+el8.1.0+2942+110089f5.noarch.rpm
checksum_type: sha256
description:
  Module::CPANfile is a tool to handle cpanfile format to load application
  specific dependencies, not just for CPAN distributions.


pkgId: 8486b653d3361fe10e47af4b19370484cd213f58a0584e2019617b75f8b60c9c
name: perl-Module-CoreList
arch: noarch
version: 5.20180414
epoch: 1
release: 2.module+el8.1.0+2926+ce7246ad
summary: What modules are shipped with versions of perl
url: http://search.cpan.org/dist/Module-CoreList/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Module-CoreList-5.20180414-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Module-CoreList-5.20180414-2.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  Module::CoreList provides information on which core and dual-life modules
  are shipped with each version of perl.


pkgId: ea1def0b6a022bddef87ff665d198a5f6c7884156d6c5d6653d203f3d9fbdc87
name: perl-Module-CoreList-tools
arch: noarch
version: 5.20180414
epoch: 1
release: 2.module+el8.1.0+2926+ce7246ad
summary: Tool for listing modules shipped with perl
url: http://search.cpan.org/dist/Module-CoreList/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Module-CoreList-5.20180414-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Module-CoreList-tools-5.20180414-2.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This package provides a corelist(1) tool which can be used to query what
  modules were shipped with given perl version.


pkgId: 8ab03c7899d84fa7d21d417054f25f84edad8a9d1b06a4f483a4cb49bb77acb7
name: perl-Module-Load
arch: noarch
version: 0.32
epoch: 1
release: 395.el8
summary: Run-time require of both modules and files
url: http://search.cpan.org/dist/Module-Load/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Module-Load-0.32-395.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Module-Load-0.32-395.el8.noarch.rpm
checksum_type: sha256
description:
  If you consult "perldoc -f require" you will see that "require" will behave
  differently when given a bare-word or a string. In the case of a string,
  "require" assumes you are wanting to load a file. But in the case of
  a bare-word, it assumes you mean a module.

  This gives nasty overhead when you are trying to dynamically require modules
  at run-time, since you will need to change the module notation to a file
  notation fitting the particular platform you are on.

  "load" eliminates the need for this overhead and will just DWYM.


pkgId: 51ce3fc1cc90912c6fe3caa0ded308b2c17974628b5de0de8a954eeaacf8efeb
name: perl-Module-Load-Conditional
arch: noarch
version: 0.68
epoch: 0
release: 395.el8
summary: Looking up module information and loading at run-time
url: http://search.cpan.org/dist/Module-Load-Conditional/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Module-Load-Conditional-0.68-395.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Module-Load-Conditional-0.68-395.el8.noarch.rpm
checksum_type: sha256
description:
  This module provides simple ways to query and possibly load any of the modules
  you have installed on your system during run-time.


pkgId: 716876eef345eb9ca80e23730514960f600107f6faf5e42f804170d03cacf309
name: perl-Module-Loaded
arch: noarch
version: 0.08
epoch: 1
release: 404.module+el8.1.0+2926+ce7246ad
summary: Mark modules as loaded or unloaded
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Module-Loaded-0.08-404.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  When testing applications, often you find yourself needing to provide
  functionality in your test environment that would usually be provided by
  external modules. Rather than munging the %INC by hand to mark these external
  modules as loaded, so they are not attempted to be loaded by perl, this module
  offers you a very simple way to mark modules as loaded and/or unloaded.


pkgId: a346a7e7b46cde857c4b60d23715ff904d34c328de21b4c1a880ccc7660d8139
name: perl-Module-Metadata
arch: noarch
version: 1.000033
epoch: 0
release: 395.el8
summary: Gather package and POD information from perl module files
url: http://search.cpan.org/dist/Module-Metadata/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Module-Metadata-1.000033-395.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Module-Metadata-1.000033-395.el8.noarch.rpm
checksum_type: sha256
description:
  This module provides a standard way to gather metadata about a .pm file
  without executing unsafe code.


pkgId: 6b35220c8ac548d3f33082678e44f4eaece80c065ab6def022f3ab71393b3e24
name: perl-Module-Pluggable
arch: noarch
version: 5.2
epoch: 2
release: 7.el8
summary: Automatically give your module the ability to have plugins
url: http://search.cpan.org/dist/Module-Pluggable/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Module-Pluggable-5.2-7.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Module-Pluggable-5.2-7.el8.noarch.rpm
checksum_type: sha256
description:
  This package provides a simple but, hopefully, extensible way of having
  'plugins' for your module. Essentially all it does is export a method into
  your name space that looks through a search path for .pm files and turn those
  into class names. Optionally it instantiates those classes for you.


pkgId: 3f98b3e9a9c513e49ca3a829c29b7b33941cc7f42cb7e73221333027dea744c7
name: perl-Module-Runtime
arch: noarch
version: 0.016
epoch: 0
release: 2.el8
summary: Runtime module handling
url: http://search.cpan.org/dist/Module-Runtime/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Module-Runtime-0.016-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Module-Runtime-0.016-2.el8.noarch.rpm
checksum_type: sha256
description:
  The functions exported by this module deal with runtime handling of Perl
  modules, which are normally handled at compile time.


pkgId: e7fba3cba0fb095daa0265f8098e8c13a3a5463d8bd7bb9ecec08da45c6311d6
name: perl-Mozilla-CA
arch: noarch
version: 20160104
epoch: 0
release: 7.el8
summary: Mozilla's CA cert bundle in PEM format
url: http://search.cpan.org/dist/Mozilla-CA/
rpm_license: MPLv2.0
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: i686.ab.2
rpm_sourcerpm: perl-Mozilla-CA-20160104-7.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Mozilla-CA-20160104-7.el8.noarch.rpm
checksum_type: sha256
description:
  Mozilla::CA provides a path to ca-certificates copy of Mozilla's bundle of
  certificate authority certificates in a form that can be consumed by modules
  and libraries based on OpenSSL.


pkgId: b513f0f995a44deb041a014ecd11b80347f4863b21e4860d3dc476821be4aa73
name: perl-NDBM_File
arch: x86_64
version: 1.15
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Tied access to ndbm files
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-NDBM_File-1.15-471.module+el8.6.0+13324+628a2397.x86_64.rpm
checksum_type: sha256
description:
  NDBM_File establishes a connection between a Perl hash variable and a file in
  ndbm format. You can manipulate the data in the file just as if it were in
  a Perl hash, but when your program exits, the data will remain in the file, to
  be used the next time your program runs.


pkgId: f79a5135f2a5b8175ec0d1e1bc4197398c911a16b1bf347049b66bce10fd969a
name: perl-NEXT
arch: noarch
version: 0.67
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Pseudo-class that allows method redispatch
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-NEXT-0.67-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  The NEXT module adds a pseudo-class named "NEXT" to any program that uses it.
  If a method "m" calls "$self->NEXT::m()", the call to "m" is redispatched as
  if the calling method had not originally been found.


pkgId: 409cb978b9bf07a4cc9c7a64adaf154a001c1f2d484b2d3637541e7016ce4e31
name: perl-NTLM
arch: noarch
version: 1.09
epoch: 0
release: 17.el8
summary: NTLM Perl module
url: http://search.cpan.org/dist/NTLM/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: i686.ab.2
rpm_sourcerpm: perl-NTLM-1.09-17.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-NTLM-1.09-17.el8.noarch.rpm
checksum_type: sha256
description:
  This module provides methods to use NTLM authentication.  It can be used
  as an authenticate method with the Mail::IMAPClient module to perform
  the challenge/response mechanism for NTLM connections or it can be used
  on its own for NTLM authentication with other protocols (eg. HTTP).


pkgId: af0dd76e9bf57de8f4047189e8df4e1cf21b1efee774d44e64acfbcd957712a7
name: perl-Net
arch: noarch
version: 1.02
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: By-name interface to Perl built-in network resolver
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Net-1.02-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This package provide object-oriented interface to Perl built-in gethost*(),
  getnet*(), getproto*(), and getserv*() functions.


pkgId: fd59e10c691ffb6c20bb04638ee229e0ea94ab0c2306a3fe304712a218bbc331
name: perl-Net-DNS
arch: noarch
version: 1.15
epoch: 0
release: 1.el8
summary: DNS resolver modules for Perl
url: http://www.net-dns.org/
rpm_license: (GPL+ or Artistic) and MIT
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Net-DNS-1.15-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Net-DNS-1.15-1.el8.noarch.rpm
checksum_type: sha256
description:
  Net::DNS is a collection of Perl modules that act as a Domain Name System
  (DNS) resolver. It allows the programmer to perform DNS queries that are
  beyond the capabilities of gethostbyname and gethostbyaddr.

  The programmer should be somewhat familiar with the format of a DNS packet and
  its various sections. See RFC 1035 or DNS and BIND (Albitz & Liu) for details.


pkgId: dd0d5e0590406308f3fb4b95be4f2ef827d011262e2b76bd2e8069b20798e80b
name: perl-Net-HTTP
arch: noarch
version: 6.17
epoch: 0
release: 2.el8
summary: Low-level HTTP connection (client)
url: http://search.cpan.org/dist/Net-HTTP/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: i686.ab.2
rpm_sourcerpm: perl-Net-HTTP-6.17-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Net-HTTP-6.17-2.el8.noarch.rpm
checksum_type: sha256
description:
  The Net::HTTP class is a low-level HTTP client. An instance of the
  Net::HTTP class represents a connection to an HTTP server. The HTTP
  protocol is described in RFC 2616. The Net::HTTP class supports HTTP/1.0
  and HTTP/1.1.


pkgId: 7de3169155357ca2d94aebc247e2202c9f81d70e96f5e53ca219f693a82d1e6c
name: perl-Net-SSLeay
arch: x86_64
version: 1.88
epoch: 0
release: 1.el8
summary: Perl extension for using OpenSSL
url: https://metacpan.org/release/Net-SSLeay
rpm_license: Artistic 2.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Net-SSLeay-1.88-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Net-SSLeay-1.88-1.el8.x86_64.rpm
checksum_type: sha256
description:
  This module offers some high level convenience functions for accessing
  web pages on SSL servers (for symmetry, same API is offered for
  accessing http servers, too), a sslcat() function for writing your own
  clients, and finally access to the SSL API of SSLeay/OpenSSL package
  so you can write servers or clients for more complicated applications.


pkgId: 84ed469c97b169e06d58a632a84d24f36f594a76c48d399e7cd109cc60e5b580
name: perl-Net-Server
arch: noarch
version: 2.009
epoch: 0
release: 3.el8
summary: Extensible, general Perl server engine
url: http://search.cpan.org/dist/Net-Server/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Net-Server-2.009-3.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Net-Server-2.009-3.el8.noarch.rpm
checksum_type: sha256
description:
  An extensible, class oriented module written in perl and intended to
  be the back end layer of internet protocol servers.


pkgId: 92f932ec89d4c1da0491eb5f5236133b5d4078eb781b21252fd5df3a37f4338d
name: perl-NetAddr-IP
arch: x86_64
version: 4.079
epoch: 0
release: 7.el8
summary: Manages IPv4 and IPv6 addresses and subnets
url: http://search.cpan.org/dist/NetAddr-IP/
rpm_license: GPLv2+ and (GPLv2+ or Artistic clarified)
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-NetAddr-IP-4.079-7.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-NetAddr-IP-4.079-7.el8.x86_64.rpm
checksum_type: sha256
description:
  This module provides an object-oriented abstraction on top of IP addresses
  or IP subnets, that allows for easy manipulations.


pkgId: 17850ed0a6e1c855492995075010cae63215f28fc4f1848152d0618df63a7ed7
name: perl-ODBM_File
arch: x86_64
version: 1.16
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Tied access to odbm files
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-ODBM_File-1.16-471.module+el8.6.0+13324+628a2397.x86_64.rpm
checksum_type: sha256
description:
  ODBM_File establishes a connection between a Perl hash variable and a file in
  odbm format. You can manipulate the data in the file just as if it were in
  a Perl hash, but when your program exits, the data will remain in the file, to
  be used the next time your program runs.


pkgId: 1b6959b0dd01fd9a806165c4d2acb1db06fc199a817d39b4baa4634dc0248fb3
name: perl-Object-HashBase
arch: noarch
version: 0.008
epoch: 0
release: 1.module+el8.3.0+6718+7f269185
summary: Build hash-based classes
url: https://metacpan.org/release/Object-HashBase
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: perl-Object-HashBase-0.008-1.module+el8.3.0+6718+7f269185.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Object-HashBase-0.008-1.module+el8.3.0+6718+7f269185.noarch.rpm
checksum_type: sha256
description:
  This package is used to generate classes based on hash references. Using this
  class will give you a new() method, as well as generating accessors you
  request.  Generated accessors will be getters, set_ACCESSOR setters will also
  be generated for you. You also get constants for each accessor (all caps)
  which return the key into the hash for that accessor. Single inheritance is
  also supported.


pkgId: ef44396ef6560b469245f08edd55075a33e3be1238f9fa96f9aea863bb0e87cd
name: perl-Object-HashBase-tools
arch: noarch
version: 0.008
epoch: 0
release: 1.module+el8.3.0+6718+7f269185
summary: Generate inlined Object::HashBase Perl module
url: https://metacpan.org/release/Object-HashBase
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: perl-Object-HashBase-0.008-1.module+el8.3.0+6718+7f269185.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Object-HashBase-tools-0.008-1.module+el8.3.0+6718+7f269185.noarch.rpm
checksum_type: sha256
description:
  hashbase_inc.pl script generates a Perl module that contains
  a Object::HashBase module mangled into a name space of your choice. It can
  also generate the tests for it.


pkgId: 45bc3718e330bcef6684b3fd279f38cad30de798865c7e6baaf98807afaa62d2
name: perl-Opcode
arch: x86_64
version: 1.48
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Disable named opcodes when compiling a perl code
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Opcode-1.48-471.module+el8.6.0+13324+628a2397.x86_64.rpm
checksum_type: sha256
description:
  The Opcode module allows you to define an operator mask to be in effect when
  perl next compiles any code. Attempting to compile code which contains
  a masked opcode will cause the compilation to fail with an error. The code
  will not be executed.


pkgId: 62dada59f884f01649f43a93e6b34b1283c1266b1ff2a6873e55f7caa3eb0f8e
name: perl-PCP-LogImport
arch: x86_64
version: 5.1.1
epoch: 0
release: 4.el8_3
summary: Performance Co-Pilot (PCP) Perl bindings for importing external data into PCP archives
url: https://pcp.io
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pcp-5.1.1-4.el8_3.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-PCP-LogImport-5.1.1-4.el8_3.x86_64.rpm
checksum_type: sha256
description:
  The PCP::LogImport module contains the Perl language bindings for
  importing data in various 3rd party formats into PCP archives so
  they can be replayed with standard PCP monitoring tools.


pkgId: 1a5eb53a567b477b57506345887cfacce320cd83a1932e7d29d35a64bdfab8f2
name: perl-PCP-LogSummary
arch: x86_64
version: 5.1.1
epoch: 0
release: 4.el8_3
summary: Performance Co-Pilot (PCP) Perl bindings for post-processing output of pmlogsummary
url: https://pcp.io
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pcp-5.1.1-4.el8_3.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-PCP-LogSummary-5.1.1-4.el8_3.x86_64.rpm
checksum_type: sha256
description:
  The PCP::LogSummary module provides a Perl module for using the
  statistical summary data produced by the Performance Co-Pilot
  pmlogsummary utility.  This utility produces various averages,
  minima, maxima, and other calculations based on the performance
  data stored in a PCP archive.  The Perl interface is ideal for
  exporting this data into third-party tools (e.g. spreadsheets).


pkgId: b44f86dde554bc245247e3d65c93aa2b64d529d53734ad7bc120e3f422b6906f
name: perl-PCP-MMV
arch: x86_64
version: 5.1.1
epoch: 0
release: 4.el8_3
summary: Performance Co-Pilot (PCP) Perl bindings for PCP Memory Mapped Values
url: https://pcp.io
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pcp-5.1.1-4.el8_3.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-PCP-MMV-5.1.1-4.el8_3.x86_64.rpm
checksum_type: sha256
description:
  The PCP::MMV module contains the Perl language bindings for
  building scripts instrumented with the Performance Co-Pilot
  (PCP) Memory Mapped Value (MMV) mechanism.
  This mechanism allows arbitrary values to be exported from an
  instrumented script into the PCP infrastructure for monitoring
  and analysis with pmchart, pmie, pmlogger and other PCP tools.


pkgId: 5b9f20880e0f4a9dc101d3efe4379b5d40b0384510169c58167a85287dc3b895
name: perl-PCP-PMDA
arch: x86_64
version: 5.1.1
epoch: 0
release: 4.el8_3
summary: Performance Co-Pilot (PCP) Perl bindings and documentation
url: https://pcp.io
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pcp-5.1.1-4.el8_3.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-PCP-PMDA-5.1.1-4.el8_3.x86_64.rpm
checksum_type: sha256
description:
  The PCP::PMDA Perl module contains the language bindings for
  building Performance Metric Domain Agents (PMDAs) using Perl.
  Each PMDA exports performance data for one specific domain, for
  example the operating system kernel, Cisco routers, a database,
  an application, etc.


pkgId: fc8d5005ca7cb6c32f3b7b6b332ce0578bbe815cb6fd4096192383be702ab433
name: perl-POSIX
arch: x86_64
version: 1.94
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Perl interface to IEEE Std 1003.1
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-POSIX-1.94-471.module+el8.6.0+13324+628a2397.x86_64.rpm
checksum_type: sha256
description:
  The POSIX module permits you to access all (or nearly all) the standard POSIX
  1003.1 identifiers. Many of these identifiers have been given Perl interfaces.


pkgId: 2b2d1c11f4800b76450082701b870716a39bfd050353869b1afef63da8fc5f71
name: perl-Package-Generator
arch: noarch
version: 1.106
epoch: 0
release: 11.el8
summary: Generate new packages quickly and easily
url: http://search.cpan.org/dist/Package-Generator/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Package-Generator-1.106-11.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Package-Generator-1.106-11.el8.noarch.rpm
checksum_type: sha256
description:
  This module lets you quickly and easily construct new packages. It gives
  them unused names and sets up their package data, if provided.


pkgId: 265e2eb92ee764aaee206515b193ee7e2b9db53159015fd5ca3d087769703d02
name: perl-Params-Check
arch: noarch
version: 0.38
epoch: 1
release: 395.el8
summary: Generic input parsing/checking mechanism
url: http://search.cpan.org/dist/Params-Check/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Params-Check-0.38-395.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Params-Check-0.38-395.el8.noarch.rpm
checksum_type: sha256
description:
  This is a generic input parsing/checking mechanism. It allows you to
  validate input via a template. The only requirement is that the arguments
  must be named.


pkgId: 6aa4c689d0862cfc48d7f2cda1ca37a2c1c98ee8e9a9bced088707a84f57f213
name: perl-Params-Util
arch: x86_64
version: 1.07
epoch: 0
release: 22.el8
summary: Simple standalone parameter-checking functions
url: http://search.cpan.org/dist/Params-Util/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Params-Util-1.07-22.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Params-Util-1.07-22.el8.x86_64.rpm
checksum_type: sha256
description:
  Params::Util provides a basic set of importable functions that
  makes checking parameters a hell of a lot easier.


pkgId: f1fc3806bea29e6ade50fca23e9c37179386f46f4587923b8d3ec8eda84ee6c9
name: perl-Parse-PMFile
arch: noarch
version: 0.41
epoch: 0
release: 7.module+el8.1.0+2942+110089f5
summary: Parses .pm file as PAUSE does
url: https://metacpan.org/release/Parse-PMFile
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: perl-Parse-PMFile-0.41-7.module+el8.1.0+2942+110089f5.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Parse-PMFile-0.41-7.module+el8.1.0+2942+110089f5.noarch.rpm
checksum_type: sha256
description:
  The most of the code of this module is taken from the PAUSE code as of
  April 2013 almost verbatim. Thus, the heart of this module should be quite
  stable. However, I made it not to use pipe ("-|") as well as I stripped
  database-related code. If you encounter any issue, that's most probably
  because of my modification.


pkgId: 3b4dd811421259c95da7b9fff15f7cd3f2151e3fb124042bcceb9a33c7933a9a
name: perl-Perl-OSType
arch: noarch
version: 1.010
epoch: 0
release: 396.el8
summary: Map Perl operating system names to generic types
url: http://search.cpan.org/dist/Perl-OSType/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Perl-OSType-1.010-396.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Perl-OSType-1.010-396.el8.noarch.rpm
checksum_type: sha256
description:
  Modules that provide OS-specific behaviors often need to know if the current
  operating system matches a more generic type of operating systems. For example,
  'linux' is a type of 'Unix' operating system and so is 'freebsd'.

  This module provides a mapping between an operating system name as given by $^O
  and a more generic type. The initial version is based on the OS type mappings
  provided in Module::Build and ExtUtils::CBuilder (thus, Microsoft operating
  systems are given the type 'Windows' rather than 'Win32').


pkgId: 4189f245b3a16db616eda70651319e27af6e05768c9c7d84abbfbff74a95ab1a
name: perl-PerlIO-via-QuotedPrint
arch: noarch
version: 0.08
epoch: 0
release: 395.el8
summary: PerlIO layer for quoted-printable strings
url: http://search.cpan.org/dist/PerlIO-via-QuotedPrint/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-PerlIO-via-QuotedPrint-0.08-395.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-PerlIO-via-QuotedPrint-0.08-395.el8.noarch.rpm
checksum_type: sha256
description:
  This module implements a PerlIO layer that works on files encoded in the
  quoted-printable format. It will decode from quoted-printable while
  reading from a handle, and it will encode as quoted-printable while
  writing to a handle.


pkgId: bd84cedbda0d2c7899e91960cd035cab660d44f37f130b6712bbe3a9ca49deb6
name: perl-Pod-Checker
arch: noarch
version: 1.73
epoch: 4
release: 395.el8
summary: Check POD documents for syntax errors
url: http://search.cpan.org/dist/Pod-Checker/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Pod-Checker-1.73-395.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Pod-Checker-1.73-395.el8.noarch.rpm
checksum_type: sha256
description:
  Module and tools to verify POD documentation contents for compliance with the
  Plain Old Documentation format specifications.


pkgId: 6244b83d1d003fb72f03809c155452dfb1fa7e73b84b3c5bffc45406880653e5
name: perl-Pod-Html
arch: noarch
version: 1.22.01
epoch: 0
release: 404.module+el8.1.0+2926+ce7246ad
summary: Convert POD files to HTML
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Pod-Html-1.22.01-404.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This package converts files from POD format (see perlpod) to HTML format. It
  can automatically generate indexes and cross-references, and it keeps a cache
  of things it knows how to cross-reference.


pkgId: 6530273e2ed4130f490b5ed3df424d5d5d2d8b26f232636b226b65828876f24b
name: perl-Pod-LaTeX
arch: noarch
version: 0.61
epoch: 0
release: 302.el8
summary: Convert POD data to formatted LaTeX
url: http://search.cpan.org/dist/Pod-LaTeX/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Pod-LaTeX-0.61-302.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Pod-LaTeX-0.61-302.el8.noarch.rpm
checksum_type: sha256
description:
  Pod::LaTeX is a module to convert documentation in the POD format into
  LaTeX. A pod2latex replacement command is provided.


pkgId: b209d44fcbda5334caefb3cad6d3a59df9e91f389f63f560f81de5f976878faa
name: perl-Pod-Parser
arch: noarch
version: 1.63
epoch: 0
release: 1001.module+el8.1.0+2926+ce7246ad
summary: Basic perl modules for handling Plain Old Documentation (POD)
url: http://search.cpan.org/dist/Pod-Parser/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Pod-Parser-1.63-1001.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Pod-Parser-1.63-1001.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This software distribution contains the packages for using Perl5 POD (Plain
  Old Documentation). See the "perlpod" and "perlsyn" manual pages from your
  Perl5 distribution for more information about POD.


pkgId: 365b69014fe582eb08c2ab7b45e6707e4be5969c66be408904c4fb74d5116718
name: perl-Pod-Perldoc
arch: noarch
version: 3.28
epoch: 0
release: 397.module+el8.1.0+2926+ce7246ad
summary: Look up Perl documentation in Pod format
url: http://search.cpan.org/dist/Pod-Perldoc/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Pod-Perldoc-3.28-397.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Pod-Perldoc-3.28-397.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  perldoc looks up a piece of documentation in .pod format that is embedded
  in the perl installation tree or in a perl script, and displays it via
  "groff -man | $PAGER". This is primarily used for the documentation for
  the perl library modules.


pkgId: 2dbb091edf8c7542930a2b5ca42fc76954bf8b1aae2126eef985a6b8ea5934c6
name: perl-Pod-Perldoc
arch: noarch
version: 3.28.01
epoch: 0
release: 442.module+el8.3.0+6718+7f269185
summary: Look up Perl documentation in Pod format
url: https://metacpan.org/release/Pod-Perldoc
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: perl-Pod-Perldoc-3.28.01-442.module+el8.3.0+6718+7f269185.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Pod-Perldoc-3.28.01-442.module+el8.3.0+6718+7f269185.noarch.rpm
checksum_type: sha256
description:
  perldoc looks up a piece of documentation in POD format that is embedded
  in the perl installation tree or in a Perl script, and displays it via
  "groff -man | $PAGER". This is primarily used for the documentation for
  the Perl library modules.


pkgId: 4fc63d1b9d9fb9cc6c39e4bc5143bc90c106d617ac0fbfdd925339a76ad2a0d9
name: perl-Pod-Plainer
arch: noarch
version: 1.04
epoch: 0
release: 7.el8
summary: Perl extension for converting Pod to old-style Pod
url: http://search.cpan.org/dist/Pod-Plainer/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Pod-Plainer-1.04-7.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Pod-Plainer-1.04-7.el8.noarch.rpm
checksum_type: sha256
description:
  Pod::Plainer uses Pod::Parser which takes Pod with the (new) 'C<< .. >>'
  constructs and returns the old(er) style with just 'C<>'; '<' and '>' are
  replaced by 'E<lt>' and 'E<gt>'.
  This can be used to pre-process Pod before using tools which do not
  recognize the new style Pods.


pkgId: e2d4049319867d4b3b7b3c1e26ce51e49613f649f847eb0124ddeda4a3953141
name: perl-Pod-Simple
arch: noarch
version: 3.35
epoch: 1
release: 396.module+el8.1.0+2926+ce7246ad
summary: Framework for parsing POD documentation
url: http://search.cpan.org/dist/Pod-Simple/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Pod-Simple-3.35-396.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Pod-Simple-3.35-396.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  Pod::Simple is a Perl library for parsing text in the Pod ("plain old
  documentation") markup language that is typically used for writing
  documentation for Perl and for Perl modules.


pkgId: abf197416699a5275a79a70428e6fd23cf1afbdfe4f4b6ab0e7a9fe04eff2c2a
name: perl-Pod-Simple
arch: noarch
version: 3.40
epoch: 1
release: 1.module+el8.3.0+6718+7f269185
summary: Framework for parsing POD documentation
url: https://metacpan.org/release/Pod-Simple
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: perl-Pod-Simple-3.40-1.module+el8.3.0+6718+7f269185.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Pod-Simple-3.40-1.module+el8.3.0+6718+7f269185.noarch.rpm
checksum_type: sha256
description:
  Pod::Simple is a Perl library for parsing text in the POD (plain old
  documentation) markup language that is typically used for writing
  documentation for Perl and for Perl modules.


pkgId: afc0e3245cda7fa1f9a07e1699e4aeefd3a8d718541ec8fbfeb0638a79abe1d7
name: perl-Pod-Usage
arch: noarch
version: 1.69
epoch: 4
release: 396.module+el8.1.0+2926+ce7246ad
summary: Print a usage message from embedded POD documentation
url: http://search.cpan.org/dist/Pod-Usage/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Pod-Usage-1.69-396.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Pod-Usage-1.69-396.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  pod2usage will print a usage message for the invoking script (using its
  embedded POD documentation) and then exit the script with the desired exit
  status. The usage message printed may have any one of three levels of
  "verboseness": If the verbose level is 0, then only a synopsis is printed.
  If the verbose level is 1, then the synopsis is printed along with a
  description (if present) of the command line options and arguments. If the
  verbose level is 2, then the entire manual page is printed.


pkgId: 0099ed4c9af801183bcd39918c167f288e8fd9207dc31e7e6e666b580c1821df
name: perl-SNMP_Session
arch: noarch
version: 1.13
epoch: 0
release: 17.el8
summary: SNMP support for Perl 5
url: http://code.google.com/p/snmp-session/
rpm_license: Artistic 2.0
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-SNMP_Session-1.13-17.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-SNMP_Session-1.13-17.el8.noarch.rpm
checksum_type: sha256
description:
  Pure Perl SNMP v1 and SNMP v2 support for Perl 5.

  The SNMP operations currently supported are "get", "get-next", "get-bulk"
  and "set", as well as trap generation and reception.


pkgId: ff8fcc05959f90bd96f5db4cf5bfed8237686d321287d1b33dc5c35a79c7f67a
name: perl-Safe
arch: noarch
version: 2.41
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Compile and execute code in restricted compartments
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Safe-2.41-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  The Safe extension module allows the creation of compartments in which Perl
  code can be evaluated. Please note that the restriction is not suitable for
  security purposes.


pkgId: 11c02b217b0aec12a1ff073eebcca1ea8f0daa01579f25ac625119361a9564a3
name: perl-Scalar-List-Utils
arch: x86_64
version: 1.48
epoch: 3
release: 2.module+el8.1.0+2926+ce7246ad
summary: A selection of general-utility scalar and list subroutines
url: http://search.cpan.org/dist/Scalar-List-Utils/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Scalar-List-Utils-1.48-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Scalar-List-Utils-1.48-2.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  This package contains a selection of subroutines that people have expressed
  would be nice to have in the perl core, but the usage would not really be
  high enough to warrant the use of a keyword, and the size so small such
  that being individual extensions would be wasteful.


pkgId: 07c0244789ae2c6a6f0e899521e2c2d31c01242fa1734d56f680986d3edcafb4
name: perl-Search-Dict
arch: noarch
version: 1.07
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Search for a key in a dictionary file
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Search-Dict-1.07-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This module sets file position in a file handle to be first line greater than
  or equal (string-wise) to a key.


pkgId: 0fcc92cf1bad5930a65b2b4bd81e912dfb0e73c8a839fcd642fa2455dc979d74
name: perl-SelectSaver
arch: noarch
version: 1.02
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Save and restore selected file handle
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-SelectSaver-1.02-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  A "SelectSaver" object contains a reference to the file handle that was
  selected when it was created. When the object is destroyed, it re-selects the
  file handle that was selected when it was created.


pkgId: a1fc1dbf103d3ca3d0ba68b4b614480af57eafc191ae4d96483a43736919b798
name: perl-SelfLoader
arch: noarch
version: 1.23
epoch: 0
release: 404.module+el8.1.0+2926+ce7246ad
summary: Load functions only on demand
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-SelfLoader-1.23-404.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This Perl module tells its users that functions in a package are to be
  autoloaded from after the "__DATA__" token. See also "Autoloading" in
  perlsub.


pkgId: 11daf7473923a5aadc24c5b403cbb92db663d695ddf6fb979abe4e32f36b329f
name: perl-Socket
arch: x86_64
version: 2.027
epoch: 4
release: 4.module+el8.1.0+3041+ea55385e
summary: Networking constants and support functions
url: http://search.cpan.org/dist/Socket/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Socket-2.027-4.module+el8.1.0+3041+ea55385e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Socket-2.027-4.module+el8.1.0+3041+ea55385e.x86_64.rpm
checksum_type: sha256
description:
  This module provides a variety of constants, structure manipulators and other
  functions related to socket-based networking. The values and functions
  provided are useful when used in conjunction with Perl core functions such as
  socket(), setsockopt() and bind(). It also provides several other support
  functions, mostly for dealing with conversions of network addresses between
  human-readable and native binary forms, and for hostname resolver operations.


pkgId: 0eae9c0a1f197ba8dddded9e3856d4c11b82847facff66eb223029a4f696998a
name: perl-Socket
arch: x86_64
version: 2.029
epoch: 4
release: 4.module+el8.3.0+6718+7f269185
summary: Networking constants and support functions
url: https://metacpan.org/release/Socket
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: perl-Socket-2.029-4.module+el8.3.0+6718+7f269185.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Socket-2.029-4.module+el8.3.0+6718+7f269185.x86_64.rpm
checksum_type: sha256
description:
  This Perl module provides a variety of constants, structure manipulators and
  other functions related to socket-based networking. The values and functions
  provided are useful when used in conjunction with Perl core functions such as
  socket(), setsockopt() and bind(). It also provides several other support
  functions, mostly for dealing with conversions of network addresses between
  human-readable and native binary forms, and for hostname resolver operations.


pkgId: 6bae03ce9aacbab8da3f4683885f707b512f8da909be965f59164685acbf9816
name: perl-Socket6
arch: x86_64
version: 0.28
epoch: 0
release: 6.el8
summary: IPv6 related part of the C socket.h defines and structure manipulators
url: http://search.cpan.org/dist/Socket6/
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: perl-Socket6-0.28-6.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Socket6-0.28-6.el8.x86_64.rpm
checksum_type: sha256
description:
  This module supports getaddrinfo() and getnameinfo() to intend to enable
  protocol independent programming. If your environment supports IPv6, IPv6
  related defines such as AF_INET6 are included.


pkgId: c03f21d4215bd9dd094c31801ba60b618b8e362bcedef22dbd2dc3f2e06822df
name: perl-Storable
arch: x86_64
version: 2.56
epoch: 1
release: 369.module+el8.1.0+2926+ce7246ad
summary: Persistence for Perl data structures
url: http://search.cpan.org/dist/Storable/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Storable-2.56-369.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Storable-2.56-369.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  The Storable package brings persistence to your Perl data structures
  containing scalar, array, hash or reference objects, i.e. anything that
  can be conveniently stored to disk and retrieved at a later time.


pkgId: e5f8e64fb7cb7a11958858319411a3329b6dc92317a4964f8a922c1f582ba91b
name: perl-String-CRC32
arch: x86_64
version: 1.6
epoch: 0
release: 4.el8
summary: Perl interface for cyclic redundancy check generation
url: http://search.cpan.org/dist/String-CRC32/
rpm_license: Public Domain
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-String-CRC32-1.6-4.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-String-CRC32-1.6-4.el8.x86_64.rpm
checksum_type: sha256
description:
  This packages provides a perl module to generate checksums from strings and
  from files.

  The checksums are the same as those calculated by ZMODEM, PKZIP, PICCHECK and
  many others.

  There's another perl module called String::CRC, which supports calculation of
  CRC values of various widths (i.e. not just 32 bits), but the generated sums
  differ from those of the programs mentioned above.


pkgId: a413a5d30e6c8aab0eb81d3e309d1281eeca82bf95e4ce6f7513d8aff1d22808
name: perl-String-ShellQuote
arch: noarch
version: 1.04
epoch: 0
release: 24.module+el8.1.0+2942+110089f5
summary: Perl module for quoting strings for passing through the shell
url: http://search.cpan.org/dist/String-ShellQuote/
rpm_license: (GPL+ or Artistic) and GPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: perl-String-ShellQuote-1.04-24.module+el8.1.0+2942+110089f5.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-String-ShellQuote-1.04-24.module+el8.1.0+2942+110089f5.noarch.rpm
checksum_type: sha256
description:
  This package contains a Perl module and a command line utility which
  are useful for quoting strings which are going to pass through the
  shell or a shell-like object.


pkgId: 0d2ad4256afa0bf4b200fcd21b2ebd1554639b81f30de35724479353880372ab
name: perl-Sub-Exporter
arch: noarch
version: 0.987
epoch: 0
release: 15.el8
summary: Sophisticated exporter for custom-built routines
url: https://metacpan.org/release/Sub-Exporter
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Sub-Exporter-0.987-15.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Sub-Exporter-0.987-15.el8.noarch.rpm
checksum_type: sha256
description:
  Sub::Exporter provides a sophisticated alternative to Exporter.pm. It allows
  for renaming, currying/sub-generation, and other cool stuff.

  ACHTUNG! If you're not familiar with Exporter or exporting, read
  Sub::Exporter::Tutorial first!


pkgId: 6d7c7106da02b773a0e8755e6935a4e4541ae4dc9410d49b91a383f161beb6d8
name: perl-Sub-Install
arch: noarch
version: 0.928
epoch: 0
release: 14.el8
summary: Install subroutines into packages easily
url: http://search.cpan.org/dist/Sub-Install/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Sub-Install-0.928-14.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Sub-Install-0.928-14.el8.noarch.rpm
checksum_type: sha256
description:
  This module makes it easy to install subroutines into packages without the
  unsightly mess of no strict or typeglobs lying about where just anyone
  can see them.


pkgId: 59f5b828151bb67a8d796b145706686009e4c02ce1acf40a2bc2886d17639747
name: perl-Sys-Syslog
arch: x86_64
version: 0.35
epoch: 0
release: 397.el8
summary: Perl interface to the UNIX syslog(3) calls
url: http://search.cpan.org/dist/Sys-Syslog/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Sys-Syslog-0.35-397.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Sys-Syslog-0.35-397.el8.x86_64.rpm
checksum_type: sha256
description:
  Sys::Syslog is an interface to the UNIX syslog(3) function. Call syslog() with
  a string priority and a list of printf() arguments just like at syslog(3).


pkgId: af745836d06debefccc18b8bce3ada95c686339584aaf94370f2d7b5a036b502
name: perl-Sys-Virt
arch: x86_64
version: 6.0.0
epoch: 0
release: 1.module+el8.3.0+6423+e4cb6418
summary: Represent and manage a libvirt hypervisor connection
url: https://metacpan.org/release/Sys-Virt
rpm_license: GPLv2+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-spinning
rpm_sourcerpm: perl-Sys-Virt-6.0.0-1.module+el8.3.0+6423+e4cb6418.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Sys-Virt-6.0.0-1.module+el8.3.0+6423+e4cb6418.x86_64.rpm
checksum_type: sha256
description:
  The Sys::Virt module provides a Perl XS binding to the libvirt virtual
  machine management APIs. This allows machines running within arbitrary
  virtualization containers to be managed with a consistent API.


pkgId: 561743896aa5008321ea5d1121098cce59f9054b34e68967d449b31bd355d7ce
name: perl-Term-ANSIColor
arch: noarch
version: 4.06
epoch: 0
release: 397.module+el8.1.0+2926+ce7246ad
summary: Color screen output using ANSI escape sequences
url: http://search.cpan.org/dist/Term-ANSIColor/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Term-ANSIColor-4.06-397.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Term-ANSIColor-4.06-397.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This module has two interfaces, one through color() and colored() and the
  other through constants. It also offers the utility functions uncolor(),
  colorstrip(), colorvalid(), and coloralias(), which have to be explicitly
  imported to be used.


pkgId: c3bbf4f35a08a0a9eb6e593da863bf609914bf903bb7f6546416849e991b01a2
name: perl-Term-Cap
arch: noarch
version: 1.17
epoch: 0
release: 396.module+el8.1.0+2926+ce7246ad
summary: Perl termcap interface
url: http://search.cpan.org/dist/Term-Cap/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Term-Cap-1.17-396.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Term-Cap-1.17-396.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  These are low-level functions to extract and use capabilities from a terminal
  capability (termcap) database.


pkgId: e6a1a32a41128bdd0f1f321a6a1da8f23c9b94e8221443b272b460b890aec1ca
name: perl-Term-ReadLine
arch: noarch
version: 1.17
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Perl interface to various read-line packages
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Term-ReadLine-1.17-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This package is just a front end to some other packages. It's a stub to
  set up a common interface to the various read-line implementations found
  on CPAN (under the "Term::ReadLine::*" name space).


pkgId: 0c1e8470540ebda51b01d6684e90ab473a1e7d62a409bb35f01be7ef7b38ec98
name: perl-TermReadKey
arch: x86_64
version: 2.37
epoch: 0
release: 7.el8
summary: A perl module for simple terminal control
url: http://search.cpan.org/~jstowe/TermReadKey/
rpm_license: (Copyright only) and (Artistic or GPL+)
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-TermReadKey-2.37-7.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-TermReadKey-2.37-7.el8.x86_64.rpm
checksum_type: sha256
description:
  Term::ReadKey is a compiled perl module dedicated to providing simple
  control over terminal driver modes (cbreak, raw, cooked, etc.)
  support for non-blocking reads, if the architecture allows, and some
  generalized handy functions for working with terminals.  One of the
  main goals is to have the functions as portable as possible, so you
  can just plug in "use Term::ReadKey" on any architecture and have a
  good likelyhood of it working.


pkgId: 23bbbe7aea08593c61d29d33833b1a2e36007544524a491a20f10634b5c15c0b
name: perl-Test
arch: noarch
version: 1.28
epoch: 0
release: 404.module+el8.1.0+2926+ce7246ad
summary: Simple framework for writing test scripts
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Test-1.28-404.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  The Test Perl module simplifies the task of writing test files for Perl modules,
  such that their output is in the format that Test::Harness expects to see.


pkgId: 5cae6b36dde82e932299121c7a35afa0059ae7d7db0aed14957814305819e3df
name: perl-Test-Harness
arch: noarch
version: 3.42
epoch: 1
release: 1.el8
summary: Run Perl standard test scripts with statistics
url: http://search.cpan.org/dist/Test-Harness/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Test-Harness-3.42-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Test-Harness-3.42-1.el8.noarch.rpm
checksum_type: sha256
description:
  This package allows tests to be run and results automatically aggregated and
  output to STDOUT.

  Although, for historical reasons, the Test-Harness distribution takes its name
  from this module it now exists only to provide TAP::Harness with an interface
  that is somewhat backwards compatible with Test::Harness 2.xx. If you're
  writing new code consider using TAP::Harness directly instead.


pkgId: 6de5316fa0e54fc73340e84c67d4ba156a82cfd207ffb543d71ec0daa38c327b
name: perl-Test-Simple
arch: noarch
version: 1.302086
epoch: 1
release: 2.module+el8.1.0+2926+ce7246ad
summary: Basic utilities for writing tests
url: http://search.cpan.org/dist/Test-Simple
rpm_license: (GPL+ or Artistic) and CC0 and Public Domain
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Test-Simple-1.302086-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Test-Simple-1.302086-2.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This package provides the bulk of the core testing facilities. For more
  information, see perldoc for Test::Simple, Test::More, etc.

  This package is the CPAN component of the dual-lifed core package Test-Simple.


pkgId: 7a038c471d62c3b3023a91a862443fc1381bd62f0522f29046397be32c6f6126
name: perl-Text-Abbrev
arch: noarch
version: 1.02
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Create an abbreviation table from a list
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Text-Abbrev-1.02-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  It stores all unambiguous truncations of each element of a list as keys in
  an associative array. The values are the original list elements.


pkgId: 349342eb24247f4eb0205518bc65fc7d633c86a12a06d48cb1e3925e6913e573
name: perl-Text-Balanced
arch: noarch
version: 2.03
epoch: 0
release: 395.el8
summary: Extract delimited text sequences from strings
url: http://search.cpan.org/dist/Text-Balanced/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Text-Balanced-2.03-395.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Text-Balanced-2.03-395.el8.noarch.rpm
checksum_type: sha256
description:
  These Perl subroutines may be used to extract a delimited substring, possibly
  after skipping a specified prefix string.


pkgId: 62c6e7f8ab74b7614a09dbeb4e3749074c3e969ccee5fbbc6f7fd62bcd80dada
name: perl-Text-Diff
arch: noarch
version: 1.44
epoch: 0
release: 4.module+el8.1.0+2926+ce7246ad
summary: Perform diffs on files and record sets
url: http://search.cpan.org/dist/Text-Diff/
rpm_license: (GPL+ or Artistic) and (GPLv2+ or Artistic) and MIT
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Text-Diff-1.44-4.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Text-Diff-1.44-4.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  Text::Diff provides a basic set of services akin to the GNU diff utility.
  It is not anywhere near as feature complete as GNU diff, but it is better
  integrated with Perl and available on all platforms. It is often faster
  than shelling out to a system's diff executable for small files, and
  generally slower on larger files.


pkgId: ff2e1b8a6d595ce3bdfab4dfb1bea7ce100cf6717edd4e5fb21cda82eb06b2ed
name: perl-Text-Glob
arch: noarch
version: 0.11
epoch: 0
release: 4.el8
summary: Perl module to match globbing patterns against text
url: http://search.cpan.org/dist/Text-Glob/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Text-Glob-0.11-4.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Text-Glob-0.11-4.el8.noarch.rpm
checksum_type: sha256
description:
  Text::Glob implements glob(3) style matching that can be used to match
  against text, rather than fetching names from a file-system.  If you
  want to do full file globbing use the File::Glob module instead.


pkgId: 514d105f69579981e52bd34e6705ff1e81331d3b055dd10bf403db743f269771
name: perl-Text-ParseWords
arch: noarch
version: 3.30
epoch: 0
release: 396.module+el8.1.0+2926+ce7246ad
summary: Parse text into an array of tokens or array of arrays
url: http://search.cpan.org/dist/Text-ParseWords/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Text-ParseWords-3.30-396.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Text-ParseWords-3.30-396.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  The nested_quotewords() and quotewords() functions accept a delimiter (which
  can be a regular expression) and a list of lines and then breaks those lines
  up into a list of words ignoring delimiters that appear inside quotes.
  quotewords() returns all of the tokens in a single long list, while
  nested_quotewords() returns a list of token lists corresponding to the
  elements of @lines. parse_line() does tokenizing on a single string. The
  quotewords() functions simply call &parse_line(), so if you're only splitting
  one line you can call parse_line() directly and save a function call.


pkgId: f116a6c054a236e579b3cb9f10eeb6a27184a14d05741dca189a158f420b9cfd
name: perl-Text-Soundex
arch: x86_64
version: 3.05
epoch: 0
release: 8.el8
summary: Implementation of the soundex algorithm
url: http://search.cpan.org/dist/Text-Soundex/
rpm_license: (Copyright only) and (GPL+ or Artistic)
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Text-Soundex-3.05-8.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Text-Soundex-3.05-8.el8.x86_64.rpm
checksum_type: sha256
description:
  Soundex is a phonetic algorithm for indexing names by sound, as pronounced in
  English. This module implements the original soundex algorithm developed by
  Robert Russell and Margaret Odell, as well as a variation called "American
  Soundex".


pkgId: 1c2700bb56e43423bac526c0ee1de2292f6f7ec98c74e3e4aed1d6fb75ad9cec
name: perl-Text-Tabs+Wrap
arch: noarch
version: 2013.0523
epoch: 0
release: 396.module+el8.1.0+2926+ce7246ad
summary: Expand tabs and do simple line wrapping
url: http://search.cpan.org/dist/Text-Tabs%2BWrap/
rpm_license: TTWL
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Text-Tabs+Wrap-2013.0523-396.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Text-Tabs+Wrap-2013.0523-396.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  Text::Tabs performs the same job that the UNIX expand(1) and unexpand(1)
  commands do: adding or removing tabs from a document.

  Text::Wrap::wrap() will reformat lines into paragraphs. All it does is break
  up long lines, it will not join short lines together.


pkgId: 8bcebf0c0e673905213612397ab97c9591496d1888449cf2e2038d269547903d
name: perl-Text-Template
arch: noarch
version: 1.47
epoch: 0
release: 2.module+el8.1.0+2926+ce7246ad
summary: Expand template text with embedded Perl
url: http://search.cpan.org/dist/Text-Template/
rpm_license: (GPL+ or Artistic) and (GPLv2+ or Artistic)
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Text-Template-1.47-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Text-Template-1.47-2.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This is a library for generating form letters, building HTML pages, or
  filling in templates generally.  A 'template' is a piece of text that
  has little Perl programs embedded in it here and there.  When you
  'fill in' a template, you evaluate the little programs and replace
  them with their values.


pkgId: 1233732bf32ac217d82e06e858f1059ac0393084d9f98867be2cee309628aeb0
name: perl-Text-Unidecode
arch: noarch
version: 1.30
epoch: 0
release: 5.el8
summary: US-ASCII transliterations of Unicode text
url: http://search.cpan.org/dist/Text-Unidecode/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Text-Unidecode-1.30-5.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Text-Unidecode-1.30-5.el8.noarch.rpm
checksum_type: sha256
description:
  Text::Unidecode provides a function, `unidecode(...)' that takes
  Unicode data and tries to represent it in US-ASCII characters (i.e.,
  the universally displayable characters between 0x00 and 0x7F). The
  representation is almost always an attempt at *transliteration* -- i.e.,
  conveying, in Roman letters, the pronunciation expressed by the text in
  some other writing system.


pkgId: 3a099b30ab57b6f744411042e505ef7ac94d4277a2aafa7912d974c74c65555d
name: perl-Thread
arch: noarch
version: 3.05
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Manipulate threads in Perl (for old code only)
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Thread-3.05-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This Thread module served as the front end to the old-style thread model,
  called 5005threads, that has been removed in version 5.10.

  For old code and interim backwards compatibility, the Thread module has been
  reworked to function as a front end for the new interpreter threads (ithreads)
  model. However, some previous functionality is not available. Further, the
  data sharing models between the two thread models are completely different,
  and anything to do with data sharing has to be thought differently.

  You are strongly encouraged to migrate any existing threaded code to the new
  model (i.e., use the threads and threads::shared modules) as soon as possible.


pkgId: 1b66a4ee836489e0ed587a175d3088a32e944458329d94d7e26c992e3e48b4b8
name: perl-Thread-Semaphore
arch: noarch
version: 2.13
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Thread-safe semaphores
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Thread-Semaphore-2.13-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  Semaphores provide a mechanism to regulate access to resources. Unlike locks,
  semaphores aren't tied to particular scalars, and so may be used to control
  access to anything you care to use them for. Semaphores don't limit their
  values to zero and one, so they can be used to control access to some resource
  that there may be more than one of (e.g., file handles). Increment and
  decrement amounts aren't fixed at one either, so threads can reserve or return
  multiple resources at once.


pkgId: bd9bda5346c2dd5a7010551b07a0147b49779dbac69eddd14cd924ed5f033384
name: perl-Tie-File
arch: noarch
version: 1.06
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Access the lines of a disk file via a Perl array
url: https://www.perl.org/
rpm_license: GPLv2+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Tie-File-1.06-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  Tie::File represents a regular text file as a Perl array. Each element in the
  array corresponds to a record in the file. The first line of the file is
  element 0 of the array; the second line is element 1, and so on.  The file is
  not loaded into memory, so this will work even for gigantic files.  Changes to
  the array are reflected in the file immediately.


pkgId: 95d29eb9b71d3d698328b4c1e8d817c0c8a921cbcafd20a76aead2062d5fe7b4
name: perl-Tie-Memoize
arch: noarch
version: 1.1
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Add data to a hash when needed
url: https://www.perl.org/
rpm_license: GPLv2+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Tie-Memoize-1.1-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This package allows a tied hash to load its values automatically on the first
  access, and to use the cached value on the following accesses.


pkgId: 169a9411e642c6841b504222b062d720246bf6d5413c8539e187b882eb2aac88
name: perl-Tie-RefHash
arch: noarch
version: 1.39
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Use references as hash keys
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Tie-RefHash-1.39-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This module provides the ability to use references as hash keys if you first
  "tie" the hash variable to this module. Normally, only the keys of the tied
  hash itself are preserved as references; to use references as keys in
  hashes-of-hashes, use Tie::RefHash::Nestable, included as part of
  Tie::RefHash.


pkgId: 35d9453b52c262b346cf495898a6fd7a4cfd3ffe1793226ade21f39d742f9e98
name: perl-Time
arch: noarch
version: 1.03
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: By-name interface to Perl built-in time functions
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Time-1.03-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This package provides an object-oriented interface to Perl built-in gmtime()
  and localtime () functions.


pkgId: 8d4e2e9254b0f64723b575396cb2af0d10bfe4ae27719fa49ab6fcf503f3a87b
name: perl-Time-HiRes
arch: x86_64
version: 1.9753
epoch: 0
release: 2.module+el8.1.0+2926+ce7246ad
summary: High resolution alarm, sleep, gettimeofday, interval timers
url: http://search.cpan.org/dist/Time-HiRes/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Time-HiRes-1.9753-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Time-HiRes-1.9753-2.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  The Time::HiRes module implements a Perl interface to the usleep, nanosleep,
  ualarm, gettimeofday, and setitimer/getitimer system calls, in other words,
  high resolution time and timers.


pkgId: cc380b18b4f18549717237ad55c9402225f80259d28dc15bd9d2fb1e3eb5e0dd
name: perl-Time-Local
arch: noarch
version: 1.280
epoch: 1
release: 2.module+el8.1.0+2926+ce7246ad
summary: Efficiently compute time from local and GMT time
url: https://metacpan.org/release/Time-Local
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Time-Local-1.280-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Time-Local-1.280-2.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This module provides functions that are the inverse of built-in perl functions
  localtime() and gmtime(). They accept a date as a six-element array, and
  return the corresponding time(2) value in seconds since the system epoch
  (Midnight, January 1, 1970 GMT on Unix, for example). This value can be
  positive or negative, though POSIX only requires support for positive values,
  so dates before the system's epoch may not work on all operating systems.


pkgId: c00d178ac89b6a27e22990690514da99d8788cca3772d8c79c8ce70ef4440dda
name: perl-Time-Piece
arch: x86_64
version: 1.31
epoch: 0
release: 404.module+el8.1.0+2926+ce7246ad
summary: Time objects from localtime and gmtime
url: http://www.perl.org/
rpm_license: (GPL+ or Artistic) and BSD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Time-Piece-1.31-404.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  The Time::Piece module replaces the standard localtime and gmtime functions
  with implementations that return objects.  It does so in a backwards compatible
  manner, so that using localtime or gmtime as documented in perlfunc still
  behave as expected.


pkgId: 5919be426d6b021513c53365b9e3fb14250c4044b878bd9e6c760ddb2de657ff
name: perl-TimeDate
arch: noarch
version: 2.30
epoch: 1
release: 15.module+el8.3.0+6498+31ea7642
summary: A Perl module for time and date manipulation
url: http://search.cpan.org/dist/TimeDate/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: perl-TimeDate-2.30-15.module+el8.3.0+6498+31ea7642.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-TimeDate-2.30-15.module+el8.3.0+6498+31ea7642.noarch.rpm
checksum_type: sha256
description:
  This module includes a number of smaller modules suited for
  manipulation of time and date strings with Perl. In particular, the
  Date::Format and Date::Parse modules can display and read times and
  dates in various formats, providing a more reliable interface to
  textual representations of points in time.


pkgId: 102e0ae4dcbb7b8e4673b84ef37f9b1e19debb77bf961137ff72ea935855946b
name: perl-Tk
arch: x86_64
version: 804.034
epoch: 0
release: 2.el8
summary: Perl Graphical User Interface ToolKit
url: http://search.cpan.org/dist/Tk/
rpm_license: (GPL+ or Artistic) and SWL
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Tk-804.034-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Tk-804.034-2.el8.x86_64.rpm
checksum_type: sha256
description:
  This a re-port of a perl interface to Tk8.4.
  C code is derived from Tcl/Tk8.4.5.
  It also includes all the C code parts of Tix8.1.4 from SourceForge.
  The perl code corresponding to Tix's Tcl code is not fully implemented.

  Perl API is essentially the same as Tk800 series Tk800.025 but has not
  been verified as compliant. There ARE differences see pod/804delta.pod.


pkgId: 9763b6c2b084cb55634804711089e16f232bbc8a8e79c9f51f2e77dd037e09f4
name: perl-Try-Tiny
arch: noarch
version: 0.30
epoch: 0
release: 2.el8
summary: Minimal try/catch with proper localization of $@
url: http://search.cpan.org/dist/Try-Tiny
rpm_license: MIT
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Try-Tiny-0.30-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Try-Tiny-0.30-2.el8.noarch.rpm
checksum_type: sha256
description:
  This module provides bare bones try/catch statements that are designed to
  minimize common mistakes with eval blocks, and NOTHING else.

  This is unlike TryCatch, which provides a nice syntax and avoids adding
  another call stack layer, and supports calling return from the try block to
  return from the parent subroutine. These extra features come at a cost of a
  few dependencies, namely Devel::Declare and Scope::Upper that are occasionally
  problematic, and the additional catch filtering uses Moose type constraints,
  which may not be desirable either.


pkgId: 66598a603f81bf5eedfaf0b30b9af68731b829ff7f0b7c4f1c2c17664cd39131
name: perl-URI
arch: noarch
version: 1.71
epoch: 0
release: 7.module+el8.1.0+2926+ce7246ad
summary: A Perl module implementing URI parsing and manipulation
url: http://search.cpan.org/dist/URI/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-URI-1.71-7.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-URI-1.71-7.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This module implements the URI class. Objects of this class represent
  "Uniform Resource Identifier references" as specified in RFC 2396 (and
  updated by RFC 2732).


pkgId: 6d4844715f3fe29c9a574a12ea97fd76585d2d3709a23e1870e6d45b6f8ff46b
name: perl-Unicode-Collate
arch: x86_64
version: 1.20
epoch: 0
release: 2.module+el8.1.0+2926+ce7246ad
summary: Unicode Collation Algorithm
url: http://search.cpan.org/dist/Unicode-Collate/
rpm_license: (GPL+ or Artistic) and Unicode
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Unicode-Collate-1.20-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Unicode-Collate-1.20-2.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  This package is Perl implementation of Unicode Technical Standard #10 (Unicode
  Collation Algorithm).


pkgId: 9821bdf0ae3eae6ebb4504e81341d382687cd94112429203ff8d1986b07879a8
name: perl-Unicode-Normalize
arch: x86_64
version: 1.25
epoch: 0
release: 1001.module+el8.1.0+2926+ce7246ad
summary: Unicode Normalization Forms
url: http://search.cpan.org/dist/Unicode-Normalize/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Unicode-Normalize-1.25-1001.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Unicode-Normalize-1.25-1001.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  This package provides Perl functions that can convert strings into various
  Unicode normalization forms as defined in Unicode Standard Annex #15.


pkgId: aaf7cfc5a710c220633e6fda202079d9b870ec05e817e8786f4ba7fe10f4cff2
name: perl-Unicode-UCD
arch: noarch
version: 0.75
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Unicode character database
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Unicode-UCD-0.75-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  The Unicode::UCD module offers a series of functions that provide a simple
  interface to the Unicode Character Database.


pkgId: 49137e192dc9abd9d6f971de8871674cbc970e831754ff1970a6bff152559cc2
name: perl-Unix-Syslog
arch: x86_64
version: 1.1
epoch: 0
release: 29.el8
summary: Perl interface to the UNIX syslog(3) calls
url: http://search.cpan.org/dist/Unix-Syslog/
rpm_license: Artistic 2.0
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Unix-Syslog-1.1-29.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-Unix-Syslog-1.1-29.el8.x86_64.rpm
checksum_type: sha256
description:
  This module provides an interface to the system logger syslogd(8) via
  Perl's XSUBs. The implementation attempts to resemble the native
  libc-functions of your system, so that anyone being familiar with
  syslog.h should be able to use this module right away.


pkgId: 6198e9ca87c3a32186ddc6eac171a1f1c0b2deb358091ee434e079f72d76c9bd
name: perl-User-pwent
arch: noarch
version: 1.03
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: By-name interface to Perl built-in user name resolver
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-User-pwent-1.03-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This package provides an object-oriented interface to Perl build-in getgr*()
  and getpw*() functions.


pkgId: 5a7c907b8537eeb090d9f5b3fa8a0e4622cc1bcfafde46c8a72a98cadf4d6f59
name: perl-WWW-RobotRules
arch: noarch
version: 6.02
epoch: 0
release: 18.el8
summary: Database of robots.txt-derived permissions
url: http://search.cpan.org/dist/WWW-RobotRules/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: i686.ab.2
rpm_sourcerpm: perl-WWW-RobotRules-6.02-18.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-WWW-RobotRules-6.02-18.el8.noarch.rpm
checksum_type: sha256
description:
  This module parses /robots.txt files as specified in "A Standard for Robot
  Exclusion", at <http://www.robotstxt.org/wc/norobots.html>. Webmasters can
  use the /robots.txt file to forbid conforming robots from accessing parts
  of their web site.


pkgId: 42337b5d081f39d3bc035863ddd3ca80a726d3f408a1302c11a874f03f33c28d
name: perl-XML-Catalog
arch: noarch
version: 1.03
epoch: 0
release: 11.el8
summary: Resolve public identifiers and remap system identifiers
url: http://search.cpan.org/dist/XML-Catalog/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-XML-Catalog-1.03-11.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-XML-Catalog-1.03-11.el8.noarch.rpm
checksum_type: sha256
description:
  This module implements draft 0.4 of John Cowan's XML Catalog (formerly
  known as XCatalog) see
  (<https://www.oasis-open.org/committees/entity/specs/cs-entity-xml-catalogs-1.0.html>)
  Catalogs may be written in either SOCAT or XML syntax. XML::Catalog will
  assume SOCAT syntax if the catalog is not in well-formed XML syntax.


pkgId: 53dbfe6b74260c4166d5385969d0baa7640ced1244e22c48d05b08b32a052e87
name: perl-XML-LibXML
arch: x86_64
version: 2.0132
epoch: 1
release: 2.el8
summary: Perl interface to the libxml2 library
url: http://search.cpan.org/dist/XML-LibXML/
rpm_license: (GPL+ or Artistic) and MIT
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-XML-LibXML-2.0132-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-XML-LibXML-2.0132-2.el8.x86_64.rpm
checksum_type: sha256
description:
  This module implements a Perl interface to the GNOME libxml2 library
  which provides interfaces for parsing and manipulating XML files. This
  module allows Perl programmers to make use of the highly capable
  validating XML parser and the high performance DOM implementation.


pkgId: 5744191bb2bea6f9e3a2acc32dc7dcb62be3da20cdbfb9878ac82c0b34d9a29c
name: perl-XML-NamespaceSupport
arch: noarch
version: 1.12
epoch: 0
release: 4.el8
summary: A simple generic name space support class
url: http://search.cpan.org/dist/XML-NamespaceSupport/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-XML-NamespaceSupport-1.12-4.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-XML-NamespaceSupport-1.12-4.el8.noarch.rpm
checksum_type: sha256
description:
  This module offers a simple to process name-spaced XML names (unames) from
  within any application that may need them. It also helps maintain a prefix
  to name space URI map, and provides a number of basic checks.


pkgId: 36a5696fa1b79e0a12f76d0c28048b82e66efa86f524c1e86e37c4bb3ed91b1f
name: perl-XML-Parser
arch: x86_64
version: 2.44
epoch: 0
release: 11.el8
summary: Perl module for parsing XML documents
url: http://search.cpan.org/dist/XML-Parser/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-XML-Parser-2.44-11.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-XML-Parser-2.44-11.el8.x86_64.rpm
checksum_type: sha256
description:
  This module provides ways to parse XML documents. It is built on top
  of XML::Parser::Expat, which is a lower level interface to James
  Clark's expat library. Each call to one of the parsing methods creates
  a new instance of XML::Parser::Expat which is then used to parse the
  document. Expat options may be provided when the XML::Parser object is
  created. These options are then passed on to the Expat object on each
  parse call. They can also be given as extra arguments to the parse
  methods, in which case they override options given at XML::Parser
  creation time.


pkgId: 65fb7b5555ce5d51fed9ec17517010b830bbb1ffff22e18274f1d51a3b99bcdb
name: perl-XML-SAX
arch: noarch
version: 1.00
epoch: 0
release: 1.el8
summary: SAX parser access API for Perl
url: http://search.cpan.org/dist/XML-SAX/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-XML-SAX-1.00-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-XML-SAX-1.00-1.el8.noarch.rpm
checksum_type: sha256
description:
  XML::SAX consists of several framework classes for using and building
  Perl SAX2 XML parsers, filters, and drivers. It is designed around the
  need to be able to "plug in" different SAX parsers to an application
  without requiring programmer intervention. Those of you familiar with
  the DBI will be right at home. Some of the designs come from the Java
  JAXP specification (SAX part), only without the javaness.


pkgId: ed625640f90fd7282656c5e6fa1131ce4a167fb55f1c07c044b5b1c99c52d001
name: perl-XML-SAX-Base
arch: noarch
version: 1.09
epoch: 0
release: 4.el8
summary: Base class SAX drivers and filters
url: http://search.cpan.org/dist/XML-SAX-Base/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-XML-SAX-Base-1.09-4.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-XML-SAX-Base-1.09-4.el8.noarch.rpm
checksum_type: sha256
description:
  This module has a very simple task - to be a base class for Perl SAX drivers
  and filters. Its default behavior is to pass the input directly to the
  output unchanged. It can be useful to use this module as a base class so
  you don't have to, for example, implement the characters() callback.


pkgId: 0ab21d3b28ef1b9c7b4daee2f572d622f53ce5aae2f947fb697be3e092846854
name: perl-XML-Simple
arch: noarch
version: 2.25
epoch: 0
release: 1.el8
summary: Easy API to maintain XML in Perl
url: http://search.cpan.org/dist/XML-Simple/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-XML-Simple-2.25-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-XML-Simple-2.25-1.el8.noarch.rpm
checksum_type: sha256
description:
  The XML::Simple module provides a simple API layer on top of an
  underlying XML parsing module (either XML::Parser or one of the SAX2
  parser modules).


pkgId: 2840cc82500bc2aa5ec6f5804e5db3a4c130978f217125e2ebfe9bd6bf572d64
name: perl-XML-TokeParser
arch: noarch
version: 0.05
epoch: 0
release: 25.el8
summary: Simplified interface to XML::Parser
url: http://search.cpan.org/dist/XML-TokeParser/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-XML-TokeParser-0.05-25.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-XML-TokeParser-0.05-25.el8.noarch.rpm
checksum_type: sha256
description:
  XML::TokeParser provides a procedural ("pull mode") interface to
  XML::Parser in much the same way that Gisle Aas' HTML::TokeParser provides
  a procedural interface to HTML::Parser. XML::TokeParser splits its XML
  input up into "tokens," each corresponding to an XML::Parser event.


pkgId: bb55c8912c8134555e37db005e2636b7bb086a68492e85acf3e52de0cff31c09
name: perl-XML-XPath
arch: noarch
version: 1.42
epoch: 0
release: 3.el8
summary: XPath parser and evaluator for Perl
url: http://search.cpan.org/dist/XML-XPath/
rpm_license: Artistic 2.0 and (GPL+ or Artistic)
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-XML-XPath-1.42-3.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-XML-XPath-1.42-3.el8.noarch.rpm
checksum_type: sha256
description:
  This module aims to comply exactly to the XPath specification at
  http://www.w3.org/TR/xpath and yet allow extensions to be added in the
  form of functions. Modules such as XSLT and XPointer may need to do
  this as they support functionality beyond XPath.


pkgId: c977a5a71b1c99c5cd3b05b307f359f960b57042464cfcfb7b4ed951157d59f0
name: perl-YAML
arch: noarch
version: 1.24
epoch: 0
release: 3.module+el8.1.0+2934+4e5567df
summary: YAML Ain't Markup Language (tm)
url: http://search.cpan.org/dist/YAML/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-YAML-1.24-3.module+el8.1.0+2934+4e5567df.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-YAML-1.24-3.module+el8.1.0+2934+4e5567df.noarch.rpm
checksum_type: sha256
description:
  The YAML.pm module implements a YAML Loader and Dumper based on the
  YAML 1.0 specification. http://www.yaml.org/spec/
  YAML is a generic data serialization language that is optimized for
  human readability. It can be used to express the data structures of
  most modern programming languages, including Perl.
  For information on the YAML syntax, please refer to the YAML
  specification.


pkgId: fee60d900b7cc6f837169285f66630d48a0444d2dd1727c34a0edab8650e8a4d
name: perl-autodie
arch: noarch
version: 2.29
epoch: 0
release: 1001.module+el8.1.0+2926+ce7246ad
summary: Replace functions with ones that succeed or die
url: http://search.cpan.org/dist/autodie/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-autodie-2.29-1001.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-autodie-2.29-1001.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  The "autodie" and "Fatal" pragma provides a convenient way to replace
  functions that normally return false on failure with equivalents that throw an
  exception on failure.

  However "Fatal" has been obsoleted by the new autodie pragma. Please use
  autodie in preference to "Fatal".


pkgId: 8f975f36d354e9ab01a3acee0705edd9d1c27b9f3b0e6c0071cd2086ac8da39b
name: perl-autouse
arch: noarch
version: 1.11
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Postpone load of modules until a function is used
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-autouse-1.11-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  If a module is not loaded yet, then the autouse declaration declares functions
  in the current package. When these functions are called, they load the package
  and substitute themselves with the correct definitions.


pkgId: 3af764c3a8371ed3567f9a7287328fd2bfde1c7173eb0bb786e1c31eddbc54da
name: perl-base
arch: noarch
version: 2.27
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Establish an ISA relationship with base classes at compile time
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-base-2.27-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  "base" module allows you to both load one or more modules, while setting up
  inheritance from those modules at the same time.  Unless you are using the
  "fields" pragma, consider this module discouraged in favor of the
  lighter-weight "parent".


pkgId: c000df1589b1c72395bd15fd318d329ee7817c73ac118be1a1b94250b5bbfa73
name: perl-bignum
arch: noarch
version: 0.49
epoch: 0
release: 2.el8
summary: Transparent big number support for Perl
url: http://search.cpan.org/dist/bignum/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-bignum-0.49-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-bignum-0.49-2.el8.noarch.rpm
checksum_type: sha256
description:
  This package attempts to make it easier to write scripts that use BigInts and
  BigFloats in a transparent way.


pkgId: c02fe86d91d5b47a163a69565c06927c0e62b807659a525918c0200e64b3781a
name: perl-blib
arch: noarch
version: 1.07
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Use uninstalled version of a package
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-blib-1.07-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This module looks for MakeMaker-like "blib" directory structure starting in
  given or current directory and working back up to five levels of directories.
  It is intended for use on command line with -M option as a way of testing
  arbitrary scripts against an uninstalled version of a package.


pkgId: 94fc949d4692f06ad9b5ddf4a33e0b3d0663144583b81c633ba20323abac258c
name: perl-constant
arch: noarch
version: 1.33
epoch: 0
release: 1001.module+el8.1.0+2926+ce7246ad
summary: Perl pragma to declare constants
url: http://search.cpan.org/dist/constant/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-constant-1.33-1001.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-constant-1.33-1001.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This pragma allows you to declare constants at compile-time:

  use constant PI => 4 * atan2(1, 1);

  When you declare a constant such as "PI" using the method shown above,
  each machine your script runs upon can have as many digits of accuracy
  as it can use. Also, your program will be easier to read, more likely
  to be maintained (and maintained correctly), and far less likely to
  send a space probe to the wrong planet because nobody noticed the one
  equation in which you wrote 3.14195.

  When a constant is used in an expression, Perl replaces it with its
  value at compile time, and may then optimize the expression further.
  In particular, any code in an "if (CONSTANT)" block will be optimized
  away if the constant is false.


pkgId: 236e6992710610ad9fb734fad050248b0929080bcc3bb18e5e294888a293c464
name: perl-core
arch: x86_64
version: 5.24.4
epoch: 0
release: 404.module+el8.1.0+2926+ce7246ad
summary: Base perl metapackage
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-core-5.24.4-404.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  A metapackage which requires all of the perl bits and modules in the upstream
  tarball from perl.org.


pkgId: a4dce690f3532a2ee78bca70357fd62d07127e9085f1eb9cd0397a2154ef723a
name: perl-debugger
arch: noarch
version: 1.56
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Perl debugger
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-debugger-1.56-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This is the perl debugger. It is loaded automatically by Perl when you invoke
  a script with "perl -d". There is also "DB" module contained for
  a programmatic interface to the debugging API.


pkgId: 6f7d428f0059558a870ec9a064b44f428eb55ff03ad5a00faa8b9bdd6d8e7278
name: perl-deprecate
arch: noarch
version: 0.04
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Perl pragma for deprecating the inclusion of a module in core
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-deprecate-0.04-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  "deprecate" pragma simplifies the maintenance of dual-life modules that will no
  longer be included in the Perl core in a future Perl release, but are
  still included currently. The purpose of the pragma is to alert users to the
  status of such a module by issuing a warning that encourages them to install
  the module from CPAN, so that a future upgrade to a perl which omits the
  module will not break their code.


pkgId: 8b5ab3e54de553c4a37c9b71937e5c85028d775db38699f8143a59ed494e3519
name: perl-devel
arch: x86_64
version: 5.24.4
epoch: 4
release: 404.module+el8.1.0+2926+ce7246ad
summary: Header #files for use in perl development
url: http://www.perl.org/
rpm_license: (GPL+ or Artistic) and UCD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-devel-5.24.4-404.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  This package contains header files and development modules.
  Most perl packages will need to install perl-devel to build.


pkgId: 8baef2ed5ab80fc9279491ffe4e45a06ba86cba9fab0f49592ee36298c98b6ff
name: perl-diagnostics
arch: noarch
version: 1.37
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Produce verbose warning diagnostics
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-diagnostics-1.37-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  The diagnostics module extends the terse diagnostics normally emitted by both
  the perl compiler and the perl interpreter (from running perl with a -w switch
  or "use warnings"), augmenting them with the more explicative and endearing
  descriptions found in perldiag. splain tool explains perl messages found on
  standard input.


pkgId: f4fff695f0a32463d2707989e7557011ccaf502854c075f8deeaa75a9af2b4c1
name: perl-encoding
arch: x86_64
version: 2.19
epoch: 4
release: 7.module+el8.1.0+2926+ce7246ad
summary: Write your Perl script in non-ASCII or non-UTF-8
url: http://search.cpan.org/dist/Encode/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-Encode-2.88-7.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-encoding-2.19-7.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  With the encoding pragma, you can write your Perl script in any encoding you
  like (so long as the Encode module supports it) and still enjoy Unicode
  support.

  However, this encoding module is deprecated under perl 5.18. It uses
  a mechanism provided by perl that is deprecated under 5.18 and higher, and may
  be removed in a future version.

  The easiest and the best alternative is to write your script in UTF-8.


pkgId: 775e8efdf1681511a30f01b9e4a4ee7e98513f782d67683f4b9ec0888219b1f3
name: perl-encoding-warnings
arch: noarch
version: 0.13
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Warn on implicit encoding conversions
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-encoding-warnings-0.13-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  As of Perl 5.26.0, this module has no effect. The internal Perl feature that
  was used to implement this module has been removed.  Hence, if you load this
  module on Perl 5.26.0, you will get one warning that the module is no longer
  supported; and the module will do nothing thereafter.


pkgId: 99effc992cc45807c76b3f4f544c0e3790ef540d7e5ccd88522d300962388c2d
name: perl-filetest
arch: noarch
version: 1.03
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Perl pragma to control the filetest permission operators
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-filetest-1.03-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  The default behavior of file test operators (e.g. "-r") is to use the simple
  mode bits as returned by the stat() family of system calls. However, many
  operating systems have additional features to define more complex access
  rights, for example ACLs (Access Control Lists). For such environments, "use
  filetest" may help the permission operators to return results more consistent
  with other tools.


pkgId: 3a6e1d7873caec18abc9b86142966f1502def457b048e123efcb1f7bce22b43a
name: perl-generators
arch: noarch
version: 1.10
epoch: 0
release: 10.module+el8.1.0+3267+b2b60bb5
summary: RPM Perl dependencies generators
url: http://jplesnik.fedorapeople.org/generators
rpm_license: GPL+
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-generators-1.10-10.module+el8.1.0+3267+b2b60bb5.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-generators-1.10-10.module+el8.1.0+3267+b2b60bb5.noarch.rpm
checksum_type: sha256
description:
  This package provides RPM Perl dependencies generators which are used for
  getting provides and requires from Perl binaries and modules.


pkgId: c82d316c8375b5b5173edf4c61dda40ee6530d17449141b8a650a095adee3fac
name: perl-homedir
arch: noarch
version: 2.000023
epoch: 0
release: 2.module+el8.1.0+2926+ce7246ad
summary: Per-user Perl local::lib setup
url: http://search.cpan.org/dist/local-lib
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-local-lib-2.000023-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-homedir-2.000023-2.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  perl-homedir configures the system to automatically create a ~/perl5
  directory in each user's $HOME on user login.  This allows each user to
  install CPAN packages via the CPAN to their $HOME, with no additional
  configuration or privileges, and without installing them system-wide.

  If you want your users to be able to install and use their own Perl modules,
  install this package.


pkgId: 3df79ea0251157ca76bccaeec033ebec1b33c2e219ee480b44cdb8337f5d40d9
name: perl-inc-latest
arch: noarch
version: 0.500
epoch: 2
release: 10.module+el8.1.0+2926+ce7246ad
summary: Use modules bundled in inc/ if they are newer than installed ones
url: http://search.cpan.org/dist/inc-latest/
rpm_license: ASL 2.0
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-inc-latest-0.500-10.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-inc-latest-0.500-10.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  The inc::latest module helps bootstrap configure-time dependencies for CPAN
  distributions. These dependencies get bundled into the inc directory within
  a distribution and are used by Makefile.PL or Build.PL.


pkgId: 45aed60861de6bfe325da730f6dd95486376d68b772b31959cb0cbe9f8a64606
name: perl-interpreter
arch: x86_64
version: 5.24.4
epoch: 4
release: 404.module+el8.1.0+2926+ce7246ad
summary: Standalone executable Perl interpreter
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-interpreter-5.24.4-404.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  This is a dummy package to improve a compatibility with future Perls that will use
  this package to deliver /usr/bin/perl Perl interpreter.


pkgId: 2f316572ae3e14859a9810f650b0b9bd912a8347223a711f6677737165b7f071
name: perl-interpreter
arch: x86_64
version: 5.30.1
epoch: 4
release: 451.module+el8.3.0+6961+31ca2e7a
summary: Standalone executable Perl interpreter
url: https://www.perl.org/
rpm_license: (GPL+ or Artistic) and (GPLv2+ or Artistic) and BSD and Public Domain and UCD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: perl-5.30.1-451.module+el8.3.0+6961+31ca2e7a.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-interpreter-5.30.1-451.module+el8.3.0+6961+31ca2e7a.x86_64.rpm
checksum_type: sha256
description:
  This is a Perl interpreter as a standalone executable /usr/bin/perl
  required for handling Perl scripts. It does not provide all the other Perl
  modules or tools.

  Install this package if you want to program in Perl or enable your system to
  handle Perl scripts with /usr/bin/perl interpreter.

  If your script requires some Perl modules, you can install them with
  "perl(MODULE)" where "MODULE" is a name of required module. E.g. install
  "perl(Test::More)" to make Test::More Perl module available.

  If you need all the Perl modules that come with upstream Perl sources, so
  called core modules, install perl package.

  If you only need perl run-time as a shared library, i.e. Perl interpreter
  embedded into another application, the only essential package is perl-libs.

  Perl header files can be found in perl-devel package.

  Perl utils like "splain" or "perlbug" can be found in perl-utils package.


pkgId: ce89370dbd669d6b1117327ca713cf4cea5cd09818c24c1c815ab63fb64f44fb
name: perl-interpreter
arch: x86_64
version: 5.32.1
epoch: 4
release: 471.module+el8.6.0+13324+628a2397
summary: Standalone executable Perl interpreter
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-interpreter-5.32.1-471.module+el8.6.0+13324+628a2397.x86_64.rpm
checksum_type: sha256
description:
  This is a Perl interpreter as a standalone executable /usr/bin/perl
  required for handling Perl scripts. It does not provide all the other Perl
  modules or tools.

  Install this package if you want to program in Perl or enable your system to
  handle Perl scripts with /usr/bin/perl interpreter.

  If your script requires some Perl modules, you can install them with
  "perl(MODULE)" where "MODULE" is a name of required module. E.g. install
  "perl(Test::More)" to make Test::More Perl module available.

  If you need all the Perl modules that come with upstream Perl sources, so
  called core modules, install perl package.

  If you only need perl run-time as a shared library, i.e. Perl interpreter
  embedded into another application, the only essential package is perl-libs.

  Perl header files can be found in perl-devel package.

  Perl utils like "h2ph" or "perlbug" can be found in perl-utils package.

  Perl debugger, usually invoked with "perl -d", is available in perl-debugger
  package.


pkgId: 4420308e5eb07832c84b111eee5c5af90128b78380c00d0805e71c0a603ac0d2
name: perl-less
arch: noarch
version: 0.03
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Perl pragma to request less of something
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-less-0.03-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  "use less ...;" is a Perl user-pragma. If you're very lucky some code you're
  using will know that you asked for less CPU usage or RAM or fat or... we just
  can't know.


pkgId: 897e57b49bf68cca31aaa5246190074cbf0495bde549c6d3c311ec8d2b693ced
name: perl-libintl-perl
arch: x86_64
version: 1.29
epoch: 0
release: 2.el8
summary: Internationalization library for Perl, compatible with gettext
url: http://search.cpan.org/dist/libintl-perl/
rpm_license: GPLv3+ and LGPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-libintl-perl-1.29-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-libintl-perl-1.29-2.el8.x86_64.rpm
checksum_type: sha256
description:
  The package libintl-perl is an internationalization library for Perl that
  aims to be compatible with the Uniforum message translations system as
  implemented for example in GNU gettext.


pkgId: e41f2571b681d2e835ca3a2f6534725c7b2b9b1393e2b45be4e9b584e1570e94
name: perl-libnet
arch: noarch
version: 3.11
epoch: 0
release: 3.el8
summary: Perl clients for various network protocols
url: http://search.cpan.org/dist/libnet/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-libnet-3.11-3.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-libnet-3.11-3.el8.noarch.rpm
checksum_type: sha256
description:
  This is a collection of Perl modules which provides a simple and
  consistent programming interface (API) to the client side of various
  protocols used in the internet community.


pkgId: 273a4e46ca5b3faa35d243828d88bf2233f6348caaadf2cc31aef4aee44b170a
name: perl-libwww-perl
arch: noarch
version: 6.34
epoch: 0
release: 1.module+el8.3.0+6498+31ea7642
summary: A Perl interface to the World-Wide Web
url: https://metacpan.org/release/libwww-perl
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: perl-libwww-perl-6.34-1.module+el8.3.0+6498+31ea7642.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-libwww-perl-6.34-1.module+el8.3.0+6498+31ea7642.noarch.rpm
checksum_type: sha256
description:
  The libwww-perl collection is a set of Perl modules which provides a simple and
  consistent application programming interface to the World-Wide Web.  The main
  focus of the library is to provide classes and functions that allow you to
  write WWW clients. The library also contain modules that are of more general
  use and even classes that help you implement simple HTTP servers.


pkgId: 4096de13a3f1a4e3515c44c7169c6e92966b12eb58bc2591899e3399d63eafb5
name: perl-libxml-perl
arch: noarch
version: 0.08
epoch: 0
release: 33.el8
summary: A collection of Perl modules for working with XML
url: http://search.cpan.org/dist/libxml-perl/
rpm_license: (GPL+ or Artistic) and Public Domain
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-libxml-perl-0.08-33.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-libxml-perl-0.08-33.el8.noarch.rpm
checksum_type: sha256
description:
  libxml-perl is a collection of smaller Perl modules, scripts, and
  documents for working with XML in Perl.  libxml-perl software works in
  combination with XML::Parser, PerlSAX, XML::DOM, XML::Grove and
  others.


pkgId: 3c34b4f84509bdaa36ba5720346ac0c2d971a18fb895e526df9236c7c618f7bd
name: perl-local-lib
arch: noarch
version: 2.000023
epoch: 0
release: 2.module+el8.1.0+2926+ce7246ad
summary: Create and use a local lib/ for perl modules
url: http://search.cpan.org/dist/local-lib
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-local-lib-2.000023-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-local-lib-2.000023-2.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This module provides a quick, convenient way of bootstrapping a user-
  local Perl module library located within the user's home directory. It
  also constructs and prints out for the user the list of environment
  variables using the syntax appropriate for the user's current shell (as
  specified by the 'SHELL' environment variable), suitable for directly
  adding to one's shell configuration file.

  More generally, local::lib allows for the bootstrapping and usage of a
  directory containing Perl modules outside of Perl's '@INC'. This makes
  it easier to ship an application with an app-specific copy of a Perl module,
  or collection of modules. Useful in cases like when an upstream maintainer
  hasn't applied a patch to a module of theirs that you need for your
  application.


pkgId: efb807abcaec1c1ddde1b24488f6f748da1c4669b27dabf23bee199a171d7bf0
name: perl-locale
arch: noarch
version: 1.09
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Pragma to use or avoid POSIX locales for built-in operations
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-locale-1.09-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This pragma tells the compiler to enable (or disable) the use of POSIX locales
  for built-in operations (for example, LC_CTYPE for regular expressions,
  LC_COLLATE for string comparison, and LC_NUMERIC for number formatting). Each
  "use locale" or "no locale" affects statements to the end of the enclosing
  block.


pkgId: b1bf681980cdceee260ca098d07024445ee81a4b2d653350063b110857d2b59a
name: perl-macros
arch: x86_64
version: 5.24.4
epoch: 4
release: 404.module+el8.1.0+2926+ce7246ad
summary: Macros for rpmbuild
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-macros-5.24.4-404.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  Macros for rpmbuild are needed during build of srpm in koji. This
  sub-package must be installed into buildroot, so it will be needed
  by perl. Perl is needed because of git.


pkgId: 0f2b3f6bd3e96c2f52c73a6f8e57f1890fba27f74e9634890cbcf604bd199134
name: perl-meta-notation
arch: noarch
version: 5.32.1
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Change nonprintable characters below 0x100 into printables
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-meta-notation-5.32.1-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  Returns a copy of the input string with the nonprintable characters below
  0x100 changed into printables. Any ASCII printables or above 0xFF are
  unchanged.


pkgId: 079ed9bfa61f9497c291e33b3dd81f99b12d89bad4e565ad212fc4578937d460
name: perl-mro
arch: x86_64
version: 1.23
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Method resolution order
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-mro-1.23-471.module+el8.6.0+13324+628a2397.x86_64.rpm
checksum_type: sha256
description:
  The "mro" name space provides several utilities for dealing with method
  resolution order and method caching in general.


pkgId: 8fbbbee2993b456ee142a1fed1caddec9f89b9639010023faf9eb857cb9d6281
name: perl-open
arch: noarch
version: 1.10
epoch: 0
release: 404.module+el8.1.0+2926+ce7246ad
summary: Perl pragma to set default PerlIO layers for input and output
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-open-1.10-404.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  The "open" pragma serves as one of the interfaces to declare default "layers"
  (also known as "disciplines") for all I/O.


pkgId: 5a5398a17ece853568a2839bc005766a9f33757d26e11fdd8e31a412553d30f4
name: perl-overload
arch: noarch
version: 1.31
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Overloading Perl operations
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-overload-1.31-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  The "overload" pragma allows overloading of Perl operators for a class. To
  overload built-in functions, see "Overriding Built-in Functions" in perlsub
  POD instead.


pkgId: b3b344026d9650a755ad16c2dbae9c20e7b5574c1f85022cd3a53c89676f3250
name: perl-parent
arch: noarch
version: 0.237
epoch: 1
release: 2.module+el8.1.0+2926+ce7246ad
summary: Establish an ISA relationship with base classes at compile time
url: https://metacpan.org/release/parent
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-parent-0.237-2.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-parent-0.237-2.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  Allows you to both load one or more modules, while setting up inheritance
  from those modules at the same time. Mostly similar in effect to:

  	package Baz;

  	BEGIN {
  		require Foo;
  		require Bar;

  		push @ISA, qw(Foo Bar);
  	}


pkgId: 93bc1f9dfc7f8a4613b2ae9accb61180a7f9576d5a3eca39934fba8cf63bbd1e
name: perl-perlfaq
arch: noarch
version: 5.20180605
epoch: 0
release: 1.el8
summary: Frequently asked questions about Perl
url: https://metacpan.org/release/perlfaq
rpm_license: (GPL+ or Artistic) and Public Domain
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-perlfaq-5.20180605-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-perlfaq-5.20180605-1.el8.noarch.rpm
checksum_type: sha256
description:
  The perlfaq comprises several documents that answer the most commonly asked
  questions about Perl and Perl programming.


pkgId: 23f640dbb74566ec9e17f985b5adeadcac4d411e3ae7be7142132c658f3e8547
name: perl-ph
arch: x86_64
version: 5.32.1
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Selected system header files converted to Perl headers
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-ph-5.32.1-471.module+el8.6.0+13324+628a2397.x86_64.rpm
checksum_type: sha256
description:
  Contemporary Perl still refers to some Perl header (ph) files although it does
  not build them anymore. This is a prebuilt collection of the referred files.
  If you miss other ones, you can generate them with h2ph tool from perl-utils
  package.


pkgId: 1256c66c44c0636ca701d3df4c4139427d9a0adb375461d9918feda0cbbdd673
name: perl-podlators
arch: noarch
version: 4.09
epoch: 0
release: 4.module+el8.1.0+2926+ce7246ad
summary: Format POD source into various output formats
url: http://search.cpan.org/dist/podlators/
rpm_license: (GPL+ or Artistic) and MIT
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-podlators-4.09-4.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-podlators-4.09-4.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  This package contains Pod::Man and Pod::Text modules which convert POD input
  to *roff source output, suitable for man pages, or plain text.  It also
  includes several sub-classes of Pod::Text for formatted output to terminals
  with various capabilities.


pkgId: 2400d2671a04baf2ad04c5dd3b437791f5b2083f20a0d1657127f8215f5884fc
name: perl-srpm-macros
arch: noarch
version: 1
epoch: 0
release: 25.el8
summary: RPM macros for building Perl source package from source repository
rpm_license: GPLv3+
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-srpm-macros-1-25.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-srpm-macros-1-25.el8.noarch.rpm
checksum_type: sha256
description:
  These RPM macros are used for building Perl source packages from source
  repositories. They influence build-requires set into the source package.


pkgId: 5df28974835e830411d5ed499111499211e5e2bf2478738373c0b8fe4585f447
name: perl-subs
arch: noarch
version: 1.03
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Perl pragma to predeclare subroutine names
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-subs-1.03-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This will predeclare all the subroutines whose names are in the list,
  allowing you to use them without parentheses (as list operators) even
  before they're declared.


pkgId: 9cc085977cffc8c9d5d0d341f6dc9493907c4bddb4f7ed2fa02a145439cc48d9
name: perl-tests
arch: x86_64
version: 5.24.4
epoch: 4
release: 404.module+el8.1.0+2926+ce7246ad
summary: The Perl test suite
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-tests-5.24.4-404.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  This package contains the test suite included with Perl 5.24.4.

  Install this if you want to test your Perl installation (binary and core
  modules).


pkgId: baa4d3c624bbb3b931a6efeca3695f331b89e7fedc6c11e7990219161164827f
name: perl-tests
arch: x86_64
version: 5.26.3
epoch: 4
release: 419.el8
summary: The Perl test suite
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: baseos.ab
rpm_sourcerpm: perl-5.26.3-419.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-tests-5.26.3-419.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains the test suite included with Perl 5.26.3.

  Install this if you want to test your Perl installation (binary and core
  modules).


pkgId: eb4dd438d008f9295e08c6adba2634d5a2fe3d59190f5e3f641956a9c2ef828f
name: perl-tests
arch: x86_64
version: 5.30.1
epoch: 4
release: 451.module+el8.3.0+6961+31ca2e7a
summary: The Perl test suite
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: perl-5.30.1-451.module+el8.3.0+6961+31ca2e7a.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-tests-5.30.1-451.module+el8.3.0+6961+31ca2e7a.x86_64.rpm
checksum_type: sha256
description:
  This package contains the test suite included with Perl 5.30.1.

  Install this if you want to test your Perl installation (binary and core
  modules).


pkgId: 5c709d74882f5101a9366c8cb82a96bdae0b2378ddd74f066e401264523308b5
name: perl-threads
arch: x86_64
version: 2.21
epoch: 1
release: 3.module+el8.1.0+2926+ce7246ad
summary: Perl interpreter-based threads
url: http://search.cpan.org/dist/threads/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-threads-2.21-3.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-threads-2.21-3.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  Since Perl 5.8, thread programming has been available using a model called
  interpreter threads which provides a new Perl interpreter for each thread,
  and, by default, results in no data or state information being shared
  between threads.

  (Prior to Perl 5.8, 5005threads was available through the "Thread.pm" API.
  This threading model has been deprecated, and was removed as of Perl 5.10.0.)


pkgId: 402996df5b1edfe3d2c4e62678fa6f77d70655cdd5a89aa98f8a7ba956661817
name: perl-threads-shared
arch: x86_64
version: 1.58
epoch: 0
release: 3.module+el8.1.0+2926+ce7246ad
summary: Perl extension for sharing data structures between threads
url: http://search.cpan.org/dist/threads-shared/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-threads-shared-1.58-3.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-threads-shared-1.58-3.module+el8.1.0+2926+ce7246ad.x86_64.rpm
checksum_type: sha256
description:
  By default, variables are private to each thread, and each newly created
  thread gets a private copy of each existing variable. This module allows
  you to share variables across different threads (and pseudo-forks on
  Win32). It is used together with the threads module.


pkgId: 7ae9fe5acc8f642c349103f352c27dc0828a5a6a250181561164402f4dcaf220
name: perl-utils
arch: noarch
version: 5.24.4
epoch: 0
release: 404.module+el8.1.0+2926+ce7246ad
summary: Utilities packaged with the Perl distribution
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-5.24.4-404.module+el8.1.0+2926+ce7246ad.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-utils-5.24.4-404.module+el8.1.0+2926+ce7246ad.noarch.rpm
checksum_type: sha256
description:
  Several utilities which come with Perl distribution like c2ph, h2ph, perlbug,
  perlthanks, pl2pm, pstruct, and splain. Some utilities are provided by more
  specific packages like perldoc by perl-Pod-Perldoc.


pkgId: 8add48f852b7e78e1d6508c7f2fb5b90254788bd1342c2e058806efcb7b788c2
name: perl-utils
arch: noarch
version: 5.26.3
epoch: 0
release: 419.el8
summary: Utilities packaged with the Perl distribution
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: baseos.ab
rpm_sourcerpm: perl-5.26.3-419.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-utils-5.26.3-419.el8.noarch.rpm
checksum_type: sha256
description:
  Several utilities which come with Perl distribution like h2ph, perlbug,
  perlthanks, pl2pm, and splain. Some utilities are provided by more specific
  packages like perldoc by perl-Pod-Perldoc.


pkgId: a0ffa37ac5df0b1d5f198a9a2a22e6e106fe2c9e60bba1afe8b30de80bae9ab4
name: perl-utils
arch: noarch
version: 5.32.1
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Utilities packaged with the Perl distribution
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-utils-5.32.1-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  Several utilities which come with Perl distribution like h2ph, perlbug,
  perlthanks, and pl2pm. Some utilities are provided by more specific
  packages like perldoc by perl-Pod-Perldoc and splain by perl-diagnostics.


pkgId: 3daab9cc13378758626a960ea8ff86db32921039fa021c2f33e10ea8d050c2b7
name: perl-vars
arch: noarch
version: 1.05
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Perl pragma to predeclare global variable names
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-vars-1.05-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  This pragma will predeclare all the variables whose names are in the
  list, allowing you to use them under "use strict", and disabling any
  typo warnings for them.

  For use with variables in the current package for a single scope, the
  functionality provided by this pragma has been superseded by "our"
  declarations, available in Perl v5.6.0 or later, and use of this pragma is
  discouraged.


pkgId: ba9c303285106256da3f7e12ebe8917edb64a2e58daf109fc502b2b7169970a6
name: perl-version
arch: x86_64
version: 0.99.24
epoch: 6
release: 1.el8
summary: Perl extension for Version Objects
url: http://search.cpan.org/dist/version/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: perl-version-0.99.24-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-version-0.99.24-1.el8.x86_64.rpm
checksum_type: sha256
description:
  Version objects were added to Perl in 5.10. This module implements version
  objects for older version of Perl and provides the version object API for
  all versions of Perl. All previous releases before 0.74 are deprecated and
  should not be used due to incompatible API changes. Version 0.77 introduces
  the new 'parse' and 'declare' methods to standardize usage. You are
  strongly urged to set 0.77 as a minimum in your code.


pkgId: 2c16ee105029065291e0b4b27d2a0c8140f4bb5ebc4f0de3624e72d5d6460c71
name: perl-vmsish
arch: noarch
version: 1.04
epoch: 0
release: 471.module+el8.6.0+13324+628a2397
summary: Perl pragma to control VMS-specific language features
url: https://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: perl-5.32.1-471.module+el8.6.0+13324+628a2397.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/perl-vmsish-1.04-471.module+el8.6.0+13324+628a2397.noarch.rpm
checksum_type: sha256
description:
  The "vmsish" pragma control VMS-specific features of the Perl language. If
  you're not running VMS, this module does nothing.


pkgId: dfb659280d0015c1b4854c88485e12c1da923c19d3d76751635393226416fbad
name: pesign
arch: x86_64
version: 0.112
epoch: 0
release: 30.el8
summary: Signing utility for UEFI binaries
url: https://github.com/vathpela/pesign
rpm_license: GPLv2
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: pesign-0.112-30.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pesign-0.112-30.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains the pesign utility for signing UEFI binaries as
  well as other associated tools.


pkgId: eb189efc1f412ef694585c29056e00d7c242ce049216aad8df2fa0e8e5277a33
name: pg_repack
arch: x86_64
version: 1.4.6
epoch: 0
release: 3.module+el8.5.0+11354+78b3c9c5
summary: Reorganize tables in PostgreSQL databases without any locks
url: http://reorg.github.io/pg_repack/
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: Alex-Second-Builder-EL8.5
rpm_sourcerpm: pg_repack-1.4.6-3.module+el8.5.0+11354+78b3c9c5.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pg_repack-1.4.6-3.module+el8.5.0+11354+78b3c9c5.x86_64.rpm
checksum_type: sha256
description:
  pg_repack is a PostgreSQL extension which lets you remove
  bloat from tables and indexes, and optionally
  restore the physical order of clustered indexes.
  Unlike CLUSTER and VACUUM FULL it works online,
  without holding an exclusive lock on the processed tables during processing.
  pg_repack is efficient to boot,
  with performance comparable to using CLUSTER directly.

  Please check the documentation (in the doc directory or online)
  for installation and usage instructions.


pkgId: 2777c8f35959dcbde5b84e5dfa1fe88b03f883b13c18ad3ea5cb1596fdb726af
name: pgaudit
arch: x86_64
version: 1.4.0
epoch: 0
release: 4.module+el8.3.0+9042+664538f4
summary: PostgreSQL Audit Extension
url: http://pgaudit.org
rpm_license: PostgreSQL
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: pgaudit-1.4.0-4.module+el8.3.0+9042+664538f4.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pgaudit-1.4.0-4.module+el8.3.0+9042+664538f4.x86_64.rpm
checksum_type: sha256
description:
  The PostgreSQL Audit extension (pgaudit) provides detailed session
  and/or object audit logging via the standard PostgreSQL logging
  facility.

  The goal of the PostgreSQL Audit extension (pgaudit) is to provide
  PostgreSQL users with capability to produce audit logs often required to
  comply with government, financial, or ISO certifications.

  An audit is an official inspection of an individual's or organization's
  accounts, typically by an independent body. The information gathered by
  the PostgreSQL Audit extension (pgaudit) is properly called an audit
  trail or audit log. The term audit log is used in this documentation.


pkgId: 357468af5f1a74f1651a37dacfe5001b4c1d4f552d8499c2644ecc5e7f6e0bae
name: php
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: PHP scripting language for creating dynamic web sites
url: http://www.php.net/
rpm_license: PHP and Zend and BSD and MIT and ASL 1.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  PHP is an HTML-embedded scripting language. PHP attempts to make it
  easy for developers to write dynamically generated web pages. PHP also
  offers built-in database integration for several commercial and
  non-commercial database management systems, so writing a
  database-enabled webpage with PHP is fairly simple. The most common
  use of PHP coding is probably as a replacement for CGI scripts.

  The php package contains the module (often referred to as mod_php)
  which adds support for the PHP language to Apache HTTP Server.


pkgId: b684b42f193efb30bba5d4b268ccce1df4fd79f180d70a8b381bd1bea9eb53d5
name: php
arch: x86_64
version: 7.4.19
epoch: 0
release: 1.module+el8.5.0+11143+cc873159
summary: PHP scripting language for creating dynamic web sites
url: http://www.php.net/
rpm_license: PHP and Zend and BSD and MIT and ASL 1.0 and NCSA
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: Alex-Second-Builder-EL8.5
rpm_sourcerpm: php-7.4.19-1.module+el8.5.0+11143+cc873159.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-7.4.19-1.module+el8.5.0+11143+cc873159.x86_64.rpm
checksum_type: sha256
description:
  PHP is an HTML-embedded scripting language. PHP attempts to make it
  easy for developers to write dynamically generated web pages. PHP also
  offers built-in database integration for several commercial and
  non-commercial database management systems, so writing a
  database-enabled webpage with PHP is fairly simple. The most common
  use of PHP coding is probably as a replacement for CGI scripts.

  The php package contains the module (often referred to as mod_php)
  which adds support for the PHP language to Apache HTTP Server when
  running in prefork mode.


pkgId: 13fc0d9f5aedf546b30a2f3c393d11762feaf8ed598cbcc4ef48367f91c13387
name: php-bcmath
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: A module for PHP applications for using the bcmath library
url: http://www.php.net/
rpm_license: PHP and LGPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-bcmath-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-bcmath package contains a dynamic shared object that will add
  support for using the bcmath library to PHP.


pkgId: dd50579f161349a267169d78426a9e3ace82ee191037d0bca945cd1f807e543c
name: php-cli
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: Command-line interface for PHP
url: http://www.php.net/
rpm_license: PHP and Zend and BSD and MIT and ASL 1.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-cli-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-cli package contains the command-line interface
  executing PHP scripts, /usr/bin/php, and the CGI interface.


pkgId: 05557f4dd0b774bc445be139811072cb98e4c7ae61022c85eb39cd74f41afc2a
name: php-dba
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: A database abstraction layer module for PHP applications
url: http://www.php.net/
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-dba-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-dba package contains a dynamic shared object that will add
  support for using the DBA database abstraction layer to PHP.


pkgId: e1594740e53cc095147485a6418bbe199a39d304d15112f46be36f7579c6543d
name: php-devel
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: Files needed for building PHP extensions
url: http://www.php.net/
rpm_license: PHP and Zend and BSD and MIT and ASL 1.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-devel-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-devel package contains the files needed for building PHP
  extensions. If you need to compile your own PHP extensions, you will
  need to install this package.


pkgId: 52612496cac89aad34c602e33e758f5d3ca16c340f62f81eb6d92744c3364426
name: php-embedded
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: PHP library for embedding in applications
url: http://www.php.net/
rpm_license: PHP and Zend and BSD and MIT and ASL 1.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-embedded-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-embedded package contains a library which can be embedded
  into applications to provide PHP scripting language support.


pkgId: 3dfafecefe7d973139a844c7f563aeeb1572fb58f0b4b73c643239452764012d
name: php-enchant
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: Enchant spelling extension for PHP applications
url: http://www.php.net/
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-enchant-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-enchant package contains a dynamic shared object that will add
  support for using the enchant library to PHP.


pkgId: 7d55e4eaa41d53fd9539f7f4576fc33ed13d3e904071ea10f679026ca9f6db9e
name: php-ffi
arch: x86_64
version: 7.4.19
epoch: 0
release: 1.module+el8.5.0+11143+cc873159
summary: Foreign Function Interface
url: http://www.php.net/
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: System Environment/Libraries
rpm_buildhost: Alex-Second-Builder-EL8.5
rpm_sourcerpm: php-7.4.19-1.module+el8.5.0+11143+cc873159.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-ffi-7.4.19-1.module+el8.5.0+11143+cc873159.x86_64.rpm
checksum_type: sha256
description:
  FFI is one of the features that made Python and LuaJIT very useful for fast
  prototyping. It allows calling C functions and using C data types from pure
  scripting language and therefore develop “system code” more productively.

  For PHP, FFI opens a way to write PHP extensions and bindings to C libraries
  in pure PHP.


pkgId: 756fea542d31b9cb7ac147c983d0e090e1b0ec45b88a95745c50a978bdbc1092
name: php-fpm
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: PHP FastCGI Process Manager
url: http://www.php.net/
rpm_license: PHP and Zend and BSD and MIT and ASL 1.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-fpm-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  PHP-FPM (FastCGI Process Manager) is an alternative PHP FastCGI
  implementation with some additional features useful for sites of
  any size, especially busier sites.


pkgId: a21b3569a0f70b43dfc3c09088afe14d9b12f3be946d7b091546e3f252d04dac
name: php-gd
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: A module for PHP applications for using the gd graphics library
url: http://www.php.net/
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-gd-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-gd package contains a dynamic shared object that will add
  support for using the gd graphics library to PHP.


pkgId: dc3de3003e9044435e1ee20741f4c317dc3697011b4be115be047a9bc3b1e14d
name: php-intl
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: Internationalization extension for PHP applications
url: http://www.php.net/
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-intl-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-intl package contains a dynamic shared object that will add
  support for using the ICU library to PHP.


pkgId: d2aa6b8d7251f6044878a242f130af510a333fcfa067db06d631af97271cfbe4
name: php-json
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: JavaScript Object Notation extension for PHP
url: http://www.php.net/
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-json-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-json package provides an extension that will add
  support for JavaScript Object Notation (JSON) to PHP.


pkgId: 36d3778ec5955e246c372d4b0eeecd853e26e72a87168609ad106099cf41dc86
name: php-ldap
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: A module for PHP applications that use LDAP
url: http://www.php.net/
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-ldap-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-ldap adds Lightweight Directory Access Protocol (LDAP)
  support to PHP. LDAP is a set of protocols for accessing directory
  services over the Internet. PHP is an HTML-embedded scripting
  language.


pkgId: de51c6a649a9fe4af7793448c0b573628afe16f0e85c78ac305e798122760145
name: php-mbstring
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: A module for PHP applications which need multi-byte string handling
url: http://www.php.net/
rpm_license: PHP and LGPLv2 and OpenLDAP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-mbstring-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-mbstring package contains a dynamic shared object that will add
  support for multi-byte string handling to PHP.


pkgId: d56024a067ed71212f8457ef66c805786b1fbbfd621d8f33dee06990af305868
name: php-mysqlnd
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: A module for PHP applications that use MySQL databases
url: http://www.php.net/
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-mysqlnd-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-mysqlnd package contains a dynamic shared object that will add
  MySQL database support to PHP. MySQL is an object-relational database
  management system. PHP is an HTML-embeddable scripting language. If
  you need MySQL support for PHP applications, you will need to install
  this package and the php package.

  This package use the MySQL Native Driver


pkgId: ff57c0a7cdf4c287258503600ae58137c90d6063c821872097cb9e9bf826cea1
name: php-odbc
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: A module for PHP applications that use ODBC databases
url: http://www.php.net/
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-odbc-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-odbc package contains a dynamic shared object that will add
  database support through ODBC to PHP. ODBC is an open specification
  which provides a consistent API for developers to use for accessing
  data sources (which are often, but not always, databases). PHP is an
  HTML-embeddable scripting language. If you need ODBC support for PHP
  applications, you will need to install this package and the php
  package.


pkgId: 523e66046e4e86dbb4944f56ac49a13f84a3810b2b7ec793a25028c7fbcc9973
name: php-opcache
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: The Zend OPcache
url: http://www.php.net/
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-opcache-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The Zend OPcache provides faster PHP execution through opcode caching and
  optimization. It improves PHP performance by storing precompiled script
  bytecode in the shared memory. This eliminates the stages of reading code from
  the disk and compiling it on future access. In addition, it applies a few
  bytecode optimization patterns that make code execution faster.


pkgId: 80d42ba5f03cc93bf965adf94ad30ee0977147c9c8bbdb51e6850894bfa0f02d
name: php-pdo
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: A database access abstraction module for PHP applications
url: http://www.php.net/
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-pdo-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-pdo package contains a dynamic shared object that will add
  a database access abstraction layer to PHP.  This module provides
  a common interface for accessing MySQL, PostgreSQL or other
  databases.


pkgId: eec6695303548a0d6b617c8d9b98f4cff93029fa1a7d9ca63b9e716034441a2b
name: php-pear
arch: noarch
version: 1.10.12
epoch: 1
release: 1.module+el8.3.0+6678+b09f589e
summary: PHP Extension and Application Repository framework
url: http://pear.php.net/package/PEAR
rpm_license: BSD and LGPLv3+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: php-pear-1.10.12-1.module+el8.3.0+6678+b09f589e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-pear-1.10.12-1.module+el8.3.0+6678+b09f589e.noarch.rpm
checksum_type: sha256
description:
  PEAR is a framework and distribution system for reusable PHP
  components.  This package contains the basic PEAR components.


pkgId: 80667fd75462afa3046b333a69cfc9f9aa667376e22a05a2da9c6df683d29de0
name: php-pecl-apcu
arch: x86_64
version: 5.1.12
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: APC User Cache
url: http://pecl.php.net/package/APCu
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-pecl-apcu-5.1.12-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-pecl-apcu-5.1.12-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  APCu is userland caching: APC stripped of opcode caching.

  APCu only supports userland caching of variables.

  The php-pecl-apcu-bc package provides a drop
  in replacement for APC.


pkgId: 32226c71447f33817c052e0f25d1d9313c875094f469ccb11d5c709999a30f14
name: php-pecl-rrd
arch: x86_64
version: 2.0.1
epoch: 0
release: 1.module+el8.2.0+4968+1d5097db
summary: PHP Bindings for rrdtool
url: http://pecl.php.net/package/rrd
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-pecl-rrd-2.0.1-1.module+el8.2.0+4968+1d5097db.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-pecl-rrd-2.0.1-1.module+el8.2.0+4968+1d5097db.x86_64.rpm
checksum_type: sha256
description:
  Procedural and simple OO wrapper for rrdtool - data logging and graphing
  system for time series data.


pkgId: 634826b02011c345b933b638a4b17fb4eda673ae7e584ca05e9df4bb434d1d8d
name: php-pecl-xdebug
arch: x86_64
version: 2.8.0
epoch: 0
release: 1.module+el8.2.0+4968+1d5097db
summary: PECL package for debugging PHP scripts
url: https://xdebug.org/
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-pecl-xdebug-2.8.0-1.module+el8.2.0+4968+1d5097db.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-pecl-xdebug-2.8.0-1.module+el8.2.0+4968+1d5097db.x86_64.rpm
checksum_type: sha256
description:
  The Xdebug extension helps you debugging your script by providing a lot of
  valuable debug information. The debug information that Xdebug can provide
  includes the following:

  * stack and function traces in error messages with:
    o full parameter display for user defined functions
    o function name, file name and line indications
    o support for member functions
  * memory allocation
  * protection for infinite recursions

  Xdebug also provides:

  * profiling information for PHP scripts
  * code coverage analysis
  * capabilities to debug your scripts interactively with a debug client

  Documentation: https://xdebug.org/docs/


pkgId: a0004f4d567edaee40eedce2c16d82819e9189b924094477f1ab1c2de3ac5c74
name: php-pgsql
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: A PostgreSQL database module for PHP
url: http://www.php.net/
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-pgsql-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-pgsql package add PostgreSQL database support to PHP.
  PostgreSQL is an object-relational database management
  system that supports almost all SQL constructs. PHP is an
  HTML-embedded scripting language. If you need back-end support for
  PostgreSQL, you should install this package in addition to the main
  php package.


pkgId: e87251bada14378ddd30808c5f87d49151d08e9f64b0815971e1be4e216c8090
name: php-process
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: Modules for PHP script using system process interfaces
url: http://www.php.net/
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-process-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-process package contains dynamic shared objects which add
  support to PHP using system interfaces for inter-process
  communication.


pkgId: 569ba7bdf28ce0ff8b01690c6f898d3ea29adf5ca1145abfb9522073e8359ea5
name: php-recode
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: A module for PHP applications for using the recode library
url: http://www.php.net/
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-recode-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-recode package contains a dynamic shared object that will add
  support for using the recode library to PHP.


pkgId: 3e4c6d165baafab6be910f7a7b8dac4d62320c7384fcc9659fe05e3c5a77fb6e
name: php-snmp
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: A module for PHP applications that query SNMP-managed devices
url: http://www.php.net/
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-snmp-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-snmp package contains a dynamic shared object that will add
  support for querying SNMP devices to PHP.  PHP is an HTML-embeddable
  scripting language. If you need SNMP support for PHP applications, you
  will need to install this package and the php package.


pkgId: ab10451b57331f0dbe324d87a5233067a3d42826743c2f1976eee7aca58288d0
name: php-soap
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: A module for PHP applications that use the SOAP protocol
url: http://www.php.net/
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-soap-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-soap package contains a dynamic shared object that will add
  support to PHP for using the SOAP web services protocol.


pkgId: 244709996268809f30328af35353f1f29f5180d238b740fcdce67f992ce4ebb2
name: php-xml
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: A module for PHP applications which use XML
url: http://www.php.net/
rpm_license: PHP
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-xml-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-xml package contains dynamic shared objects which add support
  to PHP for manipulating XML documents using the DOM tree,
  and performing XSL transformations on XML documents.


pkgId: 5bcfa840ee54e9736b5f3ee203295976f774b467772697b7d3c62769c906c06a
name: php-xmlrpc
arch: x86_64
version: 7.2.11
epoch: 0
release: 1.module+el8+2561+1aca3413
summary: A module for PHP applications which use the XML-RPC protocol
url: http://www.php.net/
rpm_license: PHP and BSD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: php-7.2.11-1.module+el8+2561+1aca3413.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/php-xmlrpc-7.2.11-1.module+el8+2561+1aca3413.x86_64.rpm
checksum_type: sha256
description:
  The php-xmlrpc package contains a dynamic shared object that will add
  support for the XML-RPC protocol to PHP.


pkgId: eea0b22fb8261674a4194d35b4d60b63e3237e56b4a8b529c7be08fb494d0418
name: pidgin
arch: x86_64
version: 2.13.0
epoch: 0
release: 5.el8
summary: A Gtk+ based multiprotocol instant messaging client
url: http://pidgin.im/
rpm_license: BSD and GPLv2+ and GPLv2 and LGPLv2+ and MIT
rpm_vendor: EuroLinux
rpm_group: Applications/Internet
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pidgin-2.13.0-5.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pidgin-2.13.0-5.el8.x86_64.rpm
checksum_type: sha256
description:
  Pidgin allows you to talk to anyone using a variety of messaging
  protocols including AIM, MSN, Yahoo!, Jabber, Bonjour, Gadu-Gadu,
  ICQ, IRC, Novell Groupwise, QQ, Lotus Sametime, Simple and Zephyr.
  These protocols are implemented using a modular, easy to use design.
  To use a protocol, just add an account using the account editor.

  Pidgin supports many common features of other clients, as well as many
  unique features, such as perl scripting, TCL scripting and C plugins.

  Pidgin is not affiliated with or endorsed by America Online, Inc.,
  Microsoft Corporation, Yahoo! Inc., or ICQ Inc.


pkgId: 8e67d2847938b885ef6a0fb1ed572d77f1264aa3c00bcb5eec01c6fc3f86f88a
name: pidgin-sipe
arch: x86_64
version: 1.23.2
epoch: 0
release: 1.el8
summary: Pidgin protocol plugin to connect to MS Office Communicator
url: http://sipe.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: Applications/Communications
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pidgin-sipe-1.23.2-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pidgin-sipe-1.23.2-1.el8.x86_64.rpm
checksum_type: sha256
description:
  A third-party plugin for the Pidgin multi-protocol instant messenger.
  It implements the extended version of SIP/SIMPLE used by various products:

      * Skype for Business
      * Microsoft Office 365
      * Microsoft Business Productivity Online Suite (BPOS)
      * Microsoft Lync Server
      * Microsoft Office Communications Server (OCS 2007/2007 R2)
      * Microsoft Live Communications Server (LCS 2003/2005)

  With this plugin you should be able to replace your Microsoft Office
  Communicator client with Pidgin.

  This package provides the icon set for Pidgin.


pkgId: b8a360521c68dd053226a8a3d24fe1ed8ba31344e738c7b659c90c5407daf23c
name: pinentry
arch: x86_64
version: 1.1.0
epoch: 0
release: 2.el8
summary: Collection of simple PIN or passphrase entry dialogs
url: http://www.gnupg.org/aegypten/
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pinentry-1.1.0-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pinentry-1.1.0-2.el8.x86_64.rpm
checksum_type: sha256
description:
  Pinentry is a collection of simple PIN or passphrase entry dialogs which
  utilize the Assuan protocol as described by the aegypten project; see
  http://www.gnupg.org/aegypten/ for details.
  This package contains the curses (text) based version of the PIN entry dialog.


pkgId: cd6ace400d16a578b636672d27b59358b8727cabc677c4ab7d2aa8d4ca45010f
name: pinentry-emacs
arch: x86_64
version: 1.1.0
epoch: 0
release: 2.el8
summary: Passphrase/PIN entry dialog based on emacs
url: http://www.gnupg.org/aegypten/
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pinentry-1.1.0-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pinentry-emacs-1.1.0-2.el8.x86_64.rpm
checksum_type: sha256
description:
  Pinentry is a collection of simple PIN or passphrase entry dialogs which
  utilize the Assuan protocol as described by the aegypten project; see
  http://www.gnupg.org/aegypten/ for details.
  This package contains the emacs based version of the PIN entry dialog.


pkgId: 478166308507cffd7fcfd91bc383cde3911005b1a37e3865b316296329e18341
name: pinentry-gnome3
arch: x86_64
version: 1.1.0
epoch: 0
release: 2.el8
summary: Passphrase/PIN entry dialog for GNOME 3
url: http://www.gnupg.org/aegypten/
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pinentry-1.1.0-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pinentry-gnome3-1.1.0-2.el8.x86_64.rpm
checksum_type: sha256
description:
  Pinentry is a collection of simple PIN or passphrase entry dialogs which
  utilize the Assuan protocol as described by the aegypten project; see
  http://www.gnupg.org/aegypten/ for details.
  This package contains the GNOME 3 version of the PIN entry dialog.


pkgId: 165e491d1863eb3422877803c5007353de862ea433dda227697f56c2d1bc7418
name: pinentry-gtk
arch: x86_64
version: 1.1.0
epoch: 0
release: 2.el8
summary: Passphrase/PIN entry dialog based on GTK+
url: http://www.gnupg.org/aegypten/
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pinentry-1.1.0-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pinentry-gtk-1.1.0-2.el8.x86_64.rpm
checksum_type: sha256
description:
  Pinentry is a collection of simple PIN or passphrase entry dialogs which
  utilize the Assuan protocol as described by the aegypten project; see
  http://www.gnupg.org/aegypten/ for details.
  This package contains the GTK GUI based version of the PIN entry dialog.


pkgId: cf46786afe8bba3599a4594411d99c2e23946240dcbb2fe92a8e8600c1d36738
name: pinfo
arch: x86_64
version: 0.6.10
epoch: 0
release: 18.el8
summary: An info file viewer
url: http://pinfo.alioth.debian.org
rpm_license: GPLv2
rpm_vendor: EuroLinux
rpm_group: System Environment/Base
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pinfo-0.6.10-18.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pinfo-0.6.10-18.el8.x86_64.rpm
checksum_type: sha256
description:
  Pinfo is an info file (or man page) viewer with a user interface
  similar to the Lynx Web browser's interface.  Pinfo supports searching
  using regular expressions, and is based on the ncurses library.


pkgId: 6d08dfbe8de7051d58c0cef02e40ad630752859813b861cadbf661e4055d2885
name: pipewire-devel
arch: i686
version: 0.3.6
epoch: 0
release: 1.el8
summary: Headers and libraries for PipeWire client development
url: https://pipewire.org/
rpm_license: MIT
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: i686.ab.2
rpm_sourcerpm: pipewire-0.3.6-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pipewire-devel-0.3.6-1.el8.i686.rpm
checksum_type: sha256
description:
  Headers and libraries for developing applications that can communicate with
  a PipeWire media server.


pkgId: 20e510712e7e84b9c07ac453fa422e37bb8d1ba85e1156e132621072d193e284
name: pipewire-libs
arch: i686
version: 0.3.6
epoch: 0
release: 1.el8
summary: Libraries for PipeWire clients
url: https://pipewire.org/
rpm_license: MIT
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: i686.ab.2
rpm_sourcerpm: pipewire-0.3.6-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pipewire-libs-0.3.6-1.el8.i686.rpm
checksum_type: sha256
description:
  This package contains the runtime libraries for any application that wishes
  to interface with a PipeWire media server.


pkgId: 03486ba67c638f03065b291a8e22722804ebd3257dd2a28dfe8b0bf0c4b53e4d
name: pki-acme
arch: noarch
version: 10.10.5
epoch: 0
release: 3.module+el8.4.0+11039+635979e4
summary: PKI ACME Package
url: https://www.dogtagpki.org
rpm_license: GPLv2 and LGPLv2
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pki-core-10.10.5-3.module+el8.4.0+11039+635979e4.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pki-acme-10.10.5-3.module+el8.4.0+11039+635979e4.noarch.rpm
checksum_type: sha256
description:
  The PKI ACME responder is a service that provides an automatic certificate
  management via ACME v2 protocol defined in RFC 8555.


pkgId: dd914ca32044a4da093f2a9a4cfd0b5d268fc40d36f36f7420b2191a2ef63fec
name: pki-ca
arch: noarch
version: 10.10.5
epoch: 0
release: 3.module+el8.4.0+11039+635979e4
summary: PKI CA Package
url: https://www.dogtagpki.org
rpm_license: GPLv2 and LGPLv2
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pki-core-10.10.5-3.module+el8.4.0+11039+635979e4.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pki-ca-10.10.5-3.module+el8.4.0+11039+635979e4.noarch.rpm
checksum_type: sha256
description:
  The Certificate Authority (CA) is a required PKI subsystem which issues,
  renews, revokes, and publishes certificates as well as compiling and
  publishing Certificate Revocation Lists (CRLs).

  The Certificate Authority can be configured as a self-signing Certificate
  Authority, where it is the root CA, or it can act as a subordinate CA,
  where it obtains its own signing certificate from a public CA.


pkgId: f1683926c9e578c8a7345e0cb4caa589298950e7bacc8c5d06b84994a486af3d
name: pki-kra
arch: noarch
version: 10.10.5
epoch: 0
release: 3.module+el8.4.0+11039+635979e4
summary: PKI KRA Package
url: https://www.dogtagpki.org
rpm_license: GPLv2 and LGPLv2
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pki-core-10.10.5-3.module+el8.4.0+11039+635979e4.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pki-kra-10.10.5-3.module+el8.4.0+11039+635979e4.noarch.rpm
checksum_type: sha256
description:
  The Key Recovery Authority (KRA) is an optional PKI subsystem that can act
  as a key archival facility.  When configured in conjunction with the
  Certificate Authority (CA), the KRA stores private encryption keys as part of
  the certificate enrollment process.  The key archival mechanism is triggered
  when a user enrolls in the PKI and creates the certificate request.  Using the
  Certificate Request Message Format (CRMF) request format, a request is
  generated for the user's private encryption key.  This key is then stored in
  the KRA which is configured to store keys in an encrypted format that can only
  be decrypted by several agents requesting the key at one time, providing for
  protection of the public encryption keys for the users in the PKI deployment.

  Note that the KRA archives encryption keys; it does NOT archive signing keys,
  since such archival would undermine non-repudiation properties of signing keys.


pkgId: de398f889ff47619f4c6e583a6e93f7e35bcd74899eb542f1d204d5586a325fd
name: pki-server
arch: noarch
version: 10.9.4
epoch: 0
release: 3.module+el8.3.0+10353+73f6df5b
summary: PKI Server Package
url: http://www.dogtagpki.org/
rpm_license: GPLv2 and LGPLv2
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: pki-core-10.9.4-3.module+el8.3.0+10353+73f6df5b.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pki-server-10.9.4-3.module+el8.3.0+10353+73f6df5b.noarch.rpm
checksum_type: sha256
description:
  The PKI Server Package contains libraries and utilities needed by the
  following PKI subsystems:

      the Certificate Authority (CA),
      the Key Recovery Authority (KRA),
      the Online Certificate Status Protocol (OCSP) Manager,
      the Token Key Service (TKS), and
      the Token Processing Service (TPS).


pkgId: 2fffc0216784f8aeea4e0ab954ea2cad9b252a647f908f6c926739f00d3ed294
name: pki-servlet-engine
arch: noarch
version: 9.0.30
epoch: 1
release: 1.module+el8.3.0+6730+8f9c6254
summary: Apache Servlet/JSP Engine, RI for Servlet 4.0/JSP 2.3 API
url: http://tomcat.apache.org/
rpm_license: ASL 2.0
rpm_vendor: EuroLinux
rpm_group: System Environment/Daemons
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: pki-servlet-engine-9.0.30-1.module+el8.3.0+6730+8f9c6254.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pki-servlet-engine-9.0.30-1.module+el8.3.0+6730+8f9c6254.noarch.rpm
checksum_type: sha256
description:
  Tomcat is the servlet engine that is used in the official Reference
  Implementation for the Java Servlet and JavaServer Pages technologies.
  The Java Servlet and JavaServer Pages specifications are developed by
  Sun under the Java Community Process.

  Tomcat is developed in an open and participatory environment and
  released under the Apache Software License version 2.0. Tomcat is intended
  to be a collaboration of the best-of-breed developers from around the world.


pkgId: 07b8dab4157ff3e5599012e6bafdef33351cd41bf093567b00d74f67819654da
name: pki-symkey
arch: x86_64
version: 10.10.5
epoch: 0
release: 3.module+el8.4.0+11039+635979e4
summary: PKI Symmetric Key Package
url: https://www.dogtagpki.org
rpm_license: GPLv2 and LGPLv2
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pki-core-10.10.5-3.module+el8.4.0+11039+635979e4.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pki-symkey-10.10.5-3.module+el8.4.0+11039+635979e4.x86_64.rpm
checksum_type: sha256
description:
  The PKI Symmetric Key Java Package supplies various native
  symmetric key operations to Java programs.


pkgId: 4de3d33542b00500959facf469bbca9d397558253d33cfd27ccc7ec8a53a16f4
name: pki-tools
arch: x86_64
version: 10.10.5
epoch: 0
release: 3.module+el8.4.0+11039+635979e4
summary: PKI Tools Package
url: https://www.dogtagpki.org
rpm_license: GPLv2 and LGPLv2
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pki-core-10.10.5-3.module+el8.4.0+11039+635979e4.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pki-tools-10.10.5-3.module+el8.4.0+11039+635979e4.x86_64.rpm
checksum_type: sha256
description:
  This package contains PKI executables that can be used to help make
  Certificate System into a more complete and robust PKI solution.


pkgId: f06e19a493dd28235b71b36a8b4865ffaef22da72442061b5824790aebfd4529
name: platform-python
arch: i686
version: 3.6.8
epoch: 0
release: 38.el8_4
summary: Internal interpreter of the Python programming language
url: https://www.python.org/
rpm_license: Python
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python3-3.6.8-38.el8_4.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/platform-python-3.6.8-38.el8_4.i686.rpm
checksum_type: sha256
description:
  This is the internal interpreter of the Python language for the system.
  To use Python yourself, please install one of the available Python 3 packages,
  for example python36.


pkgId: 185c51fa5570d3d28afac050573f3bea1f12cd086cdb52b35674032974f7407e
name: platform-python-coverage
arch: x86_64
version: 4.5.1
epoch: 0
release: 7.el8
summary: Code coverage testing module for Python 3
url: http://nedbatchelder.com/code/modules/coverage.html
rpm_license: ASL 2.0 and MIT and (MIT or GPL)
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: python-coverage-4.5.1-7.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/platform-python-coverage-4.5.1-7.el8.x86_64.rpm
checksum_type: sha256
description:
  Coverage.py is a Python 3 module that measures code coverage during Python
  execution. It uses the code analysis tools and tracing hooks provided in the
  Python standard library to determine which lines are executable, and which
  have been executed.


pkgId: 70610c10a8dee592fbefd326c5403537d57e1aef22353ea6edfe6659d00d43da
name: platform-python-debug
arch: i686
version: 3.6.8
epoch: 0
release: 38.el8_4
summary: Debug version of the Python runtime
url: https://www.python.org/
rpm_license: Python
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python3-3.6.8-38.el8_4.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/platform-python-debug-3.6.8-38.el8_4.i686.rpm
checksum_type: sha256
description:
  python3-debug provides a version of the Python runtime with numerous debugging
  features enabled, aimed at advanced Python users such as developers of Python
  extension modules.

  This version uses more memory and will be slower than the regular Python build,
  but is useful for tracking down reference-counting issues and other bugs.

  The bytecode format is unchanged, so that .pyc files are compatible between
  this and the standard version of Python, but the debugging features mean that
  C/C++ extension modules are ABI-incompatible and must be built for each version
  separately.

  The debug build shares installation directories with the standard Python
  runtime, so that .py and .pyc files can be shared.
  Compiled extension modules use a special ABI flag ("d") in the filename,
  so extensions for both versions can co-exist in the same directory.


pkgId: 1e0c0867e58ca7d23fa655ca10437d66651cb794980eb16eab9a9164050ed705
name: platform-python-devel
arch: i686
version: 3.6.8
epoch: 0
release: 38.el8_4
summary: Libraries and header files needed for Python development
url: https://www.python.org/
rpm_license: Python
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python3-3.6.8-38.el8_4.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/platform-python-devel-3.6.8-38.el8_4.i686.rpm
checksum_type: sha256
description:
  This package contains the header files and configuration needed to compile
  Python extension modules (typically written in C or C++), to embed Python
  into other programs, and to make binary distributions for Python libraries.

  It also contains the necessary macros to build RPM packages with Python modules
  and 2to3 tool, an automatic source converter from Python 2.X.


pkgId: 7e52cce51133f7a70a0c7bf440d436ece16d4107ab8b88e780ea5ab344eee847
name: plexus-classworlds
arch: noarch
version: 2.5.2
epoch: 0
release: 9.module+el8+2452+b359bfcd
summary: Plexus Classworlds Classloader Framework
url: https://github.com/codehaus-plexus/plexus-classworlds
rpm_license: ASL 2.0 and Plexus
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: x86_64-alex-vbuilder
rpm_sourcerpm: plexus-classworlds-2.5.2-9.module+el8+2452+b359bfcd.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/plexus-classworlds-2.5.2-9.module+el8+2452+b359bfcd.noarch.rpm
checksum_type: sha256
description:
  Classworlds is a framework for container developers
  who require complex manipulation of Java's ClassLoaders.
  Java's native ClassLoader mechanisms and classes can cause
  much headache and confusion for certain types of
  application developers. Projects which involve dynamic
  loading of components or otherwise represent a 'container'
  can benefit from the classloading control provided by
  classworlds.


pkgId: 24278c28cb15f2a677f8304f8bc3fa043003fcbe297be40184ffa6d323c875d9
name: plexus-interpolation
arch: noarch
version: 1.22
epoch: 0
release: 9.module+el8+2452+b359bfcd
summary: Plexus Interpolation API
url: https://github.com/codehaus-plexus/plexus-interpolation
rpm_license: ASL 2.0 and ASL 1.1 and MIT
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: x86_64-alex-vbuilder
rpm_sourcerpm: plexus-interpolation-1.22-9.module+el8+2452+b359bfcd.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/plexus-interpolation-1.22-9.module+el8+2452+b359bfcd.noarch.rpm
checksum_type: sha256
description:
  Plexus interpolator is the outgrowth of multiple iterations of development
  focused on providing a more modular, flexible interpolation framework for
  the expression language style commonly seen in Maven, Plexus, and other
  related projects.


pkgId: 581c5190a00e08aaf2627cf3ee5b1154be7910defadc9ab1bfe1983955f3595a
name: plexus-utils
arch: noarch
version: 3.1.0
epoch: 0
release: 3.module+el8+2452+b359bfcd
summary: Plexus Common Utilities
url: https://codehaus-plexus.github.io/plexus-utils/
rpm_license: ASL 1.1 and ASL 2.0 and xpp and BSD and Public Domain
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: x86_64-alex-vbuilder
rpm_sourcerpm: plexus-utils-3.1.0-3.module+el8+2452+b359bfcd.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/plexus-utils-3.1.0-3.module+el8+2452+b359bfcd.noarch.rpm
checksum_type: sha256
description:
  The Plexus project seeks to create end-to-end developer tools for
  writing applications. At the core is the container, which can be
  embedded or for a full scale application server. There are many
  reusable components for hibernate, form processing, jndi, i18n,
  velocity, etc. Plexus also includes an application server which
  is like a J2EE application server, without all the baggage.


pkgId: 08ce5570cfa4434b8cb57baea29694a3a1e77c2e3f91e8ec8e1344efac94f6e9
name: plymouth
arch: x86_64
version: 0.9.4
epoch: 0
release: 10.20200615git1e36e30.el8
summary: Graphical Boot Animation and Logger
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: System Environment/Base
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: plymouth-0.9.4-10.20200615git1e36e30.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/plymouth-0.9.4-10.20200615git1e36e30.el8.x86_64.rpm
checksum_type: sha256
description:
  Plymouth provides an attractive graphical boot animation in
  place of the text messages that normally get shown.  Text
  messages are instead redirected to a log file for viewing
  after boot.


pkgId: bbc6bdb7990694bffb060416fa6f8129e57ea5ec8c4de1c6611341655ce60b94
name: plymouth-plugin-fade-throbber
arch: x86_64
version: 0.9.4
epoch: 0
release: 10.20200615git1e36e30.el8
summary: Plymouth "Fade-Throbber" plugin
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: System Environment/Base
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: plymouth-0.9.4-10.20200615git1e36e30.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/plymouth-plugin-fade-throbber-0.9.4-10.20200615git1e36e30.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains the "Fade-In" boot splash plugin for
  Plymouth. It features a centered image that fades in and out
  while other images pulsate around during system boot up.


pkgId: 10cdc1dd0ca2ceaa1144998734110f44ba9898ccb9ab05697342b863e0b3e999
name: plymouth-plugin-label
arch: x86_64
version: 0.9.4
epoch: 0
release: 10.20200615git1e36e30.el8
summary: Plymouth label plugin
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: System Environment/Base
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: plymouth-0.9.4-10.20200615git1e36e30.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/plymouth-plugin-label-0.9.4-10.20200615git1e36e30.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains the label control plugin for
  Plymouth. It provides the ability to render text on
  graphical boot splashes using pango and cairo.


pkgId: 1796cb9977159a93c3e1bf9a525f3f1d0d0617844ce5894e2cc7dd8a1790acb9
name: plymouth-plugin-script
arch: x86_64
version: 0.9.4
epoch: 0
release: 10.20200615git1e36e30.el8
summary: Plymouth "script" plugin
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: System Environment/Base
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: plymouth-0.9.4-10.20200615git1e36e30.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/plymouth-plugin-script-0.9.4-10.20200615git1e36e30.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains the "script" boot splash plugin for
  Plymouth. It features an extensible, scriptable boot splash
  language that simplifies the process of designing custom
  boot splash themes.


pkgId: 0e2617d849ddd2073e778663c5f202b863c4ceb95c5d61a5ecb33ffa03b12b97
name: plymouth-plugin-space-flares
arch: x86_64
version: 0.9.4
epoch: 0
release: 10.20200615git1e36e30.el8
summary: Plymouth "space-flares" plugin
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: System Environment/Base
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: plymouth-0.9.4-10.20200615git1e36e30.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/plymouth-plugin-space-flares-0.9.4-10.20200615git1e36e30.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains the "space-flares" boot splash plugin for
  Plymouth. It features a corner image with animated flares.


pkgId: a274d19e69b9df14eb09bebcb285aeacaf8cefbc9c2a32cdbecc98b3ff03915c
name: plymouth-plugin-throbgress
arch: x86_64
version: 0.9.4
epoch: 0
release: 10.20200615git1e36e30.el8
summary: Plymouth "Throbgress" plugin
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: System Environment/Base
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: plymouth-0.9.4-10.20200615git1e36e30.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/plymouth-plugin-throbgress-0.9.4-10.20200615git1e36e30.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains the "throbgress" boot splash plugin for
  Plymouth. It features a centered logo and animated spinner that
  spins repeatedly while a progress bar advances at the bottom of
  the screen.


pkgId: 4faf8e46fcce2e7a019731ac0d61e8fde59a953e41f0462b35424ef036d35fff
name: plymouth-plugin-two-step
arch: x86_64
version: 0.9.4
epoch: 0
release: 10.20200615git1e36e30.el8
summary: Plymouth "two-step" plugin
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: System Environment/Base
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: plymouth-0.9.4-10.20200615git1e36e30.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/plymouth-plugin-two-step-0.9.4-10.20200615git1e36e30.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains the "two-step" boot splash plugin for
  Plymouth. It features a two phased boot process that starts with
  a progressing animation synced to boot time and finishes with a
  short, fast one-shot animation.


pkgId: 84e8f7b6f4806e92bf8b1adbc72a8613c782f6854daa75ef204d7388708e8b03
name: plymouth-theme-charge
arch: x86_64
version: 0.9.4
epoch: 0
release: 10.20200615git1e36e30.el8
summary: Plymouth "Charge" plugin
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: System Environment/Base
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: plymouth-0.9.4-10.20200615git1e36e30.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/plymouth-theme-charge-0.9.4-10.20200615git1e36e30.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains the "charge" boot splash theme for
  Plymouth. It was the default theme for Red Hat Enterprise Linux.


pkgId: e65f7ae49624caf36413ce5ef0c0e3ab422f8f3be3a202cc81cd004647880f69
name: plymouth-theme-fade-in
arch: x86_64
version: 0.9.4
epoch: 0
release: 10.20200615git1e36e30.el8
summary: Plymouth "Fade-In" theme
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: System Environment/Base
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: plymouth-0.9.4-10.20200615git1e36e30.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/plymouth-theme-fade-in-0.9.4-10.20200615git1e36e30.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains the "Fade-In" boot splash theme for
  Plymouth. It features a centered logo that fades in and out
  while stars twinkle around the logo during system boot up.


pkgId: 79b6d05c145dca315ad7fa744c327f56bf21841702e55c943c62ec8e70843829
name: plymouth-theme-script
arch: x86_64
version: 0.9.4
epoch: 0
release: 10.20200615git1e36e30.el8
summary: Plymouth "Script" plugin
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: System Environment/Base
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: plymouth-0.9.4-10.20200615git1e36e30.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/plymouth-theme-script-0.9.4-10.20200615git1e36e30.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains the "script" boot splash theme for
  Plymouth. It it is a simple example theme the uses the "script"
  plugin.


pkgId: 6568b49a45b19900d670993798e301d53f0ebbe3659025f833f574f9dab6696d
name: plymouth-theme-solar
arch: x86_64
version: 0.9.4
epoch: 0
release: 10.20200615git1e36e30.el8
summary: Plymouth "Solar" theme
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: System Environment/Base
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: plymouth-0.9.4-10.20200615git1e36e30.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/plymouth-theme-solar-0.9.4-10.20200615git1e36e30.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains the "Solar" boot splash theme for
  Plymouth. It features a blue flamed sun with animated solar flares.


pkgId: deea29e6d17111c445eb0709d9088978233507d3fa307ba4c4bb035cb175b227
name: plymouth-theme-spinfinity
arch: x86_64
version: 0.9.4
epoch: 0
release: 10.20200615git1e36e30.el8
summary: Plymouth "Spinfinity" theme
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: System Environment/Base
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: plymouth-0.9.4-10.20200615git1e36e30.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/plymouth-theme-spinfinity-0.9.4-10.20200615git1e36e30.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains the "Spinfinity" boot splash theme for
  Plymouth. It features a centered logo and animated spinner that
  spins in the shape of an infinity sign.


pkgId: 3bb9c67a1ce5d5202155a211305918db8123fc40b62f6a47371802a9a5d9a819
name: plymouth-theme-spinner
arch: x86_64
version: 0.9.4
epoch: 0
release: 10.20200615git1e36e30.el8
summary: Plymouth "Spinner" theme
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: System Environment/Base
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: plymouth-0.9.4-10.20200615git1e36e30.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/plymouth-theme-spinner-0.9.4-10.20200615git1e36e30.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains the "spinner" boot splash theme for
  Plymouth. It features a small spinner on a dark background.


pkgId: b4b246be15b25df4754fb81895da7a979a29d360b30f62bba7cdcd7dbb0e0c15
name: pmdk-convert
arch: x86_64
version: 1.7
epoch: 0
release: 1.el8
summary: Conversion tool for PMDK pools
url: https://github.com/pmem/pmdk-convert
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pmdk-convert-1.7-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pmdk-convert-1.7-1.el8.x86_64.rpm
checksum_type: sha256
description:
  pmdk-convert is a tool for conversion of PMDK pools from any version
  to any consecutive version. Currently only libpmemobj pools require
  conversion and this tool supports only those kind of pools.


pkgId: b1b9b3ecb51199a54c48276a64000c3eba462cc71ad88eb1e6f6f0dc82c97879
name: pmempool
arch: x86_64
version: 1.11.1
epoch: 0
release: 1.module+el8.6.0+14043+a2e27587
summary: Utilities for Persistent Memory
url: http://pmem.io/pmdk
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: System Environment/Base
rpm_buildhost: x86_64-alex-vbuilder
rpm_sourcerpm: pmdk-1.11.1-1.module+el8.6.0+14043+a2e27587.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pmempool-1.11.1-1.module+el8.6.0+14043+a2e27587.x86_64.rpm
checksum_type: sha256
description:
  The pmempool is a standalone utility for management and off-line analysis
  of Persistent Memory pools created by PMDK libraries. It provides a set
  of utilities for administration and diagnostics of Persistent Memory pools.
  The pmempool may be useful for troubleshooting by system administrators
  and users of the applications based on PMDK libraries.


pkgId: 403dd504d3f487cd0473eaba9358b17bd1149bca7c41a7abfe5956e373e560d4
name: pmix
arch: i686
version: 2.2.4rc1
epoch: 0
release: 1.el8
summary: Process Management Interface Exascale (PMIx)
url: https://pmix.org/
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: i686.ab.2
rpm_sourcerpm: pmix-2.2.4rc1-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pmix-2.2.4rc1-1.el8.i686.rpm
checksum_type: sha256
description:
  The Process Management Interface (PMI) has been used for quite some time as
  a means of exchanging wireup information needed for interprocess
  communication. Two versions (PMI-1 and PMI-2) have been released as part of
  the MPICH effort. While PMI-2 demonstrates better scaling properties than its
  PMI-1 predecessor, attaining rapid launch and wireup of the roughly 1M
  processes executing across 100k nodes expected for exascale operations remains
  challenging.

  PMI Exascale (PMIx) represents an attempt to resolve these questions by
  providing an extended version of the PMI standard specifically designed to
  support clusters up to and including exascale sizes. The overall objective of
  the project is not to branch the existing pseudo-standard definitions - in
  fact, PMIx fully supports both of the existing PMI-1 and PMI-2 APIs - but
  rather to (a) augment and extend those APIs to eliminate some current
  restrictions that impact scalability, and (b) provide a reference
  implementation of the PMI-server that demonstrates the desired level of
  scalability.


pkgId: fa82d96d178b0a4795296b4085ebc8838072c4e876e19c1982d7272a7f0bbe86
name: pmreorder
arch: x86_64
version: 1.11.1
epoch: 0
release: 1.module+el8.6.0+14043+a2e27587
summary: Consistency Checker for Persistent Memory
url: http://pmem.io/pmdk
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: __GROUP_SYS_BASE__
rpm_buildhost: x86_64-alex-vbuilder
rpm_sourcerpm: pmdk-1.11.1-1.module+el8.6.0+14043+a2e27587.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pmreorder-1.11.1-1.module+el8.6.0+14043+a2e27587.x86_64.rpm
checksum_type: sha256
description:
  The pmreorder tool is a collection of python scripts designed to parse
  and replay operations logged by pmemcheck - a persistent memory checking tool.
  Pmreorder performs the store reordering between persistent memory barriers -
  a sequence of flush-fence operations. It uses a consistency checking routine
  provided in the command line options to check whether files are in a consistent state.


pkgId: d1c78e6399a8f1f23463dd2d58433a5071b2e800c55b57ef9493433829fec88d
name: pnm2ppa
arch: x86_64
version: 1.04
epoch: 1
release: 40.el8
summary: Drivers for printing to HP PPA printers
url: http://sourceforge.net/projects/pnm2ppa
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pnm2ppa-1.04-40.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pnm2ppa-1.04-40.el8.x86_64.rpm
checksum_type: sha256
description:
  Pnm2ppa is a color driver for HP PPA host-based printers such as the
  HP710C, 712C, 720C, 722C, 820Cse, 820Cxi, 1000Cse, and 1000Cxi.
  Pnm2ppa accepts Ghostscript output in PPM format and sends it to the
  printer in PPA format.

  Install pnm2ppa if you need to print to a PPA printer.


pkgId: 25e2f14527e9d20eb93575a2072f6c0ef629862c6d500c87c28b936ce3f346ec
name: podman
arch: x86_64
version: 1.0.0
epoch: 0
release: 8.git921f98f.module+el8.3.0+10171+12421f43
summary: Manage Pods, Containers and Container Images
url: https://github.com/containers/libpod
rpm_license: ASL 2.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: podman-1.0.0-8.git921f98f.module+el8.3.0+10171+12421f43.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/podman-1.0.0-8.git921f98f.module+el8.3.0+10171+12421f43.x86_64.rpm
checksum_type: sha256
description:
  Manage Pods, Containers and Container Images
  libpod provides a library for applications looking to use
  the Container Pod concept popularized by Kubernetes.


pkgId: c60618a78d5c39029e3d519de17438ea7f06b0e821a6fe2f022641497a7acaed
name: podman
arch: x86_64
version: 1.6.4
epoch: 0
release: 26.module+el8.3.0+10188+4c10031c
summary: Manage Pods, Containers and Container Images
url: https://podman.io/
rpm_license: ASL 2.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: podman-1.6.4-26.module+el8.3.0+10188+4c10031c.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/podman-1.6.4-26.module+el8.3.0+10188+4c10031c.x86_64.rpm
checksum_type: sha256
description:
  podman (Pod Manager) is a fully featured container engine that is a simple daemonless tool.  podman provides a Docker-CLI comparable command line that eases the transition from other container engines and allows the management of pods, containers and images.  Simply put: alias docker=podman.  Most podman commands can be run as a regular user, without requiring additional privileges.

  podman uses Buildah(1) internally to create container images. Both tools share image (not container) storage, hence each can use or manipulate images (but not containers) created by the other.

  Manage Pods, Containers and Container Images
  libpod Simple management tool for pods, containers and images


pkgId: b8d305695aa3bf2b9d4ccd8b0cc39c83ce88d3cc8a0724f245b9cc104d23528e
name: podman
arch: x86_64
version: 2.2.1
epoch: 0
release: 7.module+el8.3.1+9857+68fb1526
summary: Manage Pods, Containers and Container Images
url: https://podman.io/
rpm_license: ASL 2.0 and GPLv3+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: podman-2.2.1-7.module+el8.3.1+9857+68fb1526.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/podman-2.2.1-7.module+el8.3.1+9857+68fb1526.x86_64.rpm
checksum_type: sha256
description:
  podman (Pod Manager) is a fully featured container engine that is a simple
  daemonless tool.  podman provides a Docker-CLI comparable command line that
  eases the transition from other container engines and allows the management of
  pods, containers and images.  Simply put: alias docker=podman.
  Most podman commands can be run as a regular user, without requiring
  additional privileges.

  podman uses Buildah(1) internally to create container images.
  Both tools share image (not container) storage, hence each can use or
  manipulate images (but not containers) created by the other.

  Manage Pods, Containers and Container Images
  podman Simple management tool for pods, containers and images


pkgId: 1830f30bc1cf00d08d2d853ba8d9c79afbe00466cc021948ed18edfe9636b1c3
name: podman-catatonit
arch: x86_64
version: 2.2.1
epoch: 0
release: 7.module+el8.3.1+9857+68fb1526
summary: A signal-forwarding process manager for containers
url: https://podman.io/
rpm_license: ASL 2.0 and GPLv3+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: podman-2.2.1-7.module+el8.3.1+9857+68fb1526.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/podman-catatonit-2.2.1-7.module+el8.3.1+9857+68fb1526.x86_64.rpm
checksum_type: sha256
description:
  Catatonit is a /sbin/init program for use within containers. It
  forwards (almost) all signals to the spawned child, tears down
  the container when the spawned child exits, and otherwise
  cleans up other exited processes (zombies).

  This is a reimplementation of other container init programs (such as
  "tini" or "dumb-init"), but uses modern Linux facilities (such as
  signalfd(2)) and has no additional features.


pkgId: 25eb202395905ea833de82744fe64d002ad002eeb82744c65df57e3f044a245d
name: podman-docker
arch: noarch
version: 1.0.0
epoch: 0
release: 8.git921f98f.module+el8.3.0+10171+12421f43
summary: Emulate Docker CLI using podman
url: https://github.com/containers/libpod
rpm_license: ASL 2.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: podman-1.0.0-8.git921f98f.module+el8.3.0+10171+12421f43.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/podman-docker-1.0.0-8.git921f98f.module+el8.3.0+10171+12421f43.noarch.rpm
checksum_type: sha256
description:
  This package installs a script named docker that emulates the Docker CLI by
  executing podman commands, it also creates links between all Docker CLI man
  pages and podman.


pkgId: 9bdce30d7f9c7f9d898887c1b576b025d6d3da95ca282a2fcfe063beb03a38c4
name: podman-docker
arch: noarch
version: 1.6.4
epoch: 0
release: 26.module+el8.3.0+10188+4c10031c
summary: Emulate Docker CLI using podman
url: https://podman.io/
rpm_license: ASL 2.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: podman-1.6.4-26.module+el8.3.0+10188+4c10031c.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/podman-docker-1.6.4-26.module+el8.3.0+10188+4c10031c.noarch.rpm
checksum_type: sha256
description:
  This package installs a script named docker that emulates the Docker CLI by
  executes podman commands, it also creates links between all Docker CLI man
  pages and podman.


pkgId: 0564e7aae5cebcf8da4a5db11a382cc9ec950aacf2cc5639e56896db92c66586
name: podman-gvproxy
arch: x86_64
version: 3.3.1
epoch: 0
release: 9.module+el8.5.0+12697+018f24d7
summary: Go replacement for libslirp and VPNKit
url: https://podman.io/
rpm_license: ASL 2.0 and GPLv3+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: podman-3.3.1-9.module+el8.5.0+12697+018f24d7.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/podman-gvproxy-3.3.1-9.module+el8.5.0+12697+018f24d7.x86_64.rpm
checksum_type: sha256
description:
  A replacement for libslirp and VPNKit, written in pure Go.
  It is based on the network stack of gVisor. Compared to libslirp,
  gvisor-tap-vsock brings a configurable DNS server and
  dynamic port forwarding.


pkgId: 0f4e9e8a2a4a219d8e149438860c131f92e6aed7aeefa919f7a4a591446edfc0
name: podman-plugins
arch: x86_64
version: 2.2.1
epoch: 0
release: 7.module+el8.3.1+9857+68fb1526
summary: Plugins for podman
url: https://podman.io/
rpm_license: ASL 2.0 and GPLv3+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: podman-2.2.1-7.module+el8.3.1+9857+68fb1526.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/podman-plugins-2.2.1-7.module+el8.3.1+9857+68fb1526.x86_64.rpm
checksum_type: sha256
description:
  This plugin sets up the use of dnsmasq on a given CNI network so
  that Pods can resolve each other by name.  When configured,
  the pod and its IP address are added to a network specific hosts file
  that dnsmasq will read in.  Similarly, when a pod
  is removed from the network, it will remove the entry from the hosts
  file.  Each CNI network will have its own dnsmasq instance.


pkgId: 24592638bd0394bdf2f668e36b22c5b276fae4999104e6b731671fdfd12cb7df
name: podman-remote
arch: x86_64
version: 1.6.4
epoch: 0
release: 26.module+el8.3.0+10188+4c10031c
summary: (Experimental) Remote client for managing podman containers
url: https://podman.io/
rpm_license: ASL 2.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: podman-1.6.4-26.module+el8.3.0+10188+4c10031c.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/podman-remote-1.6.4-26.module+el8.3.0+10188+4c10031c.x86_64.rpm
checksum_type: sha256
description:
  Remote client for managing podman containers.

  This experimental remote client is under heavy development. Please do not
  run podman-remote in production.

  podman-remote uses the varlink connection to connect to a podman client to
  manage pods, containers and container images. podman-remote supports ssh
  connections as well.


pkgId: 5667dbda29820a5226f3a95ccab900e5bc742e5fff5e3ad98732cace89f2ee7b
name: podman-remote
arch: x86_64
version: 3.0.1
epoch: 0
release: 13.module+el8.7.0+16212+65e1b35f
summary: A remote CLI for Podman: A Simple management tool for pods, containers and images
url: https://podman.io/
rpm_license: ASL 2.0 and GPLv3+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: AB-EL8-Builder1
rpm_sourcerpm: podman-3.0.1-13.module+el8.7.0+16212+65e1b35f.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/podman-remote-3.0.1-13.module+el8.7.0+16212+65e1b35f.x86_64.rpm
checksum_type: sha256
description:
  podman-remote provides a local client interacting with a Podman backend
  node through a RESTful API tunneled through a ssh connection. In this context,
  a podman node is a Linux system with Podman installed on it and the API
  service activated.

  Credentials for this session can be passed in using flags, environment
  variables, or in containers.conf.


pkgId: 1710b26c167ca9be26eda336ac2c931ad6c25f109b5b3d5831fe2b32393b65fe
name: poppler-data
arch: noarch
version: 0.4.9
epoch: 0
release: 1.el8
summary: Encoding files for use with poppler
url: https://poppler.freedesktop.org/
rpm_license: BSD and GPLv2
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: poppler-data-0.4.9-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/poppler-data-0.4.9-1.el8.noarch.rpm
checksum_type: sha256
description:
  This package consists of encoding files for use with poppler. The encoding
  files are optional and poppler will automatically read them if they are present.

  When installed, the encoding files enables poppler to correctly render both CJK
  and Cyrrilic characters properly.


pkgId: 26682f6d271bbec2bf27a50849dc0a535e90860b0ee17ba09ca53a6640b2d4af
name: postfix-cdb
arch: x86_64
version: 3.3.1
epoch: 2
release: 12.el8_3.1
summary: Postfix CDB map support
url: http://www.postfix.org
rpm_license: (IBM and GPLv2+) or (EPL-2.0 and GPLv2+)
rpm_vendor: EuroLinux
rpm_group: System Environment/Daemons
rpm_buildhost: eurolinux-build-spinning
rpm_sourcerpm: postfix-3.3.1-12.el8_3.1.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postfix-cdb-3.3.1-12.el8_3.1.x86_64.rpm
checksum_type: sha256
description:
  This provides support for CDB maps in Postfix. If you plan to use CDB
  maps with Postfix, you need this.


pkgId: 28e7f8599b25b901d9b411f2b6a20a4d36a7bce40f2b79ca917474a60bd0241b
name: postfix-ldap
arch: x86_64
version: 3.3.1
epoch: 2
release: 12.el8_3.1
summary: Postfix LDAP map support
url: http://www.postfix.org
rpm_license: (IBM and GPLv2+) or (EPL-2.0 and GPLv2+)
rpm_vendor: EuroLinux
rpm_group: System Environment/Daemons
rpm_buildhost: eurolinux-build-spinning
rpm_sourcerpm: postfix-3.3.1-12.el8_3.1.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postfix-ldap-3.3.1-12.el8_3.1.x86_64.rpm
checksum_type: sha256
description:
  This provides support for LDAP maps in Postfix. If you plan to use LDAP
  maps with Postfix, you need this.


pkgId: 2aae47f909effcbbaff0056645786c2a8652e7150ecd158e900e4fb140191b76
name: postfix-mysql
arch: x86_64
version: 3.3.1
epoch: 2
release: 12.el8_3.1
summary: Postfix MySQL map support
url: http://www.postfix.org
rpm_license: (IBM and GPLv2+) or (EPL-2.0 and GPLv2+)
rpm_vendor: EuroLinux
rpm_group: System Environment/Daemons
rpm_buildhost: eurolinux-build-spinning
rpm_sourcerpm: postfix-3.3.1-12.el8_3.1.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postfix-mysql-3.3.1-12.el8_3.1.x86_64.rpm
checksum_type: sha256
description:
  This provides support for MySQL maps in Postfix. If you plan to use MySQL
  maps with Postfix, you need this.


pkgId: 8ec5151c0eed4eef3c6c90e2ac55a7e6fc3e6176206d8d1bbe26e0db6e7cd805
name: postfix-pcre
arch: x86_64
version: 3.3.1
epoch: 2
release: 12.el8_3.1
summary: Postfix PCRE map support
url: http://www.postfix.org
rpm_license: (IBM and GPLv2+) or (EPL-2.0 and GPLv2+)
rpm_vendor: EuroLinux
rpm_group: System Environment/Daemons
rpm_buildhost: eurolinux-build-spinning
rpm_sourcerpm: postfix-3.3.1-12.el8_3.1.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postfix-pcre-3.3.1-12.el8_3.1.x86_64.rpm
checksum_type: sha256
description:
  This provides support for PCRE maps in Postfix. If you plan to use PCRE
  maps with Postfix, you need this.


pkgId: 06050b61ba83e5e49fb7f76aee524d4370b1acd3e80e2086d62c081e0557921e
name: postfix-perl-scripts
arch: x86_64
version: 3.3.1
epoch: 2
release: 12.el8_3.1
summary: Postfix utilities written in perl
url: http://www.postfix.org
rpm_license: (IBM and GPLv2+) or (EPL-2.0 and GPLv2+)
rpm_vendor: EuroLinux
rpm_group: Applications/System
rpm_buildhost: eurolinux-build-spinning
rpm_sourcerpm: postfix-3.3.1-12.el8_3.1.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postfix-perl-scripts-3.3.1-12.el8_3.1.x86_64.rpm
checksum_type: sha256
description:
  This package contains perl scripts pflogsumm and qshape.

  Pflogsumm is a log analyzer/summarizer for the Postfix MTA. It is
  designed to provide an over-view of Postfix activity. Pflogsumm
  generates summaries and, in some cases, detailed reports of mail
  server traffic volumes, rejected and bounced email, and server
  warnings, errors and panics.

  qshape prints Postfix queue domain and age distribution.


pkgId: 13691d0cb563234a4e93a95fee1f7acbd57e8d13b036331af78c4a6e50115b71
name: postfix-pgsql
arch: x86_64
version: 3.3.1
epoch: 2
release: 12.el8_3.1
summary: Postfix PostgreSQL map support
url: http://www.postfix.org
rpm_license: (IBM and GPLv2+) or (EPL-2.0 and GPLv2+)
rpm_vendor: EuroLinux
rpm_group: System Environment/Daemons
rpm_buildhost: eurolinux-build-spinning
rpm_sourcerpm: postfix-3.3.1-12.el8_3.1.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postfix-pgsql-3.3.1-12.el8_3.1.x86_64.rpm
checksum_type: sha256
description:
  This provides support for PostgreSQL  maps in Postfix. If you plan to use
  PostgreSQL maps with Postfix, you need this.


pkgId: f09901a624f555f566c9f6a62a57ef4b0aa70ec5b54f7755e949bbada3e4c68f
name: postfix-sqlite
arch: x86_64
version: 3.3.1
epoch: 2
release: 12.el8_3.1
summary: Postfix SQLite map support
url: http://www.postfix.org
rpm_license: (IBM and GPLv2+) or (EPL-2.0 and GPLv2+)
rpm_vendor: EuroLinux
rpm_group: System Environment/Daemons
rpm_buildhost: eurolinux-build-spinning
rpm_sourcerpm: postfix-3.3.1-12.el8_3.1.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postfix-sqlite-3.3.1-12.el8_3.1.x86_64.rpm
checksum_type: sha256
description:
  This provides support for SQLite maps in Postfix. If you plan to use SQLite
  maps with Postfix, you need this.


pkgId: b0856d565b7dc52ca6fd373a04d2b663eb782b5c1c0b9a0ee50b55c7d5b43fcb
name: postgresql
arch: x86_64
version: 10.15
epoch: 0
release: 1.module+el8.3.0+8944+1ca16b1f
summary: PostgreSQL client programs
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: EuroLinux
rpm_group: Applications/Databases
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: postgresql-10.15-1.module+el8.3.0+8944+1ca16b1f.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postgresql-10.15-1.module+el8.3.0+8944+1ca16b1f.x86_64.rpm
checksum_type: sha256
description:
  PostgreSQL is an advanced Object-Relational database management system (DBMS).
  The base postgresql package contains the client programs that you'll need to
  access a PostgreSQL DBMS server, as well as HTML documentation for the whole
  system.  These client programs can be located on the same machine as the
  PostgreSQL server, or on a remote machine that accesses a PostgreSQL server
  over a network connection.  The PostgreSQL server can be found in the
  postgresql-server sub-package.


pkgId: 538d001644d41262d1c05e20233a678d6f8a7bccabc46836e7c4be0e5f9a306d
name: postgresql-contrib
arch: x86_64
version: 10.15
epoch: 0
release: 1.module+el8.3.0+8944+1ca16b1f
summary: Extension modules distributed with PostgreSQL
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: EuroLinux
rpm_group: Applications/Databases
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: postgresql-10.15-1.module+el8.3.0+8944+1ca16b1f.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postgresql-contrib-10.15-1.module+el8.3.0+8944+1ca16b1f.x86_64.rpm
checksum_type: sha256
description:
  The postgresql-contrib package contains various extension modules that are
  included in the PostgreSQL distribution.


pkgId: bf0bf8a1ac39a88f931594e6e52bbb537e68955ffeb20483824b3b0018669d3e
name: postgresql-docs
arch: x86_64
version: 10.15
epoch: 0
release: 1.module+el8.3.0+8944+1ca16b1f
summary: Extra documentation for PostgreSQL
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: EuroLinux
rpm_group: Applications/Databases
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: postgresql-10.15-1.module+el8.3.0+8944+1ca16b1f.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postgresql-docs-10.15-1.module+el8.3.0+8944+1ca16b1f.x86_64.rpm
checksum_type: sha256
description:
  The postgresql-docs package contains some additional documentation for
  PostgreSQL.  Currently, this includes the main documentation in PDF format
  and source files for the PostgreSQL tutorial.


pkgId: ae8ea8ec1068d2d1e867bcffa76d028091e5b91da4f09b8a975c41850b03fe0c
name: postgresql-jdbc
arch: noarch
version: 42.2.14
epoch: 0
release: 1.el8
summary: JDBC driver for PostgreSQL
url: http://jdbc.postgresql.org/
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: source-and-rpm-rhel-vm
rpm_sourcerpm: postgresql-jdbc-42.2.14-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postgresql-jdbc-42.2.14-1.el8.noarch.rpm
checksum_type: sha256
description:
  PostgreSQL is an advanced Object-Relational database management
  system. The postgresql-jdbc package includes the .jar files needed for
  Java programs to access a PostgreSQL database.


pkgId: 74d78bfbf9fd3c01d49f3ce9cc8a18bf2ad4b691c5a2c39e6382fb2b18e69348
name: postgresql-odbc
arch: x86_64
version: 10.03.0000
epoch: 0
release: 2.el8
summary: PostgreSQL ODBC driver
url: https://odbc.postgresql.org/
rpm_license: LGPLv2+
rpm_vendor: EuroLinux
rpm_group: Applications/Databases
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: postgresql-odbc-10.03.0000-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postgresql-odbc-10.03.0000-2.el8.x86_64.rpm
checksum_type: sha256
description:
  This package includes the driver needed for applications to access a
  PostgreSQL system via ODBC (Open Database Connectivity).


pkgId: d8b1a76de4e22dbf4c909f81a758a71e4957adfab31b64fcf1460c0703974fc6
name: postgresql-odbc-tests
arch: x86_64
version: 10.03.0000
epoch: 0
release: 2.el8
summary: Testsuite files for psqlodbc
url: https://odbc.postgresql.org/
rpm_license: LGPLv2+
rpm_vendor: EuroLinux
rpm_group: Applications/Databases
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: postgresql-odbc-10.03.0000-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postgresql-odbc-tests-10.03.0000-2.el8.x86_64.rpm
checksum_type: sha256
description:
  The postgresql-odbc-tests package contains files needed for various tests for
  the PostgreSQL unixODBC driver.


pkgId: 70d56de84c57aaf99852b3892a34ecab1990bd2058ca5dd6f617a794b08fa003
name: postgresql-plperl
arch: x86_64
version: 10.15
epoch: 0
release: 1.module+el8.3.0+8944+1ca16b1f
summary: The Perl procedural language for PostgreSQL
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: EuroLinux
rpm_group: Applications/Databases
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: postgresql-10.15-1.module+el8.3.0+8944+1ca16b1f.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postgresql-plperl-10.15-1.module+el8.3.0+8944+1ca16b1f.x86_64.rpm
checksum_type: sha256
description:
  The postgresql-plperl package contains the PL/Perl procedural language,
  which is an extension to the PostgreSQL database server.
  Install this if you want to write database functions in Perl.


pkgId: c206f674375fe4541a3fb33263fa28aec54fe88d31b665dbadaa80b5e26e113f
name: postgresql-plpython3
arch: x86_64
version: 10.15
epoch: 0
release: 1.module+el8.3.0+8944+1ca16b1f
summary: The Python3 procedural language for PostgreSQL
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: EuroLinux
rpm_group: Applications/Databases
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: postgresql-10.15-1.module+el8.3.0+8944+1ca16b1f.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postgresql-plpython3-10.15-1.module+el8.3.0+8944+1ca16b1f.x86_64.rpm
checksum_type: sha256
description:
  The postgresql-plpython3 package contains the PL/Python3 procedural language,
  which is an extension to the PostgreSQL database server.
  Install this if you want to write database functions in Python 3.


pkgId: 7b64d63a3f57e19b6639dc7f2126aedc72caf0f71b58e4d289d209100de088cc
name: postgresql-pltcl
arch: x86_64
version: 10.15
epoch: 0
release: 1.module+el8.3.0+8944+1ca16b1f
summary: The Tcl procedural language for PostgreSQL
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: EuroLinux
rpm_group: Applications/Databases
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: postgresql-10.15-1.module+el8.3.0+8944+1ca16b1f.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postgresql-pltcl-10.15-1.module+el8.3.0+8944+1ca16b1f.x86_64.rpm
checksum_type: sha256
description:
  The postgresql-pltcl package contains the PL/Tcl procedural language,
  which is an extension to the PostgreSQL database server.
  Install this if you want to write database functions in Tcl.


pkgId: 228c869d12c1bcabd1ce79686549f293bea6eda5c313217425cb3504c61d78f3
name: postgresql-server
arch: x86_64
version: 10.15
epoch: 0
release: 1.module+el8.3.0+8944+1ca16b1f
summary: The programs needed to create and run a PostgreSQL server
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: EuroLinux
rpm_group: Applications/Databases
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: postgresql-10.15-1.module+el8.3.0+8944+1ca16b1f.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postgresql-server-10.15-1.module+el8.3.0+8944+1ca16b1f.x86_64.rpm
checksum_type: sha256
description:
  PostgreSQL is an advanced Object-Relational database management system (DBMS).
  The postgresql-server package contains the programs needed to create
  and run a PostgreSQL server, which will in turn allow you to create
  and maintain PostgreSQL databases.


pkgId: c82b90c6efd1463fe39ed38eec1a752bcb685a282d0721b59561cdd022e19987
name: postgresql-server-devel
arch: x86_64
version: 10.15
epoch: 0
release: 1.module+el8.3.0+8944+1ca16b1f
summary: PostgreSQL development header files and libraries
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: postgresql-10.15-1.module+el8.3.0+8944+1ca16b1f.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postgresql-server-devel-10.15-1.module+el8.3.0+8944+1ca16b1f.x86_64.rpm
checksum_type: sha256
description:
  The postgresql-server-devel package contains the header files and libraries
  needed to compile C or C++ applications which will directly interact
  with a PostgreSQL database management server.  It also contains the ecpg
  Embedded C Postgres preprocessor. You need to install this package if you want
  to develop applications which will interact with a PostgreSQL server.


pkgId: 91f5007592e0c1db2b5ef4c4b51704983e52607dc3959ef9a63b82aa0f9cf74a
name: postgresql-server-devel
arch: x86_64
version: 12.11
epoch: 0
release: 2.module+el8.6.0+15345+1dd8d6b8
summary: PostgreSQL development header files and libraries
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-32gb-nbg1-2
rpm_sourcerpm: postgresql-12.11-2.module+el8.6.0+15345+1dd8d6b8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postgresql-server-devel-12.11-2.module+el8.6.0+15345+1dd8d6b8.x86_64.rpm
checksum_type: sha256
description:
  The postgresql-server-devel package contains the header files and configuration
  needed to compile PostgreSQL server extension.


pkgId: 1ac7c245f55f04d049b3c71504c958f1760dcb8adeb41469784f916f6e1931f5
name: postgresql-test
arch: x86_64
version: 10.15
epoch: 0
release: 1.module+el8.3.0+8944+1ca16b1f
summary: The test suite distributed with PostgreSQL
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: EuroLinux
rpm_group: Applications/Databases
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: postgresql-10.15-1.module+el8.3.0+8944+1ca16b1f.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postgresql-test-10.15-1.module+el8.3.0+8944+1ca16b1f.x86_64.rpm
checksum_type: sha256
description:
  The postgresql-test package contains files needed for various tests for the
  PostgreSQL database management system, including regression tests and
  benchmarks.


pkgId: 5456a810a35cbcc639baa0e29e92a12f3398e6e153effc352d60da389dd81996
name: postgresql-test-rpm-macros
arch: x86_64
version: 10.15
epoch: 0
release: 1.module+el8.3.0+8944+1ca16b1f
summary: Convenience RPM macros for build-time testing against PostgreSQL server
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: EuroLinux
rpm_group: Applications/Databases
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: postgresql-10.15-1.module+el8.3.0+8944+1ca16b1f.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postgresql-test-rpm-macros-10.15-1.module+el8.3.0+8944+1ca16b1f.x86_64.rpm
checksum_type: sha256
description:
  This package is meant to be added as BuildRequires: dependency of other packages
  that want to run build-time testsuite against running PostgreSQL server.


pkgId: 5b8afc8a61271d5bd05e6e3db69bf3d57a58c00834edb2c5eb1393afb6dc5302
name: postgresql-upgrade
arch: x86_64
version: 10.15
epoch: 0
release: 1.module+el8.3.0+8944+1ca16b1f
summary: Support for upgrading from the previous major release of PostgreSQL
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: EuroLinux
rpm_group: Applications/Databases
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: postgresql-10.15-1.module+el8.3.0+8944+1ca16b1f.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postgresql-upgrade-10.15-1.module+el8.3.0+8944+1ca16b1f.x86_64.rpm
checksum_type: sha256
description:
  The postgresql-upgrade package contains the pg_upgrade utility and supporting
  files needed for upgrading a PostgreSQL database from the previous major
  version of PostgreSQL.


pkgId: ead06c580ab63bf8a87ed0512a087416c014c1ac02752993a916766ca81b26b8
name: postgresql-upgrade-devel
arch: x86_64
version: 10.15
epoch: 0
release: 1.module+el8.3.0+8944+1ca16b1f
summary: Support for build of extensions required for upgrade process
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: postgresql-10.15-1.module+el8.3.0+8944+1ca16b1f.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/postgresql-upgrade-devel-10.15-1.module+el8.3.0+8944+1ca16b1f.x86_64.rpm
checksum_type: sha256
description:
  The postgresql-devel package contains the header files and libraries
  needed to compile C or C++ applications which are necessary in upgrade
  process.


pkgId: ca923c9269503d6d2d5d54348b564da65088eabf3a62ec82fc9e334866ea3df2
name: potrace
arch: i686
version: 1.15
epoch: 0
release: 3.el8
summary: Transform bitmaps into vector graphics
url: http://potrace.sourceforge.net
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: Applications/Multimedia
rpm_buildhost: i686.ab.2
rpm_sourcerpm: potrace-1.15-3.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/potrace-1.15-3.el8.i686.rpm
checksum_type: sha256
description:
  Potrace is a utility for tracing a bitmap, which means, transforming a bitmap
  into a smooth, scalable image. The input is a bitmap (PBM, PGM, PPM, or BMP
  format), and the default output is an encapsulated PostScript file (EPS).
  A typical use is to create EPS files from scanned data, such as company or
  university logos, handwritten notes, etc. The resulting image is not "jaggy"
  like a bitmap, but smooth. It can then be rendered at any resolution.

  Potrace can currently produce the following output formats: EPS, PostScript,
  PDF, SVG (scalable vector graphics), Xfig, Gimppath, and PGM (for easy
  antialiasing). Additional backends might be added in the future.

  Mkbitmap is a program distributed with Potrace which can be used to pre-process
  the input for better tracing behavior on greyscale and color images.


pkgId: cd35968562653a94132228fc2a748156c1b0e4da9366df56ecee9e064554eac4
name: powertop
arch: x86_64
version: 2.12
epoch: 0
release: 2.el8
summary: Power consumption monitor
url: http://01.org/powertop/
rpm_license: GPLv2
rpm_vendor: EuroLinux
rpm_group: Applications/System
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: powertop-2.12-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/powertop-2.12-2.el8.x86_64.rpm
checksum_type: sha256
description:
  PowerTOP is a tool that finds the software component(s) that make your
  computer use more power than necessary while it is idle.


pkgId: 53245354e84671ec726f75275efdb43d376085ae0a4a2614f33ce5bd8ba4f3c4
name: pptp
arch: x86_64
version: 1.10.0
epoch: 0
release: 4.el8
summary: Point-to-Point Tunneling Protocol (PPTP) Client
url: http://pptpclient.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: Applications/Internet
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pptp-1.10.0-4.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pptp-1.10.0-4.el8.x86_64.rpm
checksum_type: sha256
description:
  Client for the proprietary Microsoft Point-to-Point Tunneling
  Protocol, PPTP. Allows connection to a PPTP based VPN as used
  by employers and some cable and ADSL service providers.


pkgId: d20e2c302cbad7d228e1364e1137c134a4e052ab4ccd16c92ea3e306d0e183bb
name: procmail
arch: x86_64
version: 3.22
epoch: 0
release: 47.el8
summary: Mail processing program
url: http://www.procmail.org
rpm_license: GPLv2+ or Artistic
rpm_vendor: EuroLinux
rpm_group: Applications/Internet
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: procmail-3.22-47.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/procmail-3.22-47.el8.x86_64.rpm
checksum_type: sha256
description:
  Procmail can be used to create mail-servers, mailing lists, sort your
  incoming mail into separate folders/files (real convenient when subscribing
  to one or more mailing lists or for prioritising your mail), preprocess
  your mail, start any programs upon mail arrival (e.g. to generate different
  chimes on your workstation for different types of mail) or selectively
  forward certain incoming mail automatically to someone.


pkgId: 0e624f1df1b3e345105f11bee9fe33727c99351479bea2a6a0bbe4e859516fc6
name: prometheus-jmx-exporter
arch: noarch
version: 0.12.0
epoch: 0
release: 6.el8
summary: Prometheus JMX Exporter
url: https://github.com/prometheus/jmx_exporter/
rpm_license: ASL 2.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: prometheus-jmx-exporter-0.12.0-6.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/prometheus-jmx-exporter-0.12.0-6.el8.noarch.rpm
checksum_type: sha256
description:
  JMX to Prometheus exporter: a collector that can be configured to scrape
  and expose MBeans of a JMX target. This exporter is intended to be run as
  a Java Agent, exposing a HTTP server and serving metrics of the local JVM.


pkgId: 202830968ba8d0159eecac0d7ddf29f61207ac47c5b8a3d82a64af1689fa606f
name: protobuf
arch: i686
version: 3.5.0
epoch: 0
release: 13.el8
summary: Protocol Buffers - Google's data interchange format
url: https://github.com/google/protobuf
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: i686.ab.2
rpm_sourcerpm: protobuf-3.5.0-13.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/protobuf-3.5.0-13.el8.i686.rpm
checksum_type: sha256
description:
  Protocol Buffers are a way of encoding structured data in an efficient
  yet extensible format. Google uses Protocol Buffers for almost all of
  its internal RPC protocols and file formats.

  Protocol buffers are a flexible, efficient, automated mechanism for
  serializing structured data – think XML, but smaller, faster, and
  simpler. You define how you want your data to be structured once, then
  you can use special generated source code to easily write and read
  your structured data to and from a variety of data streams and using a
  variety of languages. You can even update your data structure without
  breaking deployed programs that are compiled against the "old" format.


pkgId: 901102720b4195d12bd4959f66206c3d3cd4c232229f83e7f32986bdcc768c04
name: protobuf-c
arch: i686
version: 1.3.0
epoch: 0
release: 4.el8
summary: C bindings for Google's Protocol Buffers
url: https://github.com/protobuf-c/protobuf-c
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: i686.ab.2
rpm_sourcerpm: protobuf-c-1.3.0-4.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/protobuf-c-1.3.0-4.el8.i686.rpm
checksum_type: sha256
description:
  Protocol Buffers are a way of encoding structured data in an efficient yet
  extensible format. This package provides a code generator and run-time
  libraries to use Protocol Buffers from pure C (not C++).

  It uses a modified version of protoc called protoc-c.


pkgId: 2d451df476290a5734b87bfab9fb8c7deb871323de96c7846f56166d98ed028e
name: protobuf-c-compiler
arch: i686
version: 1.3.0
epoch: 0
release: 6.el8
summary: Protocol Buffers C compiler
url: https://github.com/protobuf-c/protobuf-c
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: EuroLinux-el8-build96
rpm_sourcerpm: protobuf-c-1.3.0-6.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/protobuf-c-compiler-1.3.0-6.el8.i686.rpm
checksum_type: sha256
description:
  This package contains a modified version of the Protocol Buffers
  compiler for the C programming language called protoc-c.


pkgId: e50fd3ae2528467c4031f9a0ab7c15da2b74ced6e57a4b5c8fdd3ff63586d4ab
name: protobuf-lite
arch: i686
version: 3.5.0
epoch: 0
release: 13.el8
summary: Protocol Buffers LITE_RUNTIME libraries
url: https://github.com/google/protobuf
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: i686.ab.2
rpm_sourcerpm: protobuf-3.5.0-13.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/protobuf-lite-3.5.0-13.el8.i686.rpm
checksum_type: sha256
description:
  Protocol Buffers built with optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: 12442c5eb80b8e6a14f21094bd44c13be9e07fa4989c5aee90f9185f0e079b61
name: pulseaudio
arch: x86_64
version: 13.99.1
epoch: 0
release: 1.el8
summary: Improved Linux Sound Server
url: http://www.freedesktop.org/wiki/Software/PulseAudio
rpm_license: LGPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pulseaudio-13.99.1-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pulseaudio-13.99.1-1.el8.x86_64.rpm
checksum_type: sha256
description:
  PulseAudio is a sound server for Linux and other Unix like operating
  systems. It is intended to be an improved drop-in replacement for the
  Enlightened Sound Daemon (ESOUND).


pkgId: 547cc7c93e9ac4acae59b544752440c1af14b5a03bfa6403f04f4b8222dccbd3
name: pulseaudio-libs
arch: i686
version: 13.99.1
epoch: 0
release: 1.el8
summary: Libraries for PulseAudio clients
url: http://www.freedesktop.org/wiki/Software/PulseAudio
rpm_license: LGPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: i686.ab.2
rpm_sourcerpm: pulseaudio-13.99.1-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pulseaudio-libs-13.99.1-1.el8.i686.rpm
checksum_type: sha256
description:
  This package contains the runtime libraries for any application that wishes
  to interface with a PulseAudio sound server.


pkgId: 079c41093bad8b25c17432f72db5b77a14e4bab9b1a1f124e3874a8882fc5100
name: pulseaudio-libs-devel
arch: i686
version: 13.99.1
epoch: 0
release: 1.el8
summary: Headers and libraries for PulseAudio client development
url: http://www.freedesktop.org/wiki/Software/PulseAudio
rpm_license: LGPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: i686.ab.2
rpm_sourcerpm: pulseaudio-13.99.1-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pulseaudio-libs-devel-13.99.1-1.el8.i686.rpm
checksum_type: sha256
description:
  Headers and libraries for developing applications that can communicate with
  a PulseAudio sound server.


pkgId: a298ab732f57cd165e03370f14a4252287b6eb8c07b65fc7dc3a48a78df4a324
name: pulseaudio-libs-glib2
arch: i686
version: 13.99.1
epoch: 0
release: 1.el8
summary: GLIB 2.x bindings for PulseAudio clients
url: http://www.freedesktop.org/wiki/Software/PulseAudio
rpm_license: LGPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: i686.ab.2
rpm_sourcerpm: pulseaudio-13.99.1-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pulseaudio-libs-glib2-13.99.1-1.el8.i686.rpm
checksum_type: sha256
description:
  This package contains bindings to integrate the PulseAudio client library with
  a GLIB 2.x based application.


pkgId: e39912fbc2cb9bece2361ffb46e2d15c42c2779e88060cf650499ea1e8248103
name: purple-sipe
arch: x86_64
version: 1.23.2
epoch: 0
release: 1.el8
summary: Libpurple protocol plugin to connect to MS Office Communicator
url: http://sipe.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: Applications/Communications
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pidgin-sipe-1.23.2-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/purple-sipe-1.23.2-1.el8.x86_64.rpm
checksum_type: sha256
description:
  A third-party plugin for the Pidgin multi-protocol instant messenger.
  It implements the extended version of SIP/SIMPLE used by various products:

      * Skype for Business
      * Microsoft Office 365
      * Microsoft Business Productivity Online Suite (BPOS)
      * Microsoft Lync Server
      * Microsoft Office Communications Server (OCS 2007/2007 R2)
      * Microsoft Live Communications Server (LCS 2003/2005)

  This package provides the protocol plugin for libpurple clients.


pkgId: e33ac57e3df1885cf52b2aae68e36c66d732ed29a8e71c7cec83eb24e33054b6
name: pygobject2
arch: x86_64
version: 2.28.7
epoch: 0
release: 4.module+el8+2760+3d7d61b2
summary: Python 2 bindings for GObject
url: http://www.pygtk.org/
rpm_license: LGPLv2+, MIT
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-spinning
rpm_sourcerpm: pygobject2-2.28.7-4.module+el8+2760+3d7d61b2.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pygobject2-2.28.7-4.module+el8+2760+3d7d61b2.x86_64.rpm
checksum_type: sha256
description:
  The pygobject2 package provides a convenient wrapper for the GObject library
  for use in Python programs.


pkgId: 5aa19273c84b7f0b901d6ad993db80be99862151af5f3387ae8dc6f1f78deef0
name: pygobject2-devel
arch: x86_64
version: 2.28.7
epoch: 0
release: 4.module+el8+2760+3d7d61b2
summary: Development files for building add-on libraries
url: http://www.pygtk.org/
rpm_license: LGPLv2+, MIT
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-spinning
rpm_sourcerpm: pygobject2-2.28.7-4.module+el8+2760+3d7d61b2.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pygobject2-devel-2.28.7-4.module+el8+2760+3d7d61b2.x86_64.rpm
checksum_type: sha256
description:
  This package contains files required to build wrappers for pygobject2-based
  libraries such as pygtk2.


pkgId: e0aeda4789982abaeb9cbee6103c6053c957cacf17dfe870894b815b9ffbd098
name: pygtk2
arch: x86_64
version: 2.24.0
epoch: 0
release: 24.module+el8+2760+3d7d61b2
summary: Python bindings for GTK+
url: http://www.pygtk.org/
rpm_license: LGPLv2+
rpm_vendor: EuroLinux
rpm_group: Development/Languages
rpm_buildhost: eurolinux-build-spinning
rpm_sourcerpm: pygtk2-2.24.0-24.module+el8+2760+3d7d61b2.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pygtk2-2.24.0-24.module+el8+2760+3d7d61b2.x86_64.rpm
checksum_type: sha256
description:
  PyGTK is an extension module for Python that gives you access to the GTK+
  widget set.  Just about anything you can write in C with GTK+ you can write
  in Python with PyGTK (within reason), but with all the benefits of using a
  high-level scripting language.


pkgId: 66c52b880a6b8fec0b84cd858bcf399954b3fd26bc2a05d9efbeb4bb5b0e1865
name: pygtk2-devel
arch: x86_64
version: 2.24.0
epoch: 0
release: 24.module+el8+2760+3d7d61b2
summary: Development files for building add-on libraries
url: http://www.pygtk.org/
rpm_license: LGPLv2+
rpm_vendor: EuroLinux
rpm_group: Development/Languages
rpm_buildhost: eurolinux-build-spinning
rpm_sourcerpm: pygtk2-2.24.0-24.module+el8+2760+3d7d61b2.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pygtk2-devel-2.24.0-24.module+el8+2760+3d7d61b2.x86_64.rpm
checksum_type: sha256
description:
  This package contains files required to build wrappers for GTK+ add-on
  libraries so that they interoperate with pygtk.


pkgId: 5692f476cbed561568f7c337d2c39a4512c7287acd58b55d562ff1345b78f600
name: pykickstart
arch: noarch
version: 3.16.11
epoch: 0
release: 1.el8
summary: Python utilities for manipulating kickstart files.
url: https://github.com/pykickstart/pykickstart
rpm_license: GPLv2 and MIT
rpm_vendor: EuroLinux
rpm_group: System Environment/Libraries
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: pykickstart-3.16.11-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/pykickstart-3.16.11-1.el8.noarch.rpm
checksum_type: sha256
description:
  Python utilities for manipulating kickstart files.  The Python 2 and 3 libraries
  can be found in the packages python-kickstart and python3-kickstart
  respectively.


pkgId: 67d8ab3a830e065d4366a8e62985f2b619e3cce66192483b3140b8d1a4db914c
name: python-rpm-macros
arch: noarch
version: 3
epoch: 0
release: 39.el8
summary: The unversioned Python RPM macros
rpm_license: MIT
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: python-rpm-macros-3-39.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python-rpm-macros-3-39.el8.noarch.rpm
checksum_type: sha256
description:
  This package contains the unversioned Python RPM macros, that most
  implementations should rely on.

  You should not need to install this package manually as the various
  python?-devel packages require it. So install a python-devel package instead.


pkgId: f31d1a9df8d1dcde45a5bcb2db6318dec2571148ca1b71293375ab849df057ee
name: python2
arch: x86_64
version: 2.7.17
epoch: 0
release: 2.module+el8.3.0+7681+f1f02ded
summary: An interpreted, interactive, object-oriented programming language
url: https://www.python.org/
rpm_license: Python
rpm_vendor: EuroLinux
rpm_group: Development/Languages
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: python2-2.7.17-2.module+el8.3.0+7681+f1f02ded.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-2.7.17-2.module+el8.3.0+7681+f1f02ded.x86_64.rpm
checksum_type: sha256
description:
  Python 2 is an old version of the language that is incompatible with the 3.x
  line of releases. The language is mostly the same, but many details, especially
  how built-in objects like dictionaries and strings work, have changed
  considerably, and a lot of deprecated features have finally been removed in the
  3.x line.

  Note that documentation for Python 2 is provided in the python2-docs
  package.

  This package provides the "python2" executable; most of the actual
  implementation is within the "python2-libs" package.
  For the unversioned "python" executable, see manual page "unversioned-python".


pkgId: 72ede4f2693b685ced4245e1ab32e5b1f1c5f38becce378f44e762f84cac0264
name: python2-Cython
arch: x86_64
version: 0.28.1
epoch: 0
release: 7.module+el8.1.0+3111+de3f2d8e
summary: Language for writing Python extension modules
url: http://www.cython.org
rpm_license: ASL 2.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: Cython-0.28.1-7.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-Cython-0.28.1-7.module+el8.1.0+3111+de3f2d8e.x86_64.rpm
checksum_type: sha256
description:
  This is a development version of Pyrex, a language
  for writing Python extension modules.

  Python 2 version.


pkgId: 01640901dea3638dbdc25c54ece4bf712fa619d4df77d1389f2c072a56444155
name: python2-PyMySQL
arch: noarch
version: 0.8.0
epoch: 0
release: 10.module+el8.1.0+3111+de3f2d8e
summary: Pure-Python MySQL client library
url: https://pypi.python.org/pypi/PyMySQL/
rpm_license: MIT
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-PyMySQL-0.8.0-10.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-PyMySQL-0.8.0-10.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  This package contains a pure-Python MySQL client library. The goal of PyMySQL is
  to be a drop-in replacement for MySQLdb and work on CPython, PyPy, IronPython
  and Jython.


pkgId: ad9e0bfb73156566278c2c4c2be16eb9a808587d47c97b4d7b7140c002943388
name: python2-attrs
arch: noarch
version: 17.4.0
epoch: 0
release: 10.module+el8.1.0+3111+de3f2d8e
summary: Python attributes without boilerplate
url: http://www.attrs.org/
rpm_license: MIT
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-attrs-17.4.0-10.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-attrs-17.4.0-10.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  attrs is an MIT-licensed Python package with class decorators that
  ease the chores of implementing the most common attribute-related
  object protocols.


pkgId: c8696bd95988df7e45db5d150ad95d3f38317018dbb510e8c2ca2bb658d68ccf
name: python2-backports
arch: x86_64
version: 1.0
epoch: 0
release: 15.module+el8.1.0+3111+de3f2d8e
summary: Namespace for backported Python features
url: https://pypi.python.org/pypi/backports
rpm_license: Public Domain
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: python-backports-1.0-15.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-backports-1.0-15.module+el8.1.0+3111+de3f2d8e.x86_64.rpm
checksum_type: sha256
description:
  The backports namespace is a namespace reserved for features backported from
  the Python standard library to older versions of Python 2.

  Packages that exist in the backports namespace in Fedora should not provide
  their own backports/__init__.py, but instead require this package.

  Backports to earlier versions of Python 3, if they exist, do not need this
  package because of changes made in Python 3.3 in PEP 420
  (http://www.python.org/dev/peps/pep-0420/).


pkgId: fd8dbc021a285ad51b98cd2d111027c2df1d4043cc862a317f8705b3f9e82f6c
name: python2-backports-ssl_match_hostname
arch: noarch
version: 3.5.0.1
epoch: 0
release: 11.module+el8.1.0+3111+de3f2d8e
summary: The ssl.match_hostname() function from Python 3
url: https://bitbucket.org/brandon/backports.ssl_match_hostname
rpm_license: Python
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: python-backports-ssl_match_hostname-3.5.0.1-11.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-backports-ssl_match_hostname-3.5.0.1-11.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  The Secure Sockets layer is only actually secure if you check the hostname in
  the certificate returned by the server to which you are connecting, and verify
  that it matches to hostname that you are trying to reach.

  But the matching logic, defined in RFC2818, can be a bit tricky to implement on
  your own. So the ssl package in the Standard Library of Python 3.2 now includes
  a match_hostname() function for performing this check instead of requiring
  every application to implement the check separately.

  This backport brings match_hostname() to users of earlier versions of Python.
  The actual code is only slightly modified from Python 3.5.


pkgId: 4986d3a5782be6331f30870325493f3f25f7b38028aad85f9bfa9e3e104ae357
name: python2-bson
arch: x86_64
version: 3.6.1
epoch: 0
release: 11.module+el8.1.0+3446+c3d52da3
summary: Python bson library
url: http://api.mongodb.org/python
rpm_license: ASL 2.0 and MIT
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-pymongo-3.6.1-11.module+el8.1.0+3446+c3d52da3.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-bson-3.6.1-11.module+el8.1.0+3446+c3d52da3.x86_64.rpm
checksum_type: sha256
description:
  BSON is a binary-encoded serialization of JSON-like documents. BSON is designed
  to be lightweight, traversable, and efficient. BSON, like JSON, supports the
  embedding of objects and arrays within other objects and arrays.


pkgId: 3977bbf5c499f75f48b29c20a64dc3f4b11de9b854e9501118e18df2d2d6a7d1
name: python2-cairo-devel
arch: x86_64
version: 1.16.3
epoch: 0
release: 6.module+el8+2760+3d7d61b2
summary: Libraries and headers for py2cairo
url: http://cairographics.org/pycairo
rpm_license: MPLv1.1 or LGPLv2
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-spinning
rpm_sourcerpm: python2-pycairo-1.16.3-6.module+el8+2760+3d7d61b2.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-cairo-devel-1.16.3-6.module+el8+2760+3d7d61b2.x86_64.rpm
checksum_type: sha256
description:
  This package contains files required to build wrappers for cairo add-on
  libraries so that they interoperate with py2cairo.


pkgId: 937f18bbaa1d387311a24a5635916d4654e37660808202a10516296c49ddaa54
name: python2-coverage
arch: x86_64
version: 4.5.1
epoch: 0
release: 4.module+el8.1.0+3111+de3f2d8e
summary: Code coverage testing module for Python 2
url: http://nedbatchelder.com/code/modules/coverage.html
rpm_license: ASL 2.0 and MIT and (MIT or GPL)
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-coverage-4.5.1-4.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-coverage-4.5.1-4.module+el8.1.0+3111+de3f2d8e.x86_64.rpm
checksum_type: sha256
description:
  Coverage.py is a Python 2 module that measures code coverage during Python
  execution. It uses the code analysis tools and tracing hooks provided in the
  Python standard library to determine which lines are executable, and which
  have been executed.


pkgId: 80bd856c4dbde919e0f32bdd6086f071ba0d48860e2881559f88cb44c7481850
name: python2-debug
arch: x86_64
version: 2.7.17
epoch: 0
release: 2.module+el8.3.0+7681+f1f02ded
summary: Debug version of the Python 2 runtime
url: https://www.python.org/
rpm_license: Python
rpm_vendor: EuroLinux
rpm_group: Applications/System
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: python2-2.7.17-2.module+el8.3.0+7681+f1f02ded.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-debug-2.7.17-2.module+el8.3.0+7681+f1f02ded.x86_64.rpm
checksum_type: sha256
description:
  python2-debug provides a version of the Python 2 runtime with numerous debugging
  features enabled, aimed at advanced Python users, such as developers of Python
  extension modules.

  This version uses more memory and will be slower than the regular Python 2 build,
  but is useful for tracking down reference-counting issues, and other bugs.

  The bytecodes are unchanged, so that .pyc files are compatible between the two
  version of Python 2, but the debugging features mean that C/C++ extension modules
  are ABI-incompatible with those built for the standard runtime.

  It shares installation directories with the standard Python 2 runtime, so that
  .py and .pyc files can be shared.  All compiled extension modules gain a "_d"
  suffix ("foo_d.so" rather than "foo.so") so that each Python 2 implementation can
  load its own extensions.


pkgId: 046d0f90a041e5be53f086547905d158d19703cc301468960000501a13586b2d
name: python2-devel
arch: x86_64
version: 2.7.17
epoch: 0
release: 2.module+el8.3.0+7681+f1f02ded
summary: Libraries and header files needed for Python 2 development
url: https://www.python.org/
rpm_license: Python
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: python2-2.7.17-2.module+el8.3.0+7681+f1f02ded.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-devel-2.7.17-2.module+el8.3.0+7681+f1f02ded.x86_64.rpm
checksum_type: sha256
description:
  This package contains libraries and header files used to build applications
  with and native libraries for Python 2


pkgId: 106800627568e320e3965e5d4b42526f699cea4feeca41bc60a4d6c24bb29f07
name: python2-dns
arch: noarch
version: 1.15.0
epoch: 0
release: 10.module+el8.1.0+3111+de3f2d8e
summary: DNS toolkit for Python 2
url: http://www.dnspython.org/
rpm_license: MIT
rpm_vendor: EuroLinux
rpm_group: Development/Languages
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-dns-1.15.0-10.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-dns-1.15.0-10.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  dnspython is a DNS toolkit for Python. It supports almost all record
  types. It can be used for queries, zone transfers, and dynamic
  updates. It supports TSIG authenticated messages and EDNS0.

  dnspython provides both high and low level access to DNS. The high
  level classes perform queries for data of a given name, type, and
  class, and return an answer set. The low level classes allow direct
  manipulation of DNS zones, messages, names, and records.


pkgId: 0fe41c0ced86222f9644462028db2384e50ff2ef17c453c6d0415bcd7f7043c7
name: python2-docs
arch: noarch
version: 2.7.16
epoch: 0
release: 2.module+el8.1.0+3111+de3f2d8e
summary: Documentation for the Python 2 programming language
url: https://www.python.org/
rpm_license: Python
rpm_vendor: EuroLinux
rpm_group: Documentation
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-docs-2.7.16-2.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-docs-2.7.16-2.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  The python2-docs package contains documentation on the Python 2
  programming language and interpreter.

  Install the python2-docs package if you'd like to use the documentation
  for the Python 2 language.


pkgId: 3d74512e9179d99bdcc6c8cc84cf3b10175a6a4055b67c6a4204a2a71111a2dc
name: python2-docs-info
arch: noarch
version: 2.7.16
epoch: 0
release: 2.module+el8.1.0+3111+de3f2d8e
summary: Documentation for the Python 2 programming language as info pages
url: https://www.python.org/
rpm_license: Python
rpm_vendor: EuroLinux
rpm_group: Documentation
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-docs-2.7.16-2.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-docs-info-2.7.16-2.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  The python2-docs-info package contains documentation on the Python 2
  programming language and interpreter as info pages.

  Install the python2-docs-info package if you'd like to read the
  documentation for the Python 2 language using the info command or Emacs.


pkgId: a62459e8057969e9be39ed3221f203085bfcdc3c70bb2fbd5f60ea3244d65a78
name: python2-docutils
arch: noarch
version: 0.14
epoch: 0
release: 12.module+el8.1.0+3111+de3f2d8e
summary: System for processing plaintext documentation for python2
url: http://docutils.sourceforge.net
rpm_license: Public Domain and BSD and Python and GPLv3+
rpm_vendor: EuroLinux
rpm_group: Development/Languages
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-docutils-0.14-12.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-docutils-0.14-12.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  The Docutils project specifies a plaintext markup language, reStructuredText,
  which is easy to read and quick to write.  The project includes a python
  library to parse rST files and transform them into other useful formats such
  as HTML, XML, and TeX as well as commandline tools that give the enduser
  access to this functionality.

  Currently, the library supports parsing rST that is in standalone files and
  PEPs (Python Enhancement Proposals).  Work is underway to parse rST from
  Python inline documentation modules and packages.


pkgId: 1c30a5f37fe3d1e20e23fc3f2af80e0b91163b56d401541334f28981b105cdf6
name: python2-funcsigs
arch: noarch
version: 1.0.2
epoch: 0
release: 13.module+el8.1.0+3111+de3f2d8e
summary: Python function signatures from PEP362 for Python 2.6, 2.7 and 3.2+
url: https://github.com/testing-cabal/funcsigs?
rpm_license: ASL 2.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-funcsigs-1.0.2-13.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-funcsigs-1.0.2-13.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  funcsigs is a backport of the PEP 362 function signature features from
  Python 3.3's inspect module. The backport is compatible with Python 2.6, 2.7
  as well as 3.2 and up.


pkgId: 94b1111b1fe49faff4d8f29e10e53a9995b0eaa59a625a8b9a7b54eeb1c2c51b
name: python2-idna
arch: noarch
version: 2.5
epoch: 0
release: 7.module+el8.1.0+3111+de3f2d8e
summary: Internationalized Domain Names in Applications (IDNA)
url: https://github.com/kjd/idna
rpm_license: BSD and Python and Unicode
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-idna-2.5-7.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-idna-2.5-7.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  A library to support the Internationalised Domain Names in Applications (IDNA)
  protocol as specified in RFC 5891 <http://tools.ietf.org/html/rfc5891>.  This
  version of the protocol is often referred to as "IDNA2008" and can produce
  different results from the earlier standard from 2003.

  The library is also intended to act as a suitable drop-in replacement for the
  "encodings.idna" module that comes with the Python standard library but
  currently only supports the older 2003 specification.


pkgId: 262819e2d04bfef4468b4f951e9fdde4181f4ba06ec3bf64eb36ce5bf70a8093
name: python2-ipaddress
arch: noarch
version: 1.0.18
epoch: 0
release: 6.module+el8.1.0+3111+de3f2d8e
summary: Port of the python 3.3+ ipaddress module to 2.6+
url: https://pypi.python.org/pypi/ipaddress/
rpm_license: Python
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-ipaddress-1.0.18-6.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-ipaddress-1.0.18-6.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  ipaddress provides the capabilities to create, manipulate and operate
  on IPv4 and IPv6 addresses and networks.

  The functions and classes in this module make it straightforward to
  handle various tasks related to IP addresses, including checking
  whether or not two hosts are on the same subnet, iterating over all
  hosts in a particular subnet, checking whether or not a string
  represents a valid IP address or network definition, and so on.


pkgId: 81ef40e0eaddc7b13fe38c7848428466a4b52cb9b9324e5061a38a6e46127055
name: python2-jinja2
arch: noarch
version: 2.10
epoch: 0
release: 8.module+el8.1.0+3111+de3f2d8e
summary: General purpose template engine for python2
url: http://jinja.pocoo.org/
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: Development/Languages
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-jinja2-2.10-8.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-jinja2-2.10-8.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  Jinja2 is a template engine written in pure Python.  It provides a
  Django inspired non-XML syntax but supports inline expressions and an
  optional sandboxed environment.

  If you have any exposure to other text-based template languages, such
  as Smarty or Django, you should feel right at home with Jinja2. It's
  both designer and developer friendly by sticking to Python's
  principles and adding functionality useful for templating
  environments.


pkgId: 811c677b990101886ea74dda092714ebb12520e7f2be3cfd590a4b1bb0b39e56
name: python2-lxml
arch: x86_64
version: 4.2.3
epoch: 0
release: 3.module+el8.1.0+3111+de3f2d8e
summary: XML processing library combining libxml2/libxslt with the ElementTree API
url: http://lxml.de
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: python-lxml-4.2.3-3.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-lxml-4.2.3-3.module+el8.1.0+3111+de3f2d8e.x86_64.rpm
checksum_type: sha256
description:
  lxml is a Pythonic, mature binding for the libxml2 and libxslt libraries. It
  provides safe and convenient access to these libraries using the ElementTree It
  extends the ElementTree API significantly to offer support for XPath, RelaxNG,
  XML Schema, XSLT, C14N and much more.To contact the project, go to the project
  home page < or see our bug tracker at case you want to use the current ...

  Python 2 version.


pkgId: 7f13e670f326f562078f6c98804a9d373b40906e2a2425f5b4b35683e181c5bd
name: python2-mock
arch: noarch
version: 2.0.0
epoch: 0
release: 13.module+el8.1.0+3111+de3f2d8e
summary: A Python Mocking and Patching Library for Testing
url: http://www.voidspace.org.uk/python/mock/
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-mock-2.0.0-13.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-mock-2.0.0-13.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  Mock is a Python module that provides a core mock class. It removes the need
  to create a host of stubs throughout your test suite. After performing an
  action, you can make assertions about which methods / attributes were used and
  arguments they were called with. You can also specify return values and set


pkgId: 9e3dc25fc196b3704cac9cc44697742abf22f7bbbe36c51f3424bd3c265343ed
name: python2-nose
arch: noarch
version: 1.3.7
epoch: 0
release: 30.module+el8.1.0+3111+de3f2d8e
summary: Nose Documentation
url: https://nose.readthedocs.org/en/latest/
rpm_license: LGPLv2+ and Public Domain
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-nose-1.3.7-30.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-nose-1.3.7-30.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  nose extends the test loading and running features of unit test, making
  it easier to write, find and run tests.

  By default, nose will run tests in files or directories under the
  current working directory whose names include "test" or "Test" at a
  word boundary (like "test_this" or "functional_test" or "TestClass"
  but not "libtest"). Test output is similar to that of unit test, but
  also includes captured stdout output from failing tests, for easy
  print-style debugging.

  These features, and many more, are customizable through the use of
  plugins. Plugins included with nose provide support for doctest, code
  coverage and profiling, flexible attribute-based test selection,
  output capture and more.


pkgId: 51992b25351ecd69bd88b3c9dcc4b2d91335840a0a5098462f7c6358fda7d2bc
name: python2-numpy
arch: x86_64
version: 1.14.2
epoch: 1
release: 13.module+el8.1.0+3323+7ac3e00f
summary: A fast multidimensional array facility for Python
url: http://www.numpy.org/
rpm_license: BSD and Python
rpm_vendor: EuroLinux
rpm_group: Development/Languages
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: numpy-1.14.2-13.module+el8.1.0+3323+7ac3e00f.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-numpy-1.14.2-13.module+el8.1.0+3323+7ac3e00f.x86_64.rpm
checksum_type: sha256
description:
  NumPy is a general-purpose array-processing package designed to
  efficiently manipulate large multi-dimensional arrays of arbitrary
  records without sacrificing too much speed for small multi-dimensional
  arrays.  NumPy is built on the Numeric code base and adds features
  introduced by numarray as well as an extended C-API and the ability to
  create arrays of arbitrary type.

  There are also basic facilities for discrete fourier transform,
  basic linear algebra and random number generation. Also included in
  this package is a version of f2py that works properly with NumPy.


pkgId: 80f8b3253e2bb236a47644c84c0f40ba379ad958e46b7cd0e3013822717c1b6c
name: python2-pip
arch: noarch
version: 9.0.3
epoch: 0
release: 18.module+el8.3.0+7707+eb4bba01
summary: A tool for installing and managing Python 2 packages
url: http://www.pip-installer.org
rpm_license: MIT and Python and ASL 2.0 and BSD and ISC and LGPLv2 and MPLv2.0 and (ASL 2.0 or BSD)
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python2-pip-9.0.3-18.module+el8.3.0+7707+eb4bba01.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-pip-9.0.3-18.module+el8.3.0+7707+eb4bba01.noarch.rpm
checksum_type: sha256
description:
  pip is a package management system used to install and manage software packages
  written in Python. Many packages can be found in the Python Package Index
  (PyPI). pip is a recursive acronym that can stand for either "Pip Installs
  Packages" or "Pip Installs Python".


pkgId: de62c7ee5b54c37b6ca56e0fee08ca1cd35286cf54d78dee114ead3d3c72ef10
name: python2-psycopg2
arch: x86_64
version: 2.7.5
epoch: 0
release: 7.module+el8.1.0+3111+de3f2d8e
summary: A PostgreSQL database adapter for Python 2
url: http://www.psycopg.org/psycopg/
rpm_license: LGPLv3+ with exceptions
rpm_vendor: EuroLinux
rpm_group: Applications/Databases
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-psycopg2-2.7.5-7.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-psycopg2-2.7.5-7.module+el8.1.0+3111+de3f2d8e.x86_64.rpm
checksum_type: sha256
description:
  Psycopg is the most popular PostgreSQL adapter for the Python
  programming language. At its core it fully implements the Python DB
  API 2.0 specifications. Several extensions allow access to many of the
  features offered by PostgreSQL.


pkgId: 6ef8f87c22212135c1adcaef044da204cf72d56594952622bb1a2acc51534dc8
name: python2-psycopg2-tests
arch: x86_64
version: 2.7.5
epoch: 0
release: 7.module+el8.1.0+3111+de3f2d8e
summary: A testsuite for A PostgreSQL database adapter for Python 2
url: http://www.psycopg.org/psycopg/
rpm_license: LGPLv3+ with exceptions
rpm_vendor: EuroLinux
rpm_group: Applications/Databases
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-psycopg2-2.7.5-7.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-psycopg2-tests-2.7.5-7.module+el8.1.0+3111+de3f2d8e.x86_64.rpm
checksum_type: sha256
description:
  Psycopg is the most popular PostgreSQL adapter for the Python
  programming language. At its core it fully implements the Python DB
  API 2.0 specifications. Several extensions allow access to many of the
  features offered by PostgreSQL.
  This sub-package delivers set of tests for the adapter.


pkgId: c8b1042687ea48b1bf65607924a198077f951f51a91735b1d209d53b0af2f153
name: python2-py
arch: noarch
version: 1.5.3
epoch: 0
release: 6.module+el8.1.0+3111+de3f2d8e
summary: Library with cross-python path, ini-parsing, io, code, log facilities
url: http://pylib.readthedocs.io/en/stable/
rpm_license: MIT and Public Domain
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-py-1.5.3-6.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-py-1.5.3-6.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  The py lib is a Python development support library featuring the
  following tools and modules:

    * py.path: uniform local and svn path objects
    * py.apipkg: explicit API control and lazy-importing
    * py.iniconfig: easy parsing of .ini files
    * py.code: dynamic code generation and introspection
    * py.path: uniform local and svn path objects


pkgId: 0a45fddf0229ac77cac19812376e0a590f6bde1455fdad54fac1db980fe992de
name: python2-pygments
arch: noarch
version: 2.2.0
epoch: 0
release: 20.module+el8.1.0+3111+de3f2d8e
summary: Syntax highlighting engine written in Python
url: http://pygments.org/
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-pygments-2.2.0-20.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-pygments-2.2.0-20.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  Pygments is a generic syntax highlighter for general use in all kinds
  of software such as forum systems, wikis or other applications that
  need to prettify source code. Highlights are:

    * a wide range of common languages and markup formats is supported
    * special attention is paid to details that increase highlighting
      quality
    * support for new languages and formats are added easily; most
      languages use a simple regex-based lexing mechanism
    * a number of output formats is available, among them HTML, RTF,
      LaTeX and ANSI sequences
    * it is usable as a command-line tool and as a library
    * ... and it highlights even Brainf*ck!


pkgId: 6d6ff1a36dfe76a338169ca1c4698317e721aec05f68988d093fde00fbe19393
name: python2-pysocks
arch: noarch
version: 1.6.8
epoch: 0
release: 6.module+el8.1.0+3111+de3f2d8e
summary: A Python SOCKS client module
url: https://github.com/Anorov/PySocks
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-pysocks-1.6.8-6.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-pysocks-1.6.8-6.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  A fork of SocksiPy with bug fixes and extra features.

  Acts as a drop-in replacement to the socket module. Featuring:

  - SOCKS proxy client for Python 2.6 - 3.x
  - TCP and UDP both supported
  - HTTP proxy client included but not supported or recommended (you should use
    urllib2's or requests' own HTTP proxy interface)
  - urllib2 handler included.


pkgId: bf500bdc3616e24d33a79b2a7809f9b3651a4e95cab1c39ad48e545d07e8ecae
name: python2-pytest-mock
arch: noarch
version: 1.9.0
epoch: 0
release: 4.module+el8.1.0+3111+de3f2d8e
summary: Thin-wrapper around the mock package for easier use with py.test
url: https://pypi.python.org/pypi/pytest-mock
rpm_license: MIT
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-pytest-mock-1.9.0-4.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-pytest-mock-1.9.0-4.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  This plugin installs a mocker fixture which is a thin-wrapper around the
  patching API provided by the mock package, but with the benefit of not having
  to worry about undoing patches at the end of a test.


pkgId: f2fe3609dbb9ed28dc0a70e3a1c98d5069e1bc9036ae925bed691f1aecffa962
name: python2-pytz
arch: noarch
version: 2017.2
epoch: 0
release: 12.module+el8.1.0+3111+de3f2d8e
summary: World Timezone Definitions for Python
url: http://pytz.sourceforge.net/
rpm_license: MIT
rpm_vendor: EuroLinux
rpm_group: Development/Languages
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: pytz-2017.2-12.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-pytz-2017.2-12.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  pytz brings the Olson tz database into Python. This library allows accurate
  and cross platform timezone calculations using Python 2.3 or higher. It
  also solves the issue of ambiguous times at the end of daylight savings,
  which you can read more about in the Python Library Reference
  (datetime.tzinfo).

  Almost all (over 540) of the Olson timezones are supported.


pkgId: 553f0a0bbb83c19376f390e4613fa7bf7cb91ebabcfd0ebb35de68a044afc00d
name: python2-pyyaml
arch: x86_64
version: 3.12
epoch: 0
release: 16.module+el8.1.0+3111+de3f2d8e
summary: YAML parser and emitter for Python
url: http://pyyaml.org/
rpm_license: MIT
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: PyYAML-3.12-16.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-pyyaml-3.12-16.module+el8.1.0+3111+de3f2d8e.x86_64.rpm
checksum_type: sha256
description:
  YAML is a data serialization format designed for human readability and
  interaction with scripting languages.  PyYAML is a YAML parser and
  emitter for Python.

  PyYAML features a complete YAML 1.1 parser, Unicode support, pickle
  support, capable extension API, and sensible error messages.  PyYAML
  supports standard YAML tags and provides Python-specific tags that
  allow to represent an arbitrary Python object.

  PyYAML is applicable for a broad range of tasks from complex
  configuration files to object serialization and persistance.


pkgId: b63ecfe4a61b1fc0c881071f929c3705c392591da532b5fb9573e2745c8b996d
name: python2-requests
arch: noarch
version: 2.20.0
epoch: 0
release: 3.module+el8.2.0+4577+feefd9b8
summary: HTTP library, written in Python, for human beings
url: https://pypi.io/project/requests
rpm_license: ASL 2.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-requests-2.20.0-3.module+el8.2.0+4577+feefd9b8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-requests-2.20.0-3.module+el8.2.0+4577+feefd9b8.noarch.rpm
checksum_type: sha256
description:
  Most existing Python modules for sending HTTP requests are extremely verbose and
  cumbersome. Python’s built-in urllib2 module provides most of the HTTP
  capabilities you should need, but the API is thoroughly broken. This library is
  designed to make HTTP requests easy for developers.


pkgId: eb8f5cfaa923940e9be4550d71814b1c1ed57f9286a99c1423a1027260cfceb3
name: python2-scipy
arch: x86_64
version: 1.0.0
epoch: 0
release: 20.module+el8.1.0+3323+7ac3e00f
summary: Scientific Tools for Python
url: http://www.scipy.org/scipylib/index.html
rpm_license: BSD and Boost and Public Domain
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: scipy-1.0.0-20.module+el8.1.0+3323+7ac3e00f.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-scipy-1.0.0-20.module+el8.1.0+3323+7ac3e00f.x86_64.rpm
checksum_type: sha256
description:
  Scipy is open-source software for mathematics, science, and
  engineering. The core library is NumPy which provides convenient and
  fast N-dimensional array manipulation. The SciPy library is built to
  work with NumPy arrays, and provides many user-friendly and efficient
  numerical routines such as routines for numerical integration and
  optimization. Together, they run on all popular operating systems, are
  quick to install, and are free of charge. NumPy and SciPy are easy to
  use, but powerful enough to be depended upon by some of the world's
  leading scientists and engineers.


pkgId: f4c10875348146901734abbd7bc9f70c8363b8e88a80eb34b0eef7ef2e7c638b
name: python2-setuptools
arch: noarch
version: 39.0.1
epoch: 0
release: 12.module+el8.3.0+7075+8484f0d0
summary: Easily build and distribute Python packages
url: https://pypi.python.org/pypi/setuptools
rpm_license: MIT
rpm_vendor: EuroLinux
rpm_group: Applications/System
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: python2-setuptools-39.0.1-12.module+el8.3.0+7075+8484f0d0.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-setuptools-39.0.1-12.module+el8.3.0+7075+8484f0d0.noarch.rpm
checksum_type: sha256
description:
  Setuptools is a collection of enhancements to the Python distutils that allow
  you to more easily build and distribute Python packages, especially ones that
  have dependencies on other packages.

  This package also contains the runtime components of setuptools, necessary to
  execute the software that requires pkg_resources.py.


pkgId: 98a98d0d4b7f0eeaa340c8ac42d43844ee6c617200d5c82ad83f7013f127a324
name: python2-setuptools_scm
arch: noarch
version: 1.15.7
epoch: 0
release: 6.module+el8.1.0+3111+de3f2d8e
summary: Blessed package to manage your versions by scm tags
url: https://pypi.python.org/pypi/setuptools_scm
rpm_license: MIT
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-setuptools_scm-1.15.7-6.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-setuptools_scm-1.15.7-6.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  Setuptools_scm handles managing your python package versions in scm metadata.
  It also handles file finders for the suppertes scms.


pkgId: 101b3377fbb587487bcf45b175918061633f46ae57d71e5fb5099719f8be3b03
name: python2-six
arch: noarch
version: 1.11.0
epoch: 0
release: 5.module+el8.1.0+3111+de3f2d8e
summary: Python 2 and 3 compatibility utilities
url: https://pypi.python.org/pypi/six
rpm_license: MIT
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: python-six-1.11.0-5.module+el8.1.0+3111+de3f2d8e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-six-1.11.0-5.module+el8.1.0+3111+de3f2d8e.noarch.rpm
checksum_type: sha256
description:
  python-six provides simple utilities for wrapping over differences between
  Python 2 and Python 3.
  Python 2 version.


pkgId: 5f87063b719309aefdfad06517bce2c0ebda57253226b54448b76814f04354ff
name: python2-sqlalchemy
arch: x86_64
version: 1.3.2
epoch: 0
release: 2.module+el8.3.0+6647+8d010749
summary: Modular and flexible ORM library for python
url: http://www.sqlalchemy.org/
rpm_license: MIT
rpm_vendor: EuroLinux
rpm_group: Development/Libraries
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-sqlalchemy-1.3.2-2.module+el8.3.0+6647+8d010749.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-sqlalchemy-1.3.2-2.module+el8.3.0+6647+8d010749.x86_64.rpm
checksum_type: sha256
description:
  SQLAlchemy is an Object Relational Mappper (ORM) that provides a flexible,
  high-level interface to SQL databases.  Database and domain concepts are
  decoupled, allowing both sides maximum flexibility and power. SQLAlchemy
  provides a powerful mapping layer that can work as automatically or as manually
  as you choose, determining relationships based on foreign keys or letting you
  define the join conditions explicitly, to bridge the gap between database and
  domain.

  This package includes the python 2 version of the module.


pkgId: 50c493fa9928ddf5489782991c0c0bfa973c5ccd4b4fd52f5337374efb9e6b0f
name: python2-test
arch: x86_64
version: 2.7.17
epoch: 0
release: 2.module+el8.3.0+7681+f1f02ded
summary: The test modules from the main python2 package
url: https://www.python.org/
rpm_license: Python
rpm_vendor: EuroLinux
rpm_group: Development/Languages
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: python2-2.7.17-2.module+el8.3.0+7681+f1f02ded.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-test-2.7.17-2.module+el8.3.0+7681+f1f02ded.x86_64.rpm
checksum_type: sha256
description:
  The test modules from the main python2 package: python2
  These have been removed to save space, as they are never or almost
  never used in production.

  You might want to install the python2-test package if you're developing python 2
  code that uses more than just unittest and/or test.support.


pkgId: 1db178fb7edc5f079ceef8b18c6af9a69089511e1bd7d6e86af60fbfebe6896e
name: python2-tkinter
arch: x86_64
version: 2.7.17
epoch: 0
release: 2.module+el8.3.0+7681+f1f02ded
summary: A graphical user interface for the Python 2 scripting language
url: https://www.python.org/
rpm_license: Python
rpm_vendor: EuroLinux
rpm_group: Development/Languages
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: python2-2.7.17-2.module+el8.3.0+7681+f1f02ded.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-tkinter-2.7.17-2.module+el8.3.0+7681+f1f02ded.x86_64.rpm
checksum_type: sha256
description:
  The Tkinter (Tk interface) program is an graphical user interface for
  the Python 2 scripting language.

  You should install the python2tkinter package if you'd like to use a graphical
  user interface for Python 2 programming.


pkgId: b7d8f929a208fbdef5afb692fb9643551bf0eb9d604d4f1f7cfa5bde0503c94b
name: python2-tools
arch: x86_64
version: 2.7.17
epoch: 0
release: 2.module+el8.3.0+7681+f1f02ded
summary: A collection of development tools included with Python 2
url: https://www.python.org/
rpm_license: Python
rpm_vendor: EuroLinux
rpm_group: Development/Tools
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: python2-2.7.17-2.module+el8.3.0+7681+f1f02ded.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-tools-2.7.17-2.module+el8.3.0+7681+f1f02ded.x86_64.rpm
checksum_type: sha256
description:
  This package includes several tools to help with the development of Python 2
  programs, including IDLE (an IDE with editing and debugging facilities), a
  color editor (pynche), and a python gettext program (pygettext.py).


pkgId: 8a05a9d0fa798e8ee17c2bb63221e4b53fbd5e4e921f5d1a762fe7603077fd4f
name: python2-virtualenv
arch: noarch
version: 15.1.0
epoch: 0
release: 19.module+el8.1.0+3507+d69c168d
summary: Tool to create isolated Python environments
url: http://pypi.python.org/pypi/virtualenv
rpm_license: MIT
rpm_vendor: EuroLinux
rpm_group: Development/Languages
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-virtualenv-15.1.0-19.module+el8.1.0+3507+d69c168d.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-virtualenv-15.1.0-19.module+el8.1.0+3507+d69c168d.noarch.rpm
checksum_type: sha256
description:
  virtualenv is a tool to create isolated Python environments. virtualenv
  is a successor to workingenv, and an extension of virtual-python. It is
  written by Ian Bicking, and sponsored by the Open Planning Project. It is
  licensed under an MIT-style permissive license


pkgId: 72a94a74192e1b4bc54a3f3afb30d20e502da19b9d4c565346081f89587389da
name: python2-wheel
arch: noarch
version: 0.31.1
epoch: 1
release: 2.module+el8.1.0+3725+aac5cd17
summary: Built-package format for Python
url: https://github.com/pypa/wheel
rpm_license: MIT
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: python-wheel-0.31.1-2.module+el8.1.0+3725+aac5cd17.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python2-wheel-0.31.1-2.module+el8.1.0+3725+aac5cd17.noarch.rpm
checksum_type: sha256
description:
  A built-package format for Python.

  A wheel is a ZIP-format archive with a specially formatted filename and the
  .whl extension. It is designed to contain all the files for a PEP 376
  compatible install in a way that is very close to the on-disk format.

  Python 2 version.


pkgId: 6c5275f9a13630f7d409d0eab49d895004a3b8c21830cac153f44c85df4b7f04
name: python3-abrt-addon
arch: x86_64
version: 2.10.9
epoch: 0
release: 20.el8
summary: abrt's addon for catching and analyzing Python 3 exceptions
url: https://abrt.readthedocs.org/
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: beast-developer-box-11ebc30
rpm_sourcerpm: abrt-2.10.9-20.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python3-abrt-addon-2.10.9-20.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains python 3 hook and python analyzer plugin for handling
  uncaught exception in python 3 programs.


pkgId: c69e07428e2ca298203df3bf35df4d3f2a536ffc0f42b549bd44459176294f07
name: python3-abrt-container-addon
arch: x86_64
version: 2.10.9
epoch: 0
release: 20.el8
summary: abrt's container addon for catching Python 3 exceptions
url: https://abrt.readthedocs.org/
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: beast-developer-box-11ebc30
rpm_sourcerpm: abrt-2.10.9-20.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python3-abrt-container-addon-2.10.9-20.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains python 3 hook and handling uncaught exception in python 3
  programs in container.


pkgId: 349de0839e4bf87153dc1f919137d7105da089dd6d69e1bf916bb9d913e53661
name: python3-argcomplete
arch: noarch
version: 1.9.3
epoch: 0
release: 6.el8
summary: Bash tab completion for argparse
url: https://github.com/kislyuk/argcomplete
rpm_license: ASL 2.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: python-argcomplete-1.9.3-6.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python3-argcomplete-1.9.3-6.el8.noarch.rpm
checksum_type: sha256
description:
  Argcomplete provides easy, extensible command line tab completion of
  arguments for your Python script.

  It makes two assumptions:

   * You are using bash as your shell
   * You are using argparse to manage your command line arguments/options

  Argcomplete is particularly useful if your program has lots of
  options or subparsers, and if your program can dynamically suggest
  completions for your argument/option values (for example, if the user
  is browsing resources over the network).

  Python 3 version.


pkgId: f894b9edd8f1b206bebc9031588928df71bf294ecb5229c5013d9e1492c7b1ca
name: python3-argh
arch: noarch
version: 0.26.1
epoch: 0
release: 8.el8
summary: Unobtrusive argparse wrapper with natural syntax
url: https://pypi.python.org/pypi/argh
rpm_license: LGPLv3+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: python-argh-0.26.1-8.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python3-argh-0.26.1-8.el8.noarch.rpm
checksum_type: sha256
description:
  Building a command-line interface?  Found yourself uttering “argh!”
  while struggling with the API of argparse?  Don’t want to lose its
  power but don’t need the complexity?

  python-argh provides a wrapper for argparse.  Argparse is a very powerful
  tool;  python-argh just makes it easy to use.


pkgId: 405f1a11f1d9b07386be269945d3d7542b8f944baf1f07ed18c12e19778c3920
name: python3-bind
arch: noarch
version: 9.11.20
epoch: 32
release: 5.el8_3.1
summary: A module allowing rndc commands to be sent from Python programs
url: http://www.isc.org/products/BIND/
rpm_license: MPLv2.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: bind-9.11.20-5.el8_3.1.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python3-bind-9.11.20-5.el8_3.1.noarch.rpm
checksum_type: sha256
description:
  This package provides a module which allows commands to be sent to rndc directly from Python programs.


pkgId: 25ba59403b3c0c634f6e7fcafc9ab7fbbd978df7a6f91bad0aeb5adf698ac150
name: python3-blockdev
arch: x86_64
version: 2.24
epoch: 0
release: 11.el8
summary: Python3 gobject-introspection bindings for libblockdev
url: https://github.com/storaged-project/libblockdev
rpm_license: LGPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: libblockdev-2.24-11.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python3-blockdev-2.24-11.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains enhancements to the gobject-introspection bindings for
  libblockdev in Python3.


pkgId: 0ee7b92dacc1025cf13e7a98959eeaf7cfdd3534b32733fa04d01779a84d9703
name: python3-brotli
arch: x86_64
version: 1.0.6
epoch: 0
release: 2.el8
summary: Lossless compression algorithm (python 3)
url: https://github.com/google/brotli
rpm_license: MIT
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-baseos
rpm_sourcerpm: brotli-1.0.6-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python3-brotli-1.0.6-2.el8.x86_64.rpm
checksum_type: sha256
description:
  Brotli is a generic-purpose lossless compression algorithm that compresses
  data using a combination of a modern variant of the LZ77 algorithm, Huffman
  coding and 2nd order context modeling, with a compression ratio comparable
  to the best currently available general-purpose compression methods.
  It is similar in speed with deflate but offers more dense compression.
  This package installs a Python 3 module.


pkgId: 2e186da4d7c3ad55bcb274a0796eef821c875f6143ee82b4530a0ccbe7adb690
name: python3-bson
arch: x86_64
version: 3.6.1
epoch: 0
release: 11.module+el8.1.0+3334+5cb623d7
summary: Python bson library
url: http://api.mongodb.org/python
rpm_license: ASL 2.0 and MIT
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-spinning
rpm_sourcerpm: python-pymongo-3.6.1-11.module+el8.1.0+3334+5cb623d7.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python3-bson-3.6.1-11.module+el8.1.0+3334+5cb623d7.x86_64.rpm
checksum_type: sha256
description:
  BSON is a binary-encoded serialization of JSON-like documents. BSON is designed
  to be lightweight, traversable, and efficient. BSON, like JSON, supports the
  embedding of objects and arrays within other objects and arrays.  This package
  contains the python3 version of this module.


pkgId: d95ccdf1d797558aa44ebb905069ba2c235ff22570693641bfc61d3cdf29e202
name: python3-bytesize
arch: x86_64
version: 1.4
epoch: 0
release: 3.el8
summary: Python 3 bindings for libbytesize
url: https://github.com/storaged-project/libbytesize
rpm_license: LGPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: libbytesize-1.4-3.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python3-bytesize-1.4-3.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains Python 3 bindings for libbytesize making the use of
  the library from Python 3 easier and more convenient.


pkgId: 06c639751ee226355e5a3028af1db8a5d646cef5fec6bc88dfd6e68c49b508bf
name: python3-click
arch: noarch
version: 6.7
epoch: 0
release: 8.el8
summary: Simple wrapper around optparse for powerful command line utilities
url: https://github.com/mitsuhiko/click
rpm_license: BSD
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: python-click-6.7-8.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python3-click-6.7-8.el8.noarch.rpm
checksum_type: sha256
description:
  click is a Python package for creating beautiful command line
  interfaces in a composable way with as little amount of code as necessary.
  It's the "Command Line Interface Creation Kit".  It's highly configurable but
  comes with good defaults out of the box.

  Python 3 version.


pkgId: 7955e4ac329a336d72a051e2488ee119a965e73c0fa55a771ced6adc91c127c1
name: python3-cups
arch: x86_64
version: 1.9.72
epoch: 0
release: 21.el8
summary: Python3 bindings for CUPS API, known as pycups.
url: http://cyberelk.net/tim/software/pycups/
rpm_license: GPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: python-cups-1.9.72-21.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python3-cups-1.9.72-21.el8.x86_64.rpm
checksum_type: sha256
description:
  This package provides Python 3 bindings for CUPS API,
  known as pycups. It was written for use with
  system-config-printer, but can be put to other uses as well.


pkgId: fd93ccde5910bc144c33a8903765de1b4ef6930981d68b6f5f348d0ada9ddeee
name: python3-custodia
arch: noarch
version: 0.6.0
epoch: 0
release: 3.module+el8.1.0+4098+f286395e
summary: Sub-package with python3 custodia modules
url: https://github.com/latchset/custodia
rpm_license: GPLv3+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-powertools
rpm_sourcerpm: custodia-0.6.0-3.module+el8.1.0+4098+f286395e.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python3-custodia-0.6.0-3.module+el8.1.0+4098+f286395e.noarch.rpm
checksum_type: sha256
description:
  Sub-package with python custodia modules


  Custodia is a Secrets Service Provider, it stores or proxies access to
  keys, password, and secret material in general. Custodia is built to
  use the HTTP protocol and a RESTful API as an IPC mechanism over a local
  Unix Socket. It can also be exposed to a network via a Reverse Proxy
  service assuming proper authentication and header validation is
  implemented in the Proxy.

  Custodia is modular, the configuration file controls how authentication,
  authorization, storage and API plugins are combined and exposed.


pkgId: 50f236299f5bb0969acd2fd0d91068c029cf46b093caa81d073a2dcd95bbbbb2
name: python3-dasbus
arch: noarch
version: 1.2
epoch: 0
release: 2.el8
summary: DBus library in Python 3
url: https://pypi.python.org/pypi/dasbus
rpm_license: LGPLv2+
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: python-dasbus-1.2-2.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python3-dasbus-1.2-2.el8.noarch.rpm
checksum_type: sha256
description:
  Dasbus is a DBus library written in Python 3, based on
  GLib and inspired by pydbus. It is designed to be easy
  to use and extend.


pkgId: 70bbeef18683f5dcb5cfa2d0d1147017a3cb92e9839f180df104cd9ec800a888
name: python3-dbus-client-gen
arch: noarch
version: 0.4
epoch: 0
release: 1.el8
summary: Library for Generating D-Bus Client Code
url: https://github.com/stratis-storage/dbus-client-gen
rpm_license: MPLv2.0
rpm_vendor: EuroLinux
rpm_group: Unspecified
rpm_buildhost: eurolinux-build-appstream
rpm_sourcerpm: python-dbus-client-gen-0.4-1.el8.src.rpm
rpm_packager: EuroLinux
location_href: Packages/p/python3-dbus-client-gen-0.4-1.el8.noarch.rpm
checksum_type: sha256
description:
  This library contains a few methods that consume an XML specification
  of a D-Bus interface and return classes or functions that may be useful
  in constructing a python D-Bus client. The XML specification has the format
  of the data returned by the Introspect() method
  of the Introspectable interface.

  Python 3 version.


